The work aims to explore the effect of aid techniques used during plasma carburizing on the microstructure and characteristics of 17CrNiMo6 steel. 17CrNiMo6 steel was subjected to plasma carburizing at 900 ℃ for 4 h with the assistance of hollow cathode discharge (HCD) and rare earth oxide (Y2O3 nanoparticles). The impact of three carburizing treatments, namely standard plasma carburizing (PC), HCD-enhanced PC, and a hybrid HCD-PC process with Y2O3 doping, on the carburized microstructure and properties of 17CrNiMo6 steel was comprehensively examined. A comparative analysis was conducted with various advanced tools, ranging from microstructural observation (OM, SEM, and EBSD) and surface topography to phase identification (XRD). These structural changes were further correlated with the material's hardness and reciprocating wear resistance. The microstructure of the carburized layers in all three groups of samples was composed of martensite, carbides, and retained austenite. HCD assistance significantly increased the carbon concentration in the carburized layer, resulting in higher contents of carbides and retained austenite. After the addition of yttrium element, the content of carbide and retained austenite, as well as their formation depth, were further increased. HCD and its combination with Y2O3 were capable of accelerating carbon atom diffusion and increasing the thickness of the effective hardened layer. The effective hardened layer thickness reached 1.9 mm for PC with HCD, 44% higher than conventional PC. With the addition of Y2O3, the thickness was 1.56 mm, an increase of 18%. HCD assistance enhanced the hardness of the carburized layer, reducing the wear rate from 2.34% for conventional PC to 1.59%. When HCD was combined with Y2O3, the near-surface hardness of the carburized zone was further improved, yielding a wear rate of only 0.26%. Serving as a localized and intensified abnormal glow discharge, the hollow cathode effect (HCE) generated a highly concentrated plasma region within the cathode cavity. Integrating this phenomenon into the plasma carburizing system significantly elevated the effective carbon potential, thereby accelerating the carburization kinetics. Furthermore, the HCD-Y2O3 composite strategy activated the unique catalytic properties of rare earth elements, creating a robust synergistic enhancement coupled with the high-energy physical bombardment of HCD. This synergy was fundamentally attributed to the distinct electronic configuration and exceptional chemical reactivity of yttrium (Y) atoms under high-temperature plasma conditions. The intense ion bombardment of HCD stimulated Y2O3 to release yttrium element, which infiltrated into the steel surface and exerted an active element effect. Since the atomic radius of yttrium was larger than that of iron, yttrium infiltration induced lattice distortion, which raised the surface energy of the steel and enhanced the driving force for capturing active carbon atoms. Lattice distortion also increased the defect density, reduced the infiltration barrier for carbon atoms, and thus increased the carbon diffusion flux. Therefore, the carbon concentration gradient in the carburized layer was further elevated, allowing the austenite to be preserved to room temperature in deeper regions. The lattice distortion in the vicinity of yttrium atoms also led to carbon atoms aggregation, forming micro-regions with high carbon concentration. This not only facilitated the intragranular diffusion of carbon but also promoted the nucleation and rapid growth of carbides. In this work, Y2O3 particles are used as the rare earth source. Within the localized high-density plasma field generated by the hollow cathode, yttrium exhibits an accelerated binding affinity towards active carbon species, thereby significantly amplifying the intrinsic catalytic efficiency of the rare-earth element. The HCD and HCD-Y2O3 composite assistance methods optimize the microstructure morphology of the carburized layer of 17CrNiMo6 steel by enhancing plasma activity and promoting carbon diffusion, thereby improving the hardness, effective hardened layer thickness and friction and wear properties of the carburized layer. This offers a feasible technical solution for the surface strengthening of high-load gears.
Key words
17CrNiMo6 steel /
plasma carburizing /
hollow cathode discharge /
Y2O3 particles /
carburized layer /
friction and wear
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] 刘忠明. 中国战略性新兴产业研究与发展-齿轮, Gear: 齿轮 Gear[M]. 北京: 机械工业出版社, 2013.
