荧光粉表面包覆膜制备方法及其功能的研究进展

郭萍, 朱宪忠, 张彦娜, 曾明敏

表面技术 ›› 2013, Vol. 42 ›› Issue (4) : 100-103,118.

PDF(3654 KB)
PDF(3654 KB)
表面技术 ›› 2013, Vol. 42 ›› Issue (4) : 100-103,118.

荧光粉表面包覆膜制备方法及其功能的研究进展

  • 郭萍, 朱宪忠, 张彦娜, 曾明敏
作者信息 +

Progress of Fabrication and Function of Surface Coating of Fluorescent Powders

  • GUO Ping, ZHU Xian-zhong, ZHANG Yan-na, ZENG Ming-min
Author information +
文章历史 +

摘要

归纳了荧光粉表面典型无机膜层的功能,介绍了荧光粉表面膜层的包覆技术,重点介绍了溶胶-凝胶法、化学沉淀法、非均匀成核法、乳胶法、均相沉积法等湿法包覆技术的工艺流程及当前的研究现状,并提出了制膜过程中的注意事项,最后指出了荧光粉表面包覆技术的发展方向。

Abstract

The function of inorganic surface coating of fluorescent powders was classified. The fabrication technologies of surface coating of fluorescent powders were introduced including technical processes of sol-gel process, chemical deposition,nonuniform nucleation, emulsion method, homogeneous deposition and so on and research present . The notice points during their fabrications were listed. Finally, the blueprint of the surface coating of fluorescent powders in future was pointed out .

关键词

荧光粉; 膜层功能; 包覆方法

Key words

phosphor; surface coating function; coating technology

引用本文

导出引用
郭萍, 朱宪忠, 张彦娜, 曾明敏. 荧光粉表面包覆膜制备方法及其功能的研究进展[J]. 表面技术. 2013, 42(4): 100-103,118
GUO Ping, ZHU Xian-zhong, ZHANG Yan-na, ZENG Ming-min. Progress of Fabrication and Function of Surface Coating of Fluorescent Powders[J]. Surface Technology. 2013, 42(4): 100-103,118

基金

江苏省自然科学基金资助项目( BK2012869) ;南京信息职业技术学院基金课题( YKJ12-019)

PDF(3654 KB)

Accesses

Citation

Detail

段落导航
相关文章

/