Surface Modification of Modified Nickel Slag and Its Application in Magnetic Composite Fluid Polishing

WANG Youliang, XU Qingkai, YU Puyao, ZHANG Wenjuan, YIN Xincheng

Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 110-124.

PDF(26033 KB)
PDF(26033 KB)
Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 110-124. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.010
Precision and Ultra-precision Machining

Surface Modification of Modified Nickel Slag and Its Application in Magnetic Composite Fluid Polishing

  • WANG Youlianga,b, XU Qingkaia,b, YU Puyaoa,b, ZHANG Wenjuanc,*, YIN Xinchenga,b
Author information +
History +

Abstract

This study designed and prepared a modified slag @SiO2 composite abrasive particle with a core-shell structure. According to the melt gel method, and with tetraethyl orthosilicate as the silicon source, hydrolysis condensation reaction was carried out on the surface of the modified slag obtained by magnetic separation to achieve a SiO2 shell coating. The average size of the prepared abrasive particles was 7 μm, the shell was dense and uniform, and had good dispersibility. The prepared core-shell abrasive particles were applied to magnetic composite fluid (MCF) and then used to polish polymethyl methacrylate (PMMA). The morphology characteristics of the polished workpiece were observed to verify its feasibility in MCF polishing slurry. By coating a SiO2 layer on the modified slag surface, modified slag@SiO2 core-shell structured abrasive particles were obtained, and the surface morphology of modified slag@SiO2 was observed by scanning electron microscopy (SEM); The surface elemental composition was observed with an energy dispersive spectrometer (EDS); X-ray diffraction (XRD) analysis of its phase changes was conducted; Its surface functional groups were analyzed through Fourier transform infrared spectroscopy (FT-IR); Vibration sample magnetometer (VSM) analysis of its magnetic properties was conducted; High speed camera was used to capture changes in its contact angle; An industrial camera was applied to observe the surface morphology of MCF polishing slurry before and after polishing under the influence of an external magnetic field. The contact angle size of MCF polishing slurry with added modified slag and modified slag@SiO2 was tested, and the effect of modified slag@SiO2 on the formation of magnetic clusters was analyzed based on the contact angle size. The surface morphology characteristics of PMMA before and after polishing with modified slag@SiO2 MCF polishing slurry containing different mass fractions were observed. The material removal profile was detected. Matlab simulation software was used to analyze its material removal volume and material removal rate, and the influence of modified slag@SiO2 content on the roughness and material removal rate was analyzed. A triaxial force gauge was used to measure the magnitude of positive and shear forces, and analyze their impact on the material removal. The experimental results showed that the initial contact angle of modified slag was 63.43°, and the initial contact angle of modified slag@SiO2 was 17.12°. Compared with modified slag, the initial contact angle decreased and the hydrophilicity significantly increased. When applied in MCF polishing slurry, the initial contact angle of MCF polishing slurry was 49.76° and decreased to 14.74° after 0.89 s, indicating that the hydrophilicity of MCF polishing slurry was effectively improved. By analyzing the surface morphology of the polishing slurry before and after polishing, hydrophilicity can effectively improve the distribution of magnetic clusters. Modified slag@SiO2 has excellent polishing performance on PMMA materials, obtaining workpieces with smooth surfaces and high material removal rates. By changing the mass fraction of modified slag@SiO2 and polishing parameters, the optimal material removal rate (27.585×108 μm3/min) and lower roughness (0.004 μm) are achieved. The core-shell structured abrasive particles modified by SiO2 coating significantly enhance the hydrophilicity and interfacial wettability of MCF polishing slurry, effectively improve the surface roughness of the workpiece, and suppress the loss of magnetic fluid during the polishing process, further optimizing the MCF polishing performance.

