Effect of Sintering Atmosphere on the Structure and Performance of Metal-supported SOFC Anodes

LIU Xingyan, SONG Chen, ZENG Dechang, LIU Min, LIU Taikai, WEN Kui

Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 1-11.

PDF(18989 KB)
PDF(18989 KB)
Surface Technology ›› 2026, Vol. 55 ›› Issue (21) : 1-11. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.001
Surface and Interface Technology of Functional Components for Energy Equipment

Effect of Sintering Atmosphere on the Structure and Performance of Metal-supported SOFC Anodes

  • LIU Xingyan1,2, SONG Chen2,*, ZENG Dechang1,*, LIU Min2, LIU Taikai2, WEN Kui2
Author information +
History +

Abstract

The work aims to elucidate the regulation mechanism of sintering atmosphere on anode microstructure and mechanical stability, and to reveal its key role in improving plasma-sprayed electrolyte film quality and cell performance of metal-supported solid oxide fuel cells (MS-SOFCs). NiO-YSZ anode functional layers were screen-printed on porous 430L stainless steel substrates and sintered at 1 200 ℃ for 2 h under hydrogen or vacuum atmosphere. ScSZ electrolytes and LSCF cathodes were sequentially deposited by atmospheric plasma spraying (APS) under identical parameters. The effects of sintering atmosphere on phase evolution, microstructure, elemental diffusion, mechanical properties and electrochemical performance were systematically investigated. XRD confirmed complete reduction of NiO to metallic Ni under both atmospheres. In hydrogen atmosphere, NiO reduction occurred readily, while in vacuum, reduction was attributed to low oxygen partial pressure (approaching 10-2 Pa) and carbothermal reactions from residual organics. Hydrogen-sintered anodes exhibited significant Ni coarsening (1.0-2.2 μm) via Ostwald ripening, forming a dense and well-connected structure with nanohardness of 3.88 GPa and elastic modulus of 82 GPa. Gas permeability measurements showed a leakage rate of 3.7×10-6 cm4·gf-1·s-1. Vacuum-sintered anodes retained finer Ni particles (<1.3 μm) with a porous structure and higher gas leakage rate of 4.7×10-6 cm4·gf-1·s-1, but exhibited inferior mechanical properties (1.84 GPa, 45 GPa). EDS line scans revealed pronounced Fe and Cr diffusion in hydrogen-sintered samples (10 μm for Fe, 13 μm for Cr), attributed to disruption of the protective Cr2O3 layer under reducing atmosphere and alloying reactions at the interface. Vacuum-sintered samples showed significantly suppressed interdiffusion (7 μm for Fe, 5 μm for Cr) due to stable surface state of the metal support. The mechanical weakness of vacuum-sintered anodes led to horizontal cracking within the anode layer during APS electrolyte deposition, which propagated into the electrolyte inducing vertical cracks and compromising cell integrity. Hydrogen-sintered anodes maintained structural integrity, enabling crack-free electrolyte deposition. Electrochemical testing from 600 to 750 ℃ revealed that the hydrogen-sintered cell (Cell-H2) achieved superior open-circuit voltage of 1.04 V at 700 ℃ compared to 0.956 V for the vacuum-sintered cell (Cell-Vac). Maximum power densities at 700 ℃ were 418 mW·cm-2 for Cell-H2 and 453 mW·cm-2 for Cell-Vac. EIS analysis showed lower resistances for Cell-Vac, attributed to local heating from fuel leakage through electrolyte cracks artificially enhancing ionic conductivity of temperature-sensitive ScSZ electrolyte. This "apparent performance enhancement" occurs at the expense of fuel utilization and long-term reliability. Comparison with literature confirms Cell-H2 achieves competitive OCV but requires further electrolyte densification to improve power density toward state-of-the-art values (~750 mW·cm-2). Hydrogen sintering produces anodes with superior mechanical robustness, enabling crack-free APS electrolyte deposition and yielding cells with high OCV and sustainable performance. Vacuum sintering suppresses elemental diffusion but yields mechanically weak anodes prone to failure. The apparent power advantage of defect-containing cells originates from local heating due to fuel leakage, highlighting the critical importance of structural integrity over transient performance metrics for practical applications.

Key words

metal-supported solid oxide fuel cell / sintering atmosphere / anode / atmospheric plasma spraying / microstructure / electrochemical performance

Cite this article

Download Citations
LIU Xingyan, SONG Chen, ZENG Dechang, LIU Min, LIU Taikai, WEN Kui. Effect of Sintering Atmosphere on the Structure and Performance of Metal-supported SOFC Anodes[J]. Surface Technology. 2026, 55(21): 1-11

