Research Progress on Surface Treatment Methods of Alloys for Fiber Metal Laminates

ZHAO Yuhang, ZHANG Xuan, LI Ze, YUAN Yong, WANG Zixun, JU Bowen

Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 236-251.

PDF(18386 KB)
PDF(18386 KB)
Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 236-251. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.021
Equipment Surface Engineering

Research Progress on Surface Treatment Methods of Alloys for Fiber Metal Laminates

  • ZHAO Yuhang, ZHANG Xuan, LI Ze, YUAN Yong*, WANG Zixun, JU Bowen
Author information +
History +

Abstract

Fiber metal laminates (FMLs) are fabricated by alternately stacking ultra-thin high-strength metal sheets and fiber-reinforced resin layers. By integrating the complementary advantages of metallic alloys and fiber-reinforced polymer composites, FMLs exhibit exceptional properties including low density, high specific strength, superior damage tolerance, and outstanding fatigue resistance. Accordingly, FMLs have broad application prospects in aerospace, rail transit, high-end equipment and other fields. In recent years, FMLs based on aluminum, titanium and steel matrices have been extensively developed. These FML systems have been successfully implemented in critical structural components such as engine fairings, fixed trailing edges, wing panels, helicopter blades, space optical benches and hull structures. Nevertheless, the substantial disparity in physicochemical properties between metallic sheets and resin matrices, coupled with residual thermal stresses and strains generated during fabrication and long-term service, commonly leads to inadequate interfacial bonding strength, interlaminar delamination and progressive degradation of structural durability. These interfacial failure issues constitute the primary technical bottleneck restricting further improvements in the overall mechanical performance and service reliability of FMLs.
To enhance the interfacial strength between alloy layers and fiber-reinforced composites, researchers have proposed various strategies such as metal surface treatment, resin modification, process optimization. Among these strategies, alloy surface treatment has been recognized as a highly versatile and widely implemented technique, owing to its capability for multi-dimensional interfacial reinforcement and good compatibility with other fabrication processes. By tailoring the surface morphology, chemical composition and surface energy of alloy substrates, this approach facilitates the formation of mechanical interlocking, chemical bonding and interfacial transition layers. These interfacial modifications collectively contribute to a substantial enhancement in the interlaminar bonding performance and long-term service stability of FMLs.
This work systematically reviews the mainstream alloy surface treatment processes for FMLs, including mechanical treatment (mechanical abrasion and sandblasting), chemical treatment (chemical etching and coupling agent modification), electrochemical treatment (anodization and micro-arc oxidation), energy-based treatment (plasma treatment and laser treatment), and surface additive treatment. The fundamental working mechanisms, applicable alloy systems, interfacial modification principles and typical interfacial failure modes associated with each treatment route are elaborated in detail. Particular attention is paid to their quantitative effects on the interfacial bonding strength of FMLs, as well as the strong dependence of modification performance on key process parameters. The technical characteristics of different treatment processes in surface roughness control, oxide film fabrication and active site introduction, as well as their varying effects on the typical aluminum, titanium and steel substrates, are compared and analyzed. Meanwhile, the strengths and limitations of these treatment processes in terms of interfacial bonding improvement, application scenarios, operational costs and environmental impacts are discussed. On this basis, the critical limitations of single-step surface treatment processes are summarized, including relatively monotonous strengthening mechanisms, insufficient long-term process stability, non-negligible environmental concerns, and limited adaptability to ultrathin metal foils that are widely used in advanced lightweight FMLs. Furthermore, the merits of multi-mechanism synergistic reinforcement afforded by combined surface treatments are summarized. Such integrated strategies enable the concurrent optimization of surface micromorphology, chemical composition, and interfacial energy of alloys through multi-procedural and multi-field-coupled modification, thereby establishing a hierarchical and robust alloy-resin interfacial architecture. In view of the industrial demand for lightweight design and the deficiencies of existing alloy surface treatment methods for FMLs, the future development trends are prospected from the aspects of green manufacturing, high precision, low damage, multi-scale interfacial design and quantitative prediction via numerical simulation. This work provides a systematic framework and technical guidance for the research, development and engineering application of interfacial regulation technologies for high-performance FMLs.