Key words

modified nickel slag / magnetic composite fluid / material removal rate / surface roughness / polishing

Cite this article

Download Citations
WANG Youliang, XU Qingkai, YU Puyao, ZHANG Wenjuan, YIN Xincheng. Surface Modification of Modified Nickel Slag and Its Application in Magnetic Composite Fluid Polishing[J]. Surface Technology. 2026, 55(21): 110-124

References

[1] 李小明, 沈苗, 王翀, 等. 镍渣资源化利用现状及发展趋势分析[J]. 材料导报, 2017, 31(5): 100-105.
LI X M, SHEN M, WANG C, et al.Current Situation and Development of Comprehensive Utilization of Nickel Slag[J]. Materials Review, 2017, 31(5): 100-105.
[2] JIANG H S, ZHANG J, HUANG B, et al.Preparation and Properties of Nickel-Iron Slag-Based Magnesium Chloride Cement[J]. Case Studies in Construction Materials, 2024, 21: e03533.
[3] WANG J Z, KANG S X, ZHANG D L, et al.Study of Thermal Resistance and Regulation Mechanisms in Nickel Slag-Slag Based Binary Geopolymers[J]. Case Studies in Construction Materials, 2025, 22: e04779.
[4] HE Y, CHEN Q S, KANG Q, et al.Effect of Enhanced Pozzolanic Activity in Nickel Slag Modified with Al2O3 on Mechanical Properties of Cemented Fine Tailings Backfill[J]. Construction and Building Materials, 2024, 411: 134610.
[5] LI B T, LIU Z R, SUN Q, et al.Preparation of Alkali- Activated Nickel Slag-Based Cemented Tailings Backfill: Workability, Strength Characteristics, Localized Deformation and Hydration Mechanism[J]. Construction and Building Materials, 2024, 411: 134639.
[6] 陈卫东, 陈艳丽, 王崇国. 泡沫镍的电沉积法制备研究进展[J]. 世界有色金属, 2019(17): 170-171.
CHEN W D, CHEN Y L, WANG C G.Application of Foam Nickel in Fuel Cell Cathode Materials in China[J]. World Nonferrous Metals, 2019(17): 170-171.
[7] LI B, RONG T L, DU X Y, et al.Preparation of Fe3O4 Particles with Unique Structures from Nickel Slag for Enhancing Microwave Absorption Properties[J]. Ceramics International, 2021, 47(13): 18848-18857.
[8] 李彬, 杜雪岩, 申莹莹. 熔融氧化镍渣连续冷却过程磁铁矿晶体析出长大行为[J]. 稀有金属材料与工程, 2022, 51(5): 1821-1827.
LI B, DU X Y, SHEN Y Y.Precipitation and Growth Behavior of Magnetite Crystal during Continuous Cooling of Molten Nickel Oxide Slag[J]. Rare Metal Materials and Engineering, 2022, 51(5): 1821-1827.
[9] SUZUKI H, OKADA M, LIN W, et al.Fine Finishing of Ground DOE Lens of Synthetic Silica by Magnetic Field- Assisted Polishing[J]. CIRP Annals, 2014, 63(1): 313-316.
[10] XU J H, LI J Y, ZHU P Z, et al.Coarse-Grained Molecular Dynamics Simulations of Particle Behaviors in Magnetorheological Polishing Fluid[J]. Computational Materials Science, 2019, 163: 68-81.
[11] GUO J, QIN P, LI Q K, et al.A New Magnetic Enhanced Chemical Mechanical Polishing Method for Quartz Glass Slender Holes[J]. Journal of Materials Processing Technology, 2024, 327: 118361.
[12] LONG J L, KAMIMURA T, MARUI H, et al.Iron- Particle-Polishing-Tool Behavior during Magnetic Field- Assisted Finishing of Fused Silica[J]. CIRP Journal of Manufacturing Science and Technology, 2022, 38: 675-683.
