李佑斌,邹洪庆.塑料脱漆剂的设计[J].表面技术,2007,36(6):87-90.
LI You-bin,ZOU Hong-qing.The design of Plastic Paint Remover[J].Surface Technology,2007,36(6):87-90 |
| 塑料脱漆剂的设计 |
| The design of Plastic Paint Remover |
| 投稿时间：2007-06-01 修订日期：2007-12-10 |
| DOI： |
| 中文关键词: 塑料脱漆剂 经验总结 设计思路 |
| 英文关键词:Plastic paint remover Experience summary Design thinking |
| 基金项目: |
| 作者 | 单位 |
| 李佑斌 | 天津大学材料科学与工程学院，天津300072 |
| 邹洪庆 | 中国兵器工业第59研究所，重庆400039 |
|
| Author | Institution |
| LI You-bin | Materials Science and Engineering College of Tianjin University, Tianjin 300072, China |
| ZOU Hong-qing | No. 59 Institute of China Ordnance Industry, Chongqing 400039, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 由于塑料具有许多优良的特点，在诸多领域获得了广泛的应用，塑料的涂装技术也因此获得了迅猛发展。塑料涂装要求严格，稍有不慎，涂层质量难以满足使用要求，必须退掉重涂，塑料退漆剂的研制引起了人们的重视。塑料退漆的难点在于漆层被退掉的同时，塑料底材不被溶解。以溶剂的相似相溶性规律、溶解度参数相近规律和溶剂化规律为基础，探讨了塑料退漆剂的设计思路，介绍了设计经验，并简要叙述了助剂的选择原则。 |
| 英文摘要: |
| The painting process of plastic get rapiddly development because of excellent characteristics of plastic and its widely application in many fields. The painting process of plastic has strict requirement for coating quality. If coating quality cant achieve use requirement, the coating must be recoated. So the preparation of plastic paint remover is paid attention to. The difficulty of plastic paint removing is that the pastic base cant be dissolved when the coating is being removed. Based on the similar compatibility rule, similarity rule of solubility parameter and solventing rule of solvent, the design thinking of pastic paint remover was discussed, the design experience was introduced and the choice principle of auxiliary agent was resumed. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号