Key words

fiber metal laminates / surface treatment / interfacial bonding / alloy system / mechanical properties / failure mechanism

Cite this article

Download Citations
ZHAO Yuhang, ZHANG Xuan, LI Ze, YUAN Yong, WANG Zixun, JU Bowen. Research Progress on Surface Treatment Methods of Alloys for Fiber Metal Laminates[J]. Surface Technology. 2026, 55(21): 236-251

References

[1] YANG Y, XU F.Experimental and Numerical Investigation on Hypervelocity Impact Response of 2D Plain- Woven C/SiC Composite[J]. Journal of Mechanical Science and Technology, 2015, 29(1): 11-16.
[2] LOGANATHAN T G, KRISHNAMURTHY R, CHANDRASEKARAN K.Significance of Cyclic Loading Parameters on the Flexural Response of the GFRP Composites[J]. Journal of Mechanical Science and Technology, 2016, 30(7): 3127-3136.
[3] DA COSTA A A, DA SILVA D F N R, TRAVESSA D N, et al. The Effect of Thermal Cycles on the Mechanical Properties of Fiber-Metal Laminates[J]. Materials & Design, 2012, 42: 434-440.
[4] JAKUBCZAK P, BIENIAŚ J.The Response of Hybrid Titanium Carbon Laminates to the Low-Velocity Impact[J]. Engineering Fracture Mechanics, 2021, 246: 107608.
[5] LIN C T, KAO P W, YANG F S.Fatigue Behaviour of Carbon Fibre-Reinforced Aluminium Laminates[J]. Composites, 1991, 22(2): 135-141.
[6] SINMAZÇELIK T, AVCU E, BORA M Ö, et al. A Review: Fibre Metal Laminates, Background, Bonding Types and Applied Test Methods[J]. Materials & Design, 2011, 32(7): 3671-3685.
[7] SADIGHI M, ALDERLIESTEN R C, BENEDICTUS R.Impact Resistance of Fiber-Metal Laminates: A Review[J]. International Journal of Impact Engineering, 2012, 49: 77-90.
[8] ALDERLIESTEN R, RANS C, BENEDICTUS R.The Applicability of Magnesium Based Fibre Metal Laminates in Aerospace Structures[J]. Composites Science and Technology, 2008, 68(14): 2983-2993.
[9] MIR M, ALI M N, SAMI J, et al.Review of Mechanics and Applications of Auxetic Structures[J]. Advances in Materials Science and Engineering, 2014, 2014: 753496.
[10] MIR M, ANWAR SIDDIQI S, HUSSAIN T, et al.Synthesis and Characterization of Calcium Deficient Apatite Granules for Drug Eluting Bone Graft Applications[J]. Ceramics International, 2014, 40(7): 10719-10725.
[11] ABBAS G, IRFAN A, MIR M, et al.Electronic Structure and Absorption Spectra of 6-Picoline Schiff Base: A DFT and XRD Based Approach[J]. Journal of Molecular Structure, 2013, 1050: 10-14.
[12] KHAN U A, HUSSAIN A, SHAH M, et al.Investigation of Mechanical Properties Based on Grain Growth and Microstructure Evolution of Alumina Ceramics during Two Step Sintering Process[J]. IOP Conference Series: Materials Science and Engineering, 2016, 146(1): 012046.
[13] KOLESNIKOV B, HERBECK L, FINK A.CFRP/Titanium Hybrid Material for Improving Composite Bolted Joints[J]. Composite Structures, 2008, 83(4): 368-380.
[14] ZHU W, XIAO H, WANG J, et al.Characterization and Properties of AA6061-Based Fiber Metal Laminates with Different Aluminum-Surface Pretreatments[J]. Composite Structures, 2019, 227: 111321.
[15] GUO Y Q, CHEN Z F, LI F Z, et al.Study on Formability and Failure Modes of Steel/CFRP Based FMLS Consisting of Carbon Fiber Reinforced Polymer Prepreg and Steel Sheet[J]. Composite Structures, 2022, 281: 114980.