[13] GAO R, LOH Y M, LI K S, et al.Study on the Material Removal Mechanism of Cemented Carbide Magnetic Materials in Magnetic Field-Assisted Mass Polishing[J]. Tribology International, 2025, 208: 110647.
[14] ZHANG X, FAN Z H, YANG Z H, et al.Experimental Investigations on Chemical-Assisted Magnetorheological Shear Thickening Polishing for Zirconia Ceramics Tubes[J]. Journal of Magnetism and Magnetic Materials, 2025, 629: 173264.
[15] LOH Y M, GAO R, CHEUNG C F, et al.A Novel Magnetic Field Assisted Automatic Batch Polishing Method for Dental Ceramic Crowns[J]. Ceramics International, 2023, 49(16): 26540-26547.
[16] FAN Z H, YANG Z H, ZHANG X, et al.Material Removal Behavior and Surface Evolution in Chemical- Enhanced Magnetorheological Shear Thickening Polishing of Titanium Alloy Slender Tubes[J]. Tribology International, 2026, 218: 111667.
[17] LI J Y, FAN Z H, YANG Z H, et al.Simulation and Modeling of Magnetorheological Shear Thickening Polishing Processes for Slender Tube[J]. Journal of Materials Research and Technology, 2023, 25: 480-496.
[18] YAMAGUCHI H, HASHIMOTO F, DA SILVA E, et al.Advances in Magnetic Field-Assisted Finishing[J]. CIRP Annals, 2025, 74(2): 921-944.
[19] AHMAD S, TIAN Y B, ARORA K.Magnetic Abrasive Finishing: Innovations and Possibilities[J]. Journal of Manufacturing Processes, 2025, 134: 299-336.
[20] TANI Y, KAWATA K, NAKAYAMA K.Development of High-Efficient Fine Finishing Process Using Magnetic Fluid[J]. CIRP Annals, 1984, 33(1): 217-220.
[21] UMEHARA N, HAYASHI T, KATO K.In Situ Observation of the Behavior of Abrasives in Magnetic Fluid Grinding[J]. Journal of Magnetism and Magnetic Materials, 1995, 149(1/2): 181-184.
[22] TIEN D H, THOA P T T, VAN QUE N, et al. Developing Material Removal Rate from Polishing Force Modeling via Magnetorheological Finishing Using an Improved Halbach Array with a Slider Crank Mechanism for Ti-6Al-4V Alloy[J]. Materials Today Communications, 2025, 45: 112360.
[23] XIE M L, MA Z T, YANG X C, et al.Investigation into the Rheological Properties of Carbonyl Iron Powder with a Fluffy Surface Structure and Its Effects on Magnetorheological Polishing[J]. Journal of Manufacturing Processes, 2025, 150: 516-530.
[24] ZHAI Q, ZHAI W J, GAO B, et al.Synthesis and Characterization of Nanocomposite Fe3O4/SiO2 Core- Shell Abrasives for High-Efficiency Ultrasound-Assisted Magneto-Rheological Polishing of Sapphire[J]. Ceramics International, 2021, 47(22): 31681-31690.
[25] YANG Y K, LU M M, LIN J Q, et al.Free Abrasive Assisted Magnetorheological Polishing: Device Design and Processing Performance Analysis[J]. CIRP Journal of Manufacturing Science and Technology, 2025, 63: 214-226.
[26] SHIMADA K, AKAGAMI Y, KAMIYAMA S, et al.New Microscopic Polishing with Magnetic Compound Fluid (MCF)[J]. Journal of Intelligent Material Systems and Structures, 2002, 13(7/8): 405-408.
[27] FURUYA T, WU Y, NOMURA M, et al.Fundamental Performance of Magnetic Compound Fluid Polishing Liquid in Contact-Free Polishing of Metal Surface[J]. Journal of Materials Processing Technology, 2008, 201(1/2/3): 536-541.
