肖磊,马跃进,赵建国,曲平,张印勇.等离子喷涂改善秸秆压块机模块耐磨性的研究[J].表面技术,2012,(3):87-89,93.
XIAO Lei,MA Yue-jin,ZHAO Jian-guo,QU Ping,ZHANG Yin-yong.Research on Enhancement of Wear Resistance of the Straw Press Block Module by Plasma Spraying Technology[J].Surface Technology,2012,(3):87-89,93
等离子喷涂改善秸秆压块机模块耐磨性的研究
Research on Enhancement of Wear Resistance of the Straw Press Block Module by Plasma Spraying Technology
投稿时间:2012-03-09  修订日期:2012-06-20
DOI:
中文关键词:  压块机  模块  等离子喷涂  耐磨性
英文关键词:straw press block  module  plasma spraying  wear resistance
基金项目:河北省杰出青年基金(E2011204036)
作者单位
肖磊 河北农业大学机电工程学院,保定071001 
马跃进 河北农业大学机电工程学院,保定071001 
赵建国 河北农业大学机电工程学院,保定071001 
曲平 河北农业大学机电工程学院,保定071001 
张印勇 河北农业大学机电工程学院,保定071001 
AuthorInstitution
XIAO Lei Mechanical and Electrical Engineering College, Agricultural University of Hebei, Baoding 071001, China 
MA Yue-jin Mechanical and Electrical Engineering College, Agricultural University of Hebei, Baoding 071001, China 
ZHAO Jian-guo Mechanical and Electrical Engineering College, Agricultural University of Hebei, Baoding 071001, China 
QU Ping Mechanical and Electrical Engineering College, Agricultural University of Hebei, Baoding 071001, China 
ZHANG Yin-yong Mechanical and Electrical Engineering College, Agricultural University of Hebei, Baoding 071001, China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对当前秸秆压块机模块耐磨性差、易失效等问题,分析了模块失效机理,提出了采用等离子喷涂改善模块表面性能。通过试验,研究了电压、电流及喷涂距离等因素对材料耐磨性的影响,优化了等离子喷涂工艺参数。结果表明:喷涂电流的影响最为显著,其次是喷涂距离;等离子喷涂Ni60+50WC涂层后,试样的抗磨损性能大幅提高。
英文摘要:
      In allusion to the problems of bad wear resistance and easy efficiency-losing, etc. of the current straw press block, the failure mechanism of the module was analyzed, a new technology on improving the properties of the module surface by plasma spraying was put forward. The effect of the voltage, electric current, spraying distance and so on on the material wear resistance was studied through test, the technological parameters of plasma spraying were optimized. The results show that the spraying current influences most significantly, and followed by the spraying distance; After the plasma spraying Ni60+50WC coating sample, wear resistance of the test sample increases greatly.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20631749位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号