[16] ARENAS J M, ALÍA C, NARBÓN J J, et al. Considerations for the Industrial Application of Structural Adhesive Joints in the Aluminium-Composite Material Bonding[J]. Composites Part B: Engineering, 2013, 44(1): 417-423.
[17] BARNES T A, PASHBY I R.Joining Techniques for Aluminium Spaceframes Used in Automobiles Part II: Adhesive Bonding and Mechanical Fasteners[J]. Journal of Materials Processing Technology, 2000, 99(1/2/3): 72-79.
[18] MACHADO J J M, MARQUES E A S, CAMPILHO R D S G, et al. Mode II Fracture Toughness of CFRP as a Function of Temperature and Strain Rate[J]. Composites Part B: Engineering, 2017, 114: 311-318.
[19] MEHR M E, AGHAMOHAMMADI H, ABBANDANAK S N H, et al. Effects of Applying a Combination of Surface Treatments on the Mechanical Behavior of Basalt Fiber Metal Laminates[J]. International Journal of Adhesion and Adhesives, 2019, 92: 133-141.
[20] BAKHBERGEN U, ABBASSI F, KALIMULDINA G, et al.Recent Approaches of Interface Strengthening in Fibre Metal Laminates: Processes, Measurements, Properties and Numerical Analysis[J]. Composites Part B: Engineering, 2024, 285: 111744.
[21] MEI L, HE X D, LI Y B, et al.Enhancement of Composite-Metal Interfacial Adhesion Strength by Dendrimer[J]. Surface and Interface Analysis, 2011, 43(3): 726-733.
[22] KHALID M Y, ARIF Z U, AL RASHID A, et al.Interlaminar Shear Strength (ILSS) Characterization of Fiber Metal Laminates (FMLS) Manufactured through VARTM Process[J]. Forces in Mechanics, 2021, 4: 100038.
[23] AGHAMOHAMMADI H, HOSSEINI ABBANDANAK S N, ESLAMI-FARSANI R, et al. Effects of Various Aluminum Surface Treatments on the Basalt Fiber Metal Laminates Interlaminar Adhesion[J]. International Journal of Adhesion and Adhesives, 2018, 84: 184-193.
[24] ZHU W, XIAO H, WANG J, et al.Effect of Different Coupling Agents on Interfacial Properties of Fibre-Reinforced Aluminum Laminates[J]. Materials, 2021, 14(4): 1019.
[25] ALFANO M, LUBINEAU G, FURGIUELE F, et al.Study on the Role of Laser Surface Irradiation on Damage and Decohesion of Al/Epoxy Joints[J]. International Journal of Adhesion and Adhesives, 2012, 39: 33-41.
[26] PAN Y C, WU G Q, HUANG Z, et al.Effects of Surface Pre-Treatments on Mode Ⅰ and Mode Ⅱ Interlaminar Strength of CFRP/Mg Laminates[J]. Surface and Coatings Technology, 2017, 319: 309-317.
[27] YANG G X, YANG T, YUAN W H, et al.The Influence of Surface Treatment on the Tensile Properties of Carbon Fiber-Reinforced Epoxy Composites-Bonded Joints[J]. Composites Part B: Engineering, 2019, 160: 446-456.
[28] TAN B, HU Y S, YUAN B Y, et al.Optimizing Adhesive Bonding between CFRP and Al Alloy Substrate through Resin Pre-Coating by Filling Micro-Cavities from Sandblasting[J]. International Journal of Adhesion and Adhesives, 2021, 110: 102952.
[29] MOHAMAD M, AHMAD MARZUKI H F, UBAIDILLAH E A E, et al. Effect of Surface Roughness on Mechanical Properties of Aluminium-Carbon Laminates Composites[C]//Advanced Materials Conference (Langkawi, Malaysia). 2014, 879: 51-55.
[30] WANG F Y, BU H C, MA W P, et al.Influence of the Different Surface Treatments on Fracture Property of CFRP Adhesive Joint[J]. Journal of Adhesion Science and Technology, 2023, 37(6): 961-975.