LIU Z M.R&D of China’s Strategic New Industries[M]. Beijing: China Machine Press, 2013.
[2] 陈玲, 魏沛堂, 刘怀举, 等. 齿轮接触疲劳微观结构作用研究综述[J]. 机械传动, 2022, 46(1): 1-18.
CHEN L, WEI P T, LIU H J, et al.Review on the Effect of Microstructure on Gear Contact Fatigue[J]. Journal of Mechanical Transmission, 2022, 46(1): 1-18.
[3] MIAO S, WANG J G, JU D Y, et al.Improvement and Analysis of Fatigue Strength for Mild Steel 20MnCrS5 during Carburizing and Quenching[J]. Materials Science, 2020, 26(2): 192-198.
[4] JO B, SHARIFIMEHR S, SHIM Y, et al.Cyclic Deformation and Fatigue Behavior of Carburized Automotive Gear Steel and Predictions Including Multiaxial Stress States[J]. International Journal of Fatigue, 2017, 100: 454-465.
[5] WANG C Y, CHANG Y, LI X D, et al.Relation of Martensite-Retained Austenite and Its Effect on Microstructure and Mechanical Properties of the Quenched and Partitioned Steels[J]. Science China Technological Sciences, 2016, 59(5): 832-838.
[6] ZHANG K, ZHANG M H, GUO Z H, et al.A New Effect of Retained Austenite on Ductility Enhancement in High- Strength Quenching-Partitioning-Tempering Martensitic Steel[J]. Materials Science and Engineering: A, 2011, 528(29/30): 8486-8491.
[7] PANG Z R, YU S J, XU J W.Study of Effect of Quenching Deformation Influenced by 17CrNiMo6 Gear Shaft of Carburization[J]. Physics Procedia, 2013, 50: 103-112.
[8] SHI L, CUI X F, LI J, et al.Improving the Wear Resistance of Heavy-Duty Gear Steels by Cyclic Carburizing[J]. Tribology International, 2022, 171: 107576.
[9] 韩春阳, 胡寒婷, 张沛, 等. Nb微合金化17CrNiMo6钢齿轮轴的高温渗碳工艺[J]. 金属热处理, 2024, 49(11): 267-272.
HAN C Y, HU H T, ZHANG P, et al.High Temperature Carburizing Process of Nb Microalloyed 17CrNiMo6 Steel Gear Shaft[J]. Heat Treatment of Metals, 2024, 49(11): 267-272.
[10] YEROKHIN A L, NIE X, LEYLAND A, et al.Plasma Electrolysis for Surface Engineering[J]. Surface and Coatings Technology, 1999, 122(2/3): 73-93.
[11] DONG Z H, ZHANG W, KANG H W, et al.Surface Hardening of Laser Melting Deposited 12CrNi2 Alloy Steel by Enhanced Plasma Carburizing via Hollow Cathode Discharge[J]. Surface and Coatings Technology, 2020, 397: 125976.
[12] LIU H Y, CHE H L, LI G B, et al.Low-Pressure Hollow Cathode Plasma Source Carburizing Technique at Low Temperature[J]. Surface and Coatings Technology, 2021, 422: 127511.
[13] ZHANG Z H, WANG Z W, SHAO M H, et al.Nitrogen-Carbon-Induced Spinodal Structure in Plasma Nitrocarburized 38CrMoAl with Hollow Cathode Discharging[J]. Journal of Materials Science, 2024, 59(28): 13305-13322.
[14] DONG M L, CUI X F, ZHANG Y H, et al.Vacuum Carburization of 12Cr2Ni4A Low Carbon Alloy Steel with Lanthanum and Cerium Ion Implantation[J]. Journal of Rare Earths, 2017, 35(11): 1164-1170.
[15] KOLOBOV V I, METEL A S.Glow Discharges with Electrostatic Confinement of Fast Electrons[J]. Journal of Physics D: Applied Physics, 2015, 48(23): 233001.
