目的 探究纳米颗粒对聚酰亚胺薄膜热稳定性的影响规律及影响机理。 方法 采用原位聚合法制备 TiO2 含量不同的 PI-TiO2 纳米复合薄膜,通过差热热重法分析复合薄膜的热稳定性,?旄春媳∧ぜ尤群蟮奈⒐坌蚊?探讨复合薄膜的耐热机理。 结果 纳米颗粒的加入提高了薄膜的热稳定性,PI-5% TiO2 复合薄膜失重 10% 和 50% 时的温度分别较纯 PI 膜提高了 19. 3 ℃和 20. 7 ℃ 。 复合薄膜的 DTA曲线峰顶温度均高于纯 PI 膜,PI-5% TiO2 复合薄膜峰顶温度为 637. 8 ℃ ,较纯 PI 膜提升了 40. 1 ℃ 。 随着 TiO2 含量的增加,复合薄膜 DTA 曲线反应峰峰型逐渐变窄、增高且变得尖锐,复合薄膜的导热性能有所提高。 结论 纳米颗粒阻碍了聚酰亚胺分子的热运动,减缓了薄膜在分解过程中产生的空洞区域的扩散。 聚酰亚胺基体中的纳米颗粒在薄膜中形成骨架结构,提高了薄膜的导热性和刚性。 聚酰亚胺与纳米颗粒形成有机-无机相界面,界面层的聚酰亚胺分子具有更好的热稳定性,使得薄膜的反应热焓值增加。

Objective To explore the influence of nanoparticles on thermal stability of polyimide film and the influence mechanism. Methods In-situ polymerization was adopted to prepare the PI/ TiO2 nanocomposite film, and the thermal stability and micro-structure of composite film were tested through DTA-TGA and SEM. The composite film microstructure was observed after heating to explore the mechanism of heat-resistant composite film by differential thermal analysis. Results The results showed that the nano-particles increased the thermal stability of film. The temperature of 5% composite film increased by 19. 3 ℃ and 20. 7 ℃ under weightlessness of 10% and 50% respectively, compared to the pure film. The peak temperature of film with 5% component was 637. 8 ℃ , increased by 40. 1 ℃ compared to the pure film. Through comparing the pattern of reaction peak, it can be found that the reaction peak of pure film was wide and smooth, while that of three kinds of composite films became narrow with the increase of components with higher and sharp pattern, indicating that the PI composition was fiercer and concentrated in the composite film. Conclusion The study indicated that the nano-particles hindered the thermal motion of PI and slowed down the void spread of film in the process of decomposition. The nano-particles formed the skeleton structure in the matrix, improving the thermal conductivity and rigidity of film. PI molecules at the interface of organic-inorganic phase interface had better thermal stability.