[31] BALKUNDHI M, BALOOR S S, BOLAR G.Assessment of Surface Treatment Methods for Strengthening the Interfacial Adhesion in CARALL Fiber Metal Laminates[J]. Scientific Reports, 2024, 14: 30909.
[32] 林文强, 廖典科. GFRP/铝合金黏接剪切强度受表面形貌的影响分析[J]. 黏接, 2020, 41(2): 34-37.
LIN W Q, LIAO D K.Analysis of the Influence of GFRP/Aluminum Alloy Bond Shear Strength on Surface Morphology[J]. Adhesion, 2020, 41(2): 34-37.
[33] RUDAWSKA A, DANCZAK I, MÜLLER M, et al. The Effect of Sandblasting on Surface Properties for Adhesion[J]. International Journal of Adhesion and Adhesives, 2016, 70: 176-190.
[34] RUDAWSKA A, MITURSKA I.Impact Study of Single Stage and Multi Stage Abrasive Machining on Static Strength of Lap Adhesive Joints of Mild Steel[C]//3rd International Scientific Conference on Innovative Technologies in Engineering Production (ITEP). 2018, 244: 02006.
[35] GOMES A L, CASTILLO-OYAGÜE R, LYNCH C D, et al. Influence of Sandblasting Granulometry and Resin Cement Composition on Microtensile Bond Strength to Zirconia Ceramic for Dental Prosthetic Frameworks[J]. Journal of Dentistry, 2013, 41(1): 31-41.
[36] KHAN A A, AL KHERAIF A A, ALHIJJI S M, et al. Effect of Grit-Blasting Air Pressure on Adhesion Strength of Resin to Titanium[J]. International Journal of Adhesion and Adhesives, 2016, 65: 41-46.
[37] WANG B H, HU X Z, LU P M.Improvement of Adhesive Bonding of Grit-Blasted Steel Substrates by Using Diluted Resin as a Primer[J]. International Journal of Adhesion and Adhesives, 2017, 73: 92-99.
[38] 段瑛涛, 武肖鹏, 王智文, 等. 碳纤维增强树脂复合材料-热成型钢超混杂层合板层间力学性能[J]. 复合材料学报, 2020, 37(10): 2418-2427.
DUAN Y T, WU X P, WANG Z W, et al.Interlaminar Mechanical Properties of Carbon Fiber Reinforced Plastics-Thermoformed Steel Super-Hybrid Laminates[J]. Acta Materiae Compositae Sinica, 2020, 37(10): 2418-2427.
[39] HALLMANN L, ULMER P, REUSSER E, et al.Effect of Blasting Pressure, Abrasive Particle Size and Grade on Phase Transformation and Morphological Change of Dental Zirconia Surface[J]. Surface and Coatings Technology, 2012, 206(19/20): 4293-4302.
[40] VAN TOL A F, TIBBALLS J E, ROAR GJERDET N, et al. Experimental Investigation of the Effect of Surface Roughness on Bone-Cement-Implant Shear Bond Strength[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2013, 28: 254-262.
[41] MOHAMMADI Z, ZIAEI-MOAYYED A A, MESGAR A S. Grit Blasting of Ti-6Al-4V Alloy: Optimization and Its Effect on Adhesion Strength of Plasma-Sprayed Hydroxyapatite Coatings[J]. Journal of Materials Processing Technology, 2007, 194(1/2/3): 15-23.
[42] 徐飞. 优化Ti/PEEK黏结性能的钛板表面处理工艺研究[D]. 南京: 南京航空航天大学, 2014.
XU F.Study on the Optimized Process of Enhancing the Adhesive Bonding Strength between Ti/PEEK[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2014.
[43] OSTAPIUK M, SUROWSKA B, BIENIAŚ J, et al.Structure Characteristics in Glass/Aluminium Hybrid Laminates after Bending Strength Test[J]. Composites Theory and Practice, 2013(4): 237-240.
[44] SCHONHORN H, RYAN F W, HANSEN R H.Surface Treatment of Polypropylene for Adhesive Bonding[J]. The Journal of Adhesion, 1970, 2(2): 93-99.
[45] PROLONGO S G, UREÑA A. Effect of Surface Pre- Treatment on the Adhesive Strength of Epoxy-Aluminium Joints[J]. International Journal of Adhesion and Adhesives, 2009, 29(1): 23-31.