References

[1] 熊少强, 杨润农, 林梓荣.“双碳”背景下固体氧化物燃料电池技术研究进展[J]. 石油与天然气化工, 2025, 54(6): 67-76.
XIONG S Q, YANG R N, LIN Z R.Research Progress of Solid Oxide Fuel Cell Technology in the Context of Dual Carbon Goals[J]. Chemical Engineering of Oil & Gas, 2025, 54(6): 67-76.
[2] 黄震, 谢晓敏, 张庭婷.“双碳”背景下我国中长期能源需求预测与转型路径研究[J]. 中国工程科学, 2022, 24(6): 8-18.
HUANG Z, XIE X M, ZHANG T T.Medium-and Long-Term Energy Demand of China and Energy Transition Pathway Toward Carbon Neutrality[J]. Strategic Study of CAE, 2022, 24(6): 8-18.
[3] GOU Y J, LI G D, REN R Z, et al.Pr-Doping Motivating the Phase Transformation of the BaFeO3-δ Perovskite as a High-Performance Solid Oxide Fuel Cell Cathode[J]. ACS Applied Materials & Interfaces, 2021, 13(17): 20174-20184.
[4] ANTUNES F C, DE OLIVEIRA J P J, DE ABREU R S, et al. Reviewing Metal Supported Solid Oxide Fuel Cells for Efficient Electricity Generation with Biofuels for Mobility[J]. Journal of Energy Chemistry, 2025, 103: 106-153.
[5] 高圆, 李智, 李甲鸿, 等. 金属支撑固体氧化物燃料电池技术进展[J]. 综合智慧能源, 2022, 44(8): 1-24.
GAO Y, LI Z, LI J H, et al.Progress in Technologies of Metal-Supported Solid Oxide Fuel Cells[J]. Integrated Intelligent Energy, 2022, 44(8): 1-24.
[6] DE OLIVEIRA J P J, ANTUNES F C, DIAS T, et al. Porous Metal Substrates for Solid Oxide Fuel Cells: Manufacturing Techniques and Future Perspectives[J]. Ceramics International, 2025, 51(9): 10951-10972.
[7] WAGHMARE A M, GAIKAR P S, CUI C L, et al.A Review of Developments and Challenges in Advanced Anode Materials for Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2026, 663: 238853.
[8] LIN J, LI H X, WANG W H, et al.Atmospheric Plasma Spraying to Fabricate Metal-Supported Solid Oxide Fuel Cells with Open-Channel Porous Metal Support[J]. Journal of the American Ceramic Society, 2023, 106(1): 68-78.
[9] HWANG C S, TSAI C H, HWANG T J, et al.Novel Metal Substrates for High Power Metal-Supported Solid Oxide Fuel Cells[J]. Fuel Cells, 2016, 16(2): 244-251.
[10] YANG Y C, CHANG T H, WU Y C, et al.Porous Ni/8YSZ Anode of SOFC Fabricated by the Plasma Sprayed Method[J]. International Journal of Hydrogen Energy, 2012, 37(18): 13746-13754.
[11] 邓春明, 肖娟, 曹家旭, 等. 等离子喷涂-物理气相沉积稀土高温功能涂层研究进展[J]. 材料研究与应用, 2019, 13(3): 247-251.
DENG C M, XIAO J, CAO J X, et al.Research Progress of PS-PVD Rare Earth High Temperature Functional Coatings[J]. Materials Research and Application, 2019, 13(3): 247-251.
[12] 朱志刚, 宋琛, 胡永俊, 等. 粉末粒径对等离子喷涂固体氧化物燃料电池阳极微观结构及性能的影响[J]. 材料研究与应用, 2023, 17(2): 329-337.
ZHU Z G, SONG C, HU Y J, et al.Effect of Powder Particle Size on Anode Microstructure and Performance for Plasma-Sprayed Solid Oxide Fuel Cell[J]. Materials Research and Application, 2023, 17(2): 329-337.
[13] GUO Y, SONG C, LIU T K, et al.Effect of Plasma Sprayed Anode Surface Structure on Metal-Supported SOFC Performance[J]. Ceramics International, 2025, 51(6): 7495-7501.
[14] THALER F, UDOMSILP D, SCHAFBAUER W, et al.Redox Stability of Metal-Supported Fuel Cells with Nickel/Gadolinium-Doped Ceria Anode[J]. Journal of Power Sources, 2019, 434: 226751.
[15] HAYDN M, ORTNER K, FRANCO T, et al.Multi-Layer Thin-Film Electrolytes for Metal Supported Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2014, 256: 52-60.
[16] KUHN J, GUPTA M, KESLER O, et al.The Effect of Fuel Electrode Roughness on the Properties of Plasma Sprayed Solid Oxide Cells[J]. Journal of the Electrochemical Society, 2018, 165(9): F693-F701.
[17] MEHRAN M T, KHAN M Z, SONG R H, et al.A Comprehensive Review on Durability Improvement of Solid Oxide Fuel Cells for Commercial Stationary Power Generation Systems[J]. Applied Energy, 2023, 352: 121864.
[18] JEANGROS Q, AEBERSOLD A B, HÉBERT C, et al. A TEM Study of Ni Interfaces Formed during Activation of SOFC Anodes in H2: Influence of Grain Boundary Symmetry and Segregation of Impurities[J]. Acta Materialia, 2016, 103: 442-447.