[28] FENG M, WU Y B, WANG Y L, et al.Investigation on the Polishing of Aspheric Surfaces with a Doughnut- Shaped Magnetic Compound Fluid (MCF) Tool Using an Industrial Robot[J]. Precision Engineering, 2020, 61: 182-193.
[29] 叶卉, 李壮, 王健, 等. 熔石英元件磁性复合流体抛光去除特性研究[J]. 红外与激光工程, 2024, 53(7): 20240139.
YE H, LI Z, WANG J, et al.Characterization of Magnetic Composite Fluid Polishing Removal of Fused Silica Elements[J]. Infrared and Laser Engineering, 2024, 53(7): 20240139.
[30] 张泽林, 周宏明, 冯铭, 等. 磁性复合流体抛光氧化锆陶瓷的工艺优化[J]. 金刚石与磨料磨具工程, 2023, 43(6): 712-719.
ZHANG Z L, ZHOU H M, FENG M, et al.Process Parameters Optimization of Zirconia Ceramics Polishing with Magnetic Compound Fluid Slurry[J]. Diamond & Abrasives Engineering, 2023, 43(6): 712-719.
[31] 王有良, 梁博, 张文娟. 磁性复合流体对砷化镓晶片的超精密表面抛光[J]. 稀有金属材料与工程, 2024, 53(2): 377-385.
WANG Y L, LIANG B, ZHANG W J.Ultra-Precision Surface Polishing of Gallium Arsenide Wafer Using Magnetic Compound Fluid Slurry[J]. Rare Metal Materials and Engineering, 2024, 53(2): 377-385.
[32] 李佳音, 姜晨, 王璐璐, 等. 十二烷基苯磺酸钠对磁性复合流体分散性及抛光质量的影响[J]. 表面技术, 2021, 50(8): 389-395.
LI J Y, JIANG C, WANG L L, et al.Effect of Sodium Dodecyl Benzene Sulfonate on Dispersion and Polishing Quality of Magnetic Compound Fluid[J]. Surface Technology, 2021, 50(8): 389-395.
[33] 姜晨, 洪小兰, 时培兵, 等. 六偏磷酸钠对磁性复合流体分散性及光学玻璃抛光性能的影响[J]. 稀土, 2020, 41(2): 47-55.
JIANG C, HONG X L, SHI P B, et al.Effect of Sodium Hexametaphosphate on the Dispersion of Magnetic Compound Fluid and Its Polishing Performance for Optical Glass[J]. Chinese Rare Earths, 2020, 41(2): 47-55.
[34] 王有良, 于璞垚, 尹新城, 等. 镍渣改质及其在磁性复合流体抛光中的应用[J]. 光学精密工程, 2025, 33(1): 84-95.
WANG Y L, YU P Y, YIN X C, et al.Modification of Nickel Slag and Application in Magnetic Compound Fluid Polishing[J]. Optics and Precision Engineering, 2025, 33(1): 84-95.
[35] 喻溪亭, 缑晓丹, 张延宗. 超亲水-水下超疏油镍镀层材料制备及其油水分离性能研究[J]. 表面技术, 2021, 50(6): 177-183.
YU X T, GOU X D, ZHANG Y Z.Preparation of Superhydrophilic and Underwater Superoleophobic Nickel- Coating Material and Oil-Water Separation Performance[J]. Surface Technology, 2021, 50(6): 177-183.
[36] 杨淑燕, 郭峰, 马冲, 等. 固液润湿性对流体动压润滑薄膜的影响[J]. 摩擦学学报, 2010, 30(2): 203-208.
YANG S Y, GUO F, MA C, et al.Influences of the Liquid/Solid Wettability on Thin Hydrodynamic Lubrication Films[J]. Tribology, 2010, 30(2): 203-208.
[37] GALINDO-ROSALES F J, RUBIO-HERNÁNDEZ F J, SEVILLA A. An Apparent Viscosity Function for Shear Thickening Fluids[J]. Journal of Non-Newtonian Fluid Mechanics, 2011, 166(5/6): 321-325.
[38] ZHU W L, BEAUCAMP A.Non-Newtonian Fluid Based Contactless Sub-Aperture Polishing[J]. CIRP Annals, 2020, 69(1): 293-296.
[39] DAS S K, GAUTAM S S.A Comprehensive Isogeometric Analysis of Frictional Hertz Contact Problem[J]. Tribology International, 2024, 200: 110078.

Funding

National Natural Science Foundation of China (52265056, 52262013); Natural Science Foundation of Gansu Province (23JRRA776); Lanzhou Youth Talent Project (2023-QN-38)
PDF(26033 KB)

Accesses

Citation

Detail

Sections
Recommended

/

〈 〉