[46] DROŹDZIEL-JURKIEWICZ M, BIENIAŚ J. Evaluation of Surface Treatment for Enhancing Adhesion at the Metal-Composite Interface in Fibre Metal-Laminates[J]. Materials, 2022, 15(17): 6118.
[47] PENG H, ZHOU T, FAN Y S, et al.Recent Advances in Aluminum Alloy Surface Treatment Technology and Bonding Properties[J]. Physica Status Solidi (a), 2025, 222(6): 2400715.
[48] SALEEMA N, SARKAR D K, PAYNTER R W, et al.A Simple Surface Treatment and Characterization of AA 6061 Aluminum Alloy Surface for Adhesive Bonding Applications[J]. Applied Surface Science, 2012, 261: 742-748.
[49] GONZALEZ-CANCHE N G, FLORES-JOHNSON E A, CORTES P, et al. Evaluation of Surface Treatments on 5052-H32 Aluminum Alloy for Enhancing the Interfacial Adhesion of Thermoplastic-Based Fiber Metal Laminates[J]. International Journal of Adhesion and Adhesives, 2018, 82: 90-99.
[50] CHEN M G, LI H Z, ZHANG X M.Improvement of Shear Strength of Aluminium-Polypropylene Lap Joints by Grafting Maleic Anhydride Onto Polypropylene[J]. International Journal of Adhesion and Adhesives, 2007, 27(3): 175-187.
[51] 武肖鹏. GFRP/铝合金超混杂复合材料层间力学性能改进研究[D]. 重庆: 重庆大学, 2020.
WU X P.Study on the Improvement of Interlaminar Mechanical Properties of GFRP/Aluminum Alloy Super- Hybrid Composite[D]. Chongqing: Chongqing University, 2020.
[52] KOKUBO T, MIYAJI F, KIM H M, et al.Spontaneous Formation of Bonelike Apatite Layer on Chemically Treated Titanium Metals[J]. Journal of the American Ceramic Society, 1996, 79(4): 1127-1129.
[53] SHANMUGAM L, KAZEMI M E, et al.Improved Bonding Strength between Thermoplastic Resin and Ti Alloy with Surface Treatments by Multi-Step Anodization and Single-Step Micro-Arc Oxidation Method: A Comparative Study[J]. ES Materials & Manufacturing, 2019, 3: 57-65.
[54] 马威, 管海陆, 张晓琼, 等. 碳纤维/不锈钢极薄带纤维金属层板制备工艺及其弯曲性能[J]. 复合材料学报, 2024, 41(2): 1047-1057.
MA W, GUAN H L, ZHANG X Q, et al.Preparation Process and Bending Properties of CFRP/Stainless Steel Ultra-Thin Strip Fiber Metal Laminates[J]. Acta Materiae Compositae Sinica, 2024, 41(2): 1047-1057.
[55] MAMALIS D, OBANDE W, KOUTSOS V, et al.Novel Thermoplastic Fibre-Metal Laminates Manufactured by Vacuum Resin Infusion: The Effect of Surface Treatments on Interfacial Bonding[J]. Materials & Design, 2019, 162: 331-344.
[56] 段文博. 钛板表面碱蚀改性对Ti/APC-2层合板界面及力学性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2022.
DUAN W B.Study on the Interface and Mechanical Properties of Ti/APC-2 Laminates by Alkaline Etching Surface Modification of Titanium Alloy[D]. Harbin: Harbin Institute of Technology, 2022.
[57] ZHU W, XIAO H, WANG J, et al.Effect of Coupling Agent Quantity on Composite Interface Structure and Properties of Fiber Metal Laminates[J]. Polymer Composites, 2021, 42(7): 3195-3205.
[58] 张焱琴, 杨丽霞, 谢鹏波. 硅烷偶联剂在金属表面预处理中的应用研究进展[J]. 材料保护, 2017, 50(12): 67-73.
ZHANG Y Q, YANG L X, XIE P B.Research Progress of Application of Silane Coupling Agents in Pretreatment of Metal Surface[J]. Materials Protection, 2017, 50(12): 67-73.
[59] BERTELSEN C M, BOERIO F J.Linking Mechanical Properties of Silanes to Their Chemical Structure: An Analytical Study of Γ-GPS Solutions and Films[J]. Progress in Organic Coatings, 2001, 41(4): 239-246.