[16] BARÁNKOVÁ H, BÁRDOŠ L, BERG S. The Radio Frequency Hollow Cathode Plasma Jet Arc for the Film Deposition[J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1996, 14(6): 3033-3038.
[17] MUHL S, PÉREZ A. The Use of Hollow Cathodes in Deposition Processes: A Critical Review[J]. Thin Solid Films, 2015, 579: 174-198.
[18] LI B Z, LI C S, LI Z X, et al.Microstructure and Mechanical Properties of Fe-Cr-2Ni-Mo-V Steel in Carburizing Process[J]. Procedia Manufacturing, 2018, 15: 1612-1618.
[19] HOSSAIN R, PAHLEVANI F, QUADIR M Z, et al.Stability of Retained Austenite in High Carbon Steel under Compressive Stress: An Investigation from Macro to Nano Scale[J]. Scientific Reports, 2016, 6: 34958.
[20] SHEN Y F, DONG X X, SONG X T, et al.Carbon Content-Tuned Martensite Transformation in Low-Alloy TRIP Steels[J]. Scientific Reports, 2019, 9: 7559.
[21] DONG Z H, CHEN S N, BAO Z B.Enhanced Plasma Nitriding Assisted by Combining Hollow Cathode Discharge with Rare Earth Oxide Particles for Iron-Based Metals[J]. Vacuum, 2024, 221: 112935.
[22] DONG M L, CUI X F, LU B W, et al.Accelerated Diffusion of Carbon and Grain Refinement of Vacuum Carburized Layer by La Ion Implantation[J]. Journal of Alloys and Compounds, 2020, 814: 152308.
[23] 刘志儒, 朱法义, 崔约贤, 等. 稀土低温高浓度渗碳表面渗层的微观组织[J]. 中国稀土学报, 1993, 11(3): 247-251.
LIU Z R, ZHU F Y, CUI Y X, et al.Microstructure of Surface Carburized Layer of Rare Earth at Low Temperature and High Concentration[J]. Journal of the Chinese Rare Earth Society, 1993, 11(3): 247-251.
[24] 刘志儒, 朱法义, 蔡成红, 等. 稀土低温高浓度气体渗碳工艺及其在20Cr2Ni4A钢上的应用[J]. 金属热处理, 1994, 19(11): 15-19.
LIU Z R, ZHU F Y, CAI C H, et al.High Carbon Concentration Carburizing Process at Low Temperature with Rare Earth Element and Its Application to Steel 20Cr2Ni4A[J]. Heat Treatment of Metals, 1994, 19(11): 15-19.
[25] LIU Z R, ZHU F Y, CUI Y X, et al.Microstructure of Surface Layer Formed at Low Temperature and High Carbon Concentration Carburizing with Rare Earth Element[J]. Journal of Rare Earths, 2006, 24(3): 363-367.
[26] HAGER C H, EVANS R D.Friction and Wear Properties of Black Oxide Surfaces in Rolling/Sliding Contacts[J]. Wear, 2015, 338: 221-231.
[27] ARUN PRAKASH N, BENNETT C J.The Effect of Plasma Nitriding and Post Oxidation on Fretting Wear Behaviour of a High Strength Alloy Steel[J]. Journal of Physics: Conference Series, 2017, 843: 012079.
[28] ABEDI H R, SALEHI M, YAZDKHASTI M.Novel Plasma Nitriding-Oxidizing Duplex Treatment of AISI 316 Austenitic Stainless Steel[J]. Materials Letters, 2010, 64(6): 698-701.
[29] SO H.The Mechanism of Oxidational Wear[J]. Wear, 1995, 184(2): 161-167.
[30] CONTE M, PINEDO B, IGARTUA A.Frictional Heating Calculation Based on Tailored Experimental Measurements[J]. Tribology International, 2014, 74: 1-6.
Funding
Science and Technology Planning Project of Liaoning Province of China (2023JH1/10400052)