[19] BRANDNER M, BRAM M, FROITZHEIM J, et al.Electrically Conductive Diffusion Barrier Layers for Metal-Supported SOFC[J]. Solid State Ionics, 2008, 179(27/28/29/30/31/32): 1501-1504.
[20] TOMOV R I, KRAUZ M, TLUCZEK A, et al.Vacuum-Sintered Stainless Steel Porous Supports for Inkjet Printing of Functional SOFC Coatings[J]. Materials for Renewable and Sustainable Energy, 2015, 4(3): 14.
[21] 李冬云, 乔冠军, 金志浩. 流延法制备陶瓷薄片的研究进展[J]. 硅酸盐通报, 2004, 23(2): 44-47.
LI D Y, QIAO G J, JIN Z H.Research Development of Ceramic Slice by Tape - Casting Technique[J]. Bulletin of the Chinese Ceramic Society, 2004, 23(2): 44-47.
[22] KIM Y J, JUNG W N, YU J H, et al.Design and Analysis of SOFC Stack with Different Types of External Manifolds[J]. International Journal of Hydrogen Energy, 2020, 45(53): 29143-29154.
[23] BRANDNER M.Inhibition of Diffusion between Metallic Substratesand Ni-YSZ Anodes during Sintering[J]. ECS Proceedings Volumes, 2005, (1): 1235-1243.
[24] PIHLATIE M, KAISER A, MOGENSEN M.Mechanical Properties of NiO/Ni-YSZ Composites Depending on Temperature, Porosity and Redox Cycling[J]. Journal of the European Ceramic Society, 2009, 29(9): 1657-1664.
[25] MORALES M, ROA J J, CAPDEVILA X G, et al.Mechanical Properties at the Nanometer Scale of GDC and YSZ Used as Electrolytes for Solid Oxide Fuel Cells[J]. Acta Materialia, 2010, 58(7): 2504-2509.
[26] GARCÍA-GONZÁLEZ S, JIMÉNEZ-PIQUÉ E, ORTIZ- MEMBRADO L, et al. Mechanical and Microstructural Evolution of Ni-YSZ Electrodes in Solid Oxide Cells after Long-Term Operation: Insights from High-Speed Nanoindentation Mapping and Gaussian Mixture Model Clustering[J]. Fuel, 2026, 413: 138158.
[27] CHIODELLI G, MALAVASI L.Electrochemical Open Circuit Voltage (OCV) Characterization of SOFC Materials[J]. Ionics, 2013, 19(8): 1135-1144.
[28] SONG C, XIE S M, FAN X J, et al.Very Low-Pressure Plasma-Sprayed Dense Yttria-Stabilized Zirconia Coatings Using an Axial Bi-Cathode Plasma Torch[J]. Surface and Coatings Technology, 2020, 402: 126281.
[29] GUO Y, SONG C, LIU M, et al.Development of NiO-GDC Anode by Atmospheric Plasma Spraying for Metal-Supported SOFCs[J]. Journal of Thermal Spray Technology, 2025, 34(1): 291-299.
[30] DU K, SONG C, YUAN B, et al.Plasma-Sprayed Dense Yttria-Stabilized Zirconia Electrolyte for Metal-Supported Solid Oxide Fuel Cells[J]. Ceramics International, 2025, 51(7): 9412-9420.
[31] DU K, SONG C, YUAN B, et al.Degradation Analysis of Plasma Sprayed Metal-Supported Solid Oxide Fuel Cell: The Evolution of Electrode Processes under Polarization[J]. Journal of Power Sources, 2024, 621: 235298.
[32] ROJEK-WÖCKNER V A, OPITZ A K, BRANDNER M, et al. A Novel Ni/Ceria-Based Anode for Metal-Supported Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2016, 328: 65-74.
[33] PENG Y K, SONG C, LIU M, et al.Preparation of Ni-GDC Anode for Metal-Supported Solid Oxide Fuel Cells via Suspension Plasma Spraying[J]. Ceramics International, 2026, 52(3): 3481-3490.
[34] METCALFE C, HARRIS J, KUHN J, et al.Progress in Metal-Supported Axial-Injection Plasma Sprayed Solid Oxide Fuel Cells Using Nanostructured NiO-Y0.15Zr0.85O1.925 Dry Powder Anode Feedstock[J]. Journal of Thermal Spray Technology, 2013, 22(5): 599-608.
[35] 富涛, 高九涛, 高圆, 等. 阳极微结构对等离子喷涂金属支撑SOFC的电池性能的影响研究[J]. 热喷涂技术, 2022, 14(1): 28-37.
FU T, GAO J T, GAO Y, et al.Effect of Anode Microstructure on Plasma-Sprayed Metal Supported SOFC Performance[J]. Thermal Spray Technology, 2022, 14(1): 28-37.

Funding

National Key R&D Program of China (2023YFE0108000); Guangdong Province Science and Technology Plan Projects (2023B1212060045, 2023B1212120008); Young Talent Project of GDAS (2024GDASQNRC-0208); GDAS' Project of Science and Technology Development (2024GDASZH-2024010102); GINM's Special Project of Science and Technology Development (2023GINMZX-202301020104); Guangzhou Basic and Applied Basic Research Project (2025A04J5111)
PDF(18989 KB)

Accesses

Citation

Detail

Sections
Recommended

/

〈 〉