[60] AAKKULA J, SAARELA O.Silane Based Field Level Surface Treatment Methods for Aluminium, Titanium and Steel Bonding[J]. International Journal of Adhesion and Adhesives, 2014, 48: 268-279.
[61] LI X P, XU D H, GONG N N, et al.Improving the Strength of Injection Molded Aluminum/Polyphenylene Sulfide Lap Joints Dependence on Surface Microstructure and Composition[J]. Materials & Design, 2019, 179: 107875.
[62] PARK S Y, CHOI W J.Investigation on the Effectiveness of Silane-Based Field Level Surface Treatments of Aluminum Substrates for On-Aircraft Bonded Repairs[J]. International Journal of Adhesion and Adhesives, 2019, 95: 102414.
[63] SUROWSKA B, OSTAPIUK M, JAKUBCZAK P, et al.The Durability of an Organic-Inorganic Sol-Gel Interlayer in Al-GFRP-CFRP Laminates in a Saline Environment[J]. Materials, 2019, 12(15): 2362.
[64] OSTAPIUK M, LOUREIRO M V, BIENIAŚ J, et al.Interlaminar Shear Strength Study of Mg and Carbon Fiber-Based Hybrid Laminates with Self-Healing Microcapsules[J]. Composite Structures, 2021, 255: 113042.
[65] YU B, HE P G, JIANG Z Y, et al.Interlaminar Fracture Properties of Surface Treated Ti-CFRP Hybrid Composites under Long-Term Hygrothermal Conditions[J]. Composites Part A: Applied Science and Manufacturing, 2017, 96: 9-17.
[66] 马轲, 刘博亚, 马叙, 等. 一种碳纤维增强铝合金层合板制备及其层间增韧方法: 中国, CN202110907239.7[P].2021-10-26.
MA K, LIU B Y, MA X, et al. A Method for Preparing and Interlaminar Toughening of Carbon Fiber Aluminum Alloy Laminates: China, 202110907239.7 [P].2021-08-09.
[67] OHGAI T, HOFFER X, GRAVIER L, et al.Electrochemical Surface Modification of Aluminium Sheets for Application to Nano-Electronic Devices: Anodization Aluminium and Electrodeposition of Cobalt-Copper[J]. Journal of Applied Electrochemistry, 2004, 34(10): 1007-1012.
[68] MERTENS T, KOLLEK H.On the Stability and Composition of Oxide Layers on Pre-Treated Titanium[J]. International Journal of Adhesion and Adhesives, 2010, 30(6): 466-477.
[69] 孙煜, 刘强, 武肖鹏. 不同表面处理工艺对钛合金/复合材料胶接强度影响机理研究[J]. 武汉理工大学学报, 2021, 43(3): 7-12.
SUN Y, LIU Q, WU X P.Study on Mechanism of Different Surface Treatment Processes on Bonding Strength of Titanium Alloy/Composite[J]. Journal of Wuhan University of Technology, 2021, 43(3): 7-12.
[70] SAENZ DE MIERA M, CURIONI M, SKELDON P, et al. Modelling the Anodizing Behaviour of Aluminium Alloys in Sulphuric Acid through Alloy Analogues[J]. Corrosion Science, 2008, 50(12): 3410-3415.
[71] ELABAR D, LA MONICA G R, SANTAMARIA M, et al. Anodizing of Aluminium and Aa 2024-T3 Alloy in Chromic Acid: Effects of Sulphate on Film Growth[J]. Surface and Coatings Technology, 2017, 309: 480-489.
[72] WANG Q L, LI H J.Study on Anodic Oxidation of 2099 Aluminum Lithium Alloy and Sealing Treatment in Environmental Friendly Solutions[J]. International Journal of Electrochemical Science, 2023, 18(7): 100186.
[73] GABOR R, DOUBKOVA M, GOROSOVA S, et al.Preparation of Highly Wettable Coatings on Ti-6Al-4V ELI Alloy for Traumatological Implants Using Micro-Arc Oxidation in an Alkaline Electrolyte[J]. Scientific Reports, 2020, 10: 19780.
[74] LI G Q, MA F C, LIU P, et al.Review of Micro-Arc Oxidation of Titanium Alloys: Mechanism, Properties and Applications[J]. Journal of Alloys and Compounds, 2023, 948: 169773.
[75] GAO H T, ZHANG M, YANG X, et al.Effect of Na2SiO3 Solution Concentration of Micro-Arc Oxidation Process on Lap-Shear Strength of Adhesive-Bonded Magnesium Alloys[J]. Applied Surface Science, 2014, 314: 447-452.
[76] PAN Y C, WU G Q, CHENG X, et al.Galvanic Corrosion Behaviour of Carbon Fibre Reinforced Polymer/Magnesium Alloys Coupling[J]. Corrosion Science, 2015, 98: 672-677.
[77] ZUO S H, CHENG F, YANG G M, et al.An Effective Micro-Arc Oxidation (MAO) Treatment on Aluminum Alloy for Stronger Bonding Joint with Carbon Fiber Composites[J]. Composites Part A: Applied Science and Manufacturing, 2024, 177: 107919.
[78] SUN S Q, PAN Y C, WU G Q, et al.Effect of Electrolyte Composition Ratio of Micro-Arc Oxidation on Interlaminar Strength of CFRP/Mg Laminates[J]. International Journal of Adhesion and Adhesives, 2018, 87: 98-104.
[79] XIE M, ZHAN L H, MA B L, et al.Classification of Fiber Metal Laminates (FMLS), Adhesion Theories and Methods for Improving Interfacial Adhesion: A Review[J]. Thin- Walled Structures, 2024, 198: 111744.
[80] MAN H C, CHIU K Y, GUO X.Laser Surface Micro- Drilling and Texturing of Metals for Improvement of Adhesion Joint Strength[J]. Applied Surface Science, 2010, 256(10): 3166-3169.
[81] LI D, XIONG M, WANG S, et al.Effects of Low- Temperature Plasma Treatment on Wettability of Glass Surface: Molecular Dynamic Simulation and Experimental Study[J]. Applied Surface Science, 2020, 503: 144257.
[82] MUI T S M, SILVA L L G, PRYSIAZHNYI V, et al. Surface Modification of Aluminium Alloys by Atmospheric Pressure Plasma Treatments for Enhancement of Their Adhesion Properties[J]. Surface and Coatings Technology, 2017, 312: 32-36.
[83] DONG X M, LIU J G, HAO H Q, et al.Effects of Different Surface Treatment Processes on Bonding Properties of Aluminum Alloys under Full Temperature Field Environment[J]. Crystals, 2023, 13(8): 1240.
[84] LIN Y Y, LI H G, WANG Q, et al.Effect of Plasma Surface Treatment of Aluminum Alloy Sheet on the Properties of Al/Gf/PP Laminates[J]. Applied Surface Science, 2020, 507: 145062.
[85] PRYSIAZHNYI V, ZAPOROJCHENKO V, KERSTEN H, et al.Influence of Humidity on Atmospheric Pressure Air Plasma Treatment of Aluminium Surfaces[J]. Applied Surface Science, 2012, 258(14): 5467-5471.
[86] LABAN O, MAHDI E.Enhancing Mode I Inter-Laminar Fracture Toughness of Aluminum/Fiberglass Fiber-Metal Laminates by Combining Surface Pre-Treatments[J]. International Journal of Adhesion and Adhesives, 2017, 78: 234-239.
[87] NESTLER D, TRAUTMANN M, NENDEL S, et al.Innovative Hybrid Laminates of Aluminium Alloy Foils and Fibre-Reinforced Thermoplastic Layers: Innovative Hybride Laminate Aus Aluminiumlegierungsfolien Und Faserverstärkten Thermoplastischen Schichten[J]. Materialwissenschaft und Werkstofftechnik, 2016, 47(11): 1121-1131.
[88] WU Y R, LIN J P, CARLSON B E, et al.Effect of Laser Ablation Surface Treatment on Performance of Adhesive- Bonded Aluminum Alloys[J]. Surface and Coatings Technology, 2016, 304: 340-347.
[89] PALMIERI F L, WATSON K A, MORALES G, et al.Laser Ablative Surface Treatment for Enhanced Bonding of Ti-6Al-4V Alloy[J]. ACS Applied Materials & Interfaces, 2013, 5(4): 1254-1261.
[90] MARESSA P, ANODIO L, BERNASCONI A, et al.Effect of Surface Texture on the Adhesion Performance of Laser Treated Ti6Al4V Alloy[J]. The Journal of Adhesion, 2015, 91(7): 518-537.
[91] ALFANO M, PINI S, CHIODO G, et al.Surface Patterning of Metal Substrates through Low Power Laser Ablation for Enhanced Adhesive Bonding[J]. The Journal of Adhesion, 2014, 90(5/6): 384-400.
[92] ROTELLA G, ALFANO M, SCHIEFER T, et al.Enhancement of Static Strength and Long Term Durability of Steel/Epoxy Joints through a Fiber Laser Surface Pre-Treatment[J]. International Journal of Adhesion and Adhesives, 2015, 63: 87-95.
[93] ZHANG C, CHEN L Y, ZHANG Y K, et al.Effect of Laser Processing Microstructure on the Bonding Strength and Failure Mode of 7075-T6 Aluminum Alloy Adhesive Joints[J]. Journal of Manufacturing Processes, 2021, 66: 302-312.
[94] ÖZGÜR BORA M, ÇOBAN O, AKMAN E, et al. Comparison of Novel Surface Treatments of Al2024 Alloy for Al/CFRP Adhesive Bonded Joints[J]. International Journal of Adhesion and Adhesives, 2020, 103: 102721.
[95] MA M L, WANG L M, LI J F, et al.Investigation of the Surface Integrity of Q345 Steel after Nd: YAG Laser Cleaning of Oxidized Mining Parts[J]. Coatings, 2020, 10(8): 716.
[96] 王霄, 王东生, 高雪松, 等. 轻合金构件激光增材制造研究现状及其发展[J]. 应用激光, 2016, 36(4): 478-483.
WANG X, WANG D S, GAO X S, et al.Research Status and Development in Laser Additive Manufacturing of Light Alloy Components[J]. Applied Laser, 2016, 36(4): 478-483.
[97] PARKES P N, BUTLER R, MEYER J, et al.Static Strength of Metal-Composite Joints with Penetrative Reinforcement[J]. Composite Structures, 2014, 118: 250-256.
[98] NGUYEN A T T, AMARASINGHE C K, BRANDT M, et al. Loading, Support and Geometry Effects for Pin- Reinforced Hybrid Metal-Composite Joints[J]. Composites Part A: Applied Science and Manufacturing, 2017, 98: 192-206.
[99] POPP J, KLEFFEL T, RÖMISCH D, et al. Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins[J]. Applied Composite Materials, 2021, 28(4): 951-972.
[100] NAGHDINASAB M, FARROKHABADI A, MADADI H.A Numerical Method to Evaluate the Material Properties Degradation in Composite RVEs Due to Fiber-Matrix Debonding and Induced Matrix Cracking[J]. Finite Elements in Analysis and Design, 2018, 146: 84-95.
[101] GRANDE E, MILANI G.Numerical Simulation of the Tensile Behavior of FRCM Strengthening Systems[J]. Composites Part B: Engineering, 2020, 189: 107886.
[102] HE P G, CHEN K, YANG J L.Surface Modifications of Ti Alloy with Tunable Hierarchical Structures and Chemistry for Improved Metal-Polymer Interface Used in Deepwater Composite Riser[J]. Applied Surface Science, 2015, 328: 614-622.
[103] 谌顺心, 徐任信. 铝合金表面活化及其与CF/PEEK复合材料电阻焊性能[J]. 航空材料学报, 2025, 45(3): 75-84.
CHEN S X, XU R X.Surface Activation of Aluminum Alloy on Its Resistance Welding Performance with CF/PEEK Composites[J]. Journal of Aeronautical Materials, 2025, 45(3): 75-84.
[104] HE H Y, XU J F, PEI K L, et al.Two-Step Strategy for Use in Improving the Multiscale Mechanical Performances of Fiber Metal Laminates: Applying Multi-Walled Carbon Nanotubes and Metal Surface Treatment[J]. Composites Part B: Engineering, 2025, 303: 112535.
PDF(18386 KB)

Accesses

Citation

Detail

Sections
Recommended

/

〈 〉