制备温度和电流密度对不锈钢基PbO2 电极电化学性能的影响

杜重麟, 廖登辉, 余强

表面技术 ›› 2012, Vol. 41 ›› Issue (5) : 18-21,37.

PDF(4311 KB)
PDF(4311 KB)
表面技术 ›› 2012, Vol. 41 ›› Issue (5) : 18-21,37.
研究与探索

制备温度和电流密度对不锈钢基PbO2 电极电化学性能的影响

  • 杜重麟1, 廖登辉2, 余强2
作者信息 +

The Effect of Preparation Temperature and Current Density on the Electrochemical Properties of PbO2 Electrode

  • DU Chong-lin, LIAO Deng-hui, YU Qiang
Author information +
文章历史 +

摘要

在不同温度和电流密度的条件下,制备不锈钢基PbO2 电极,分析了电极的析氧曲线及析氧动力学参数,进而考察了温度和电流密度对PbO2 电极节能性和电催化活性的影响。结果表明:温度为80℃,电流密度为30mA/cm2 时,制备的电极成分稳定,重现性好,可有效降低槽电压,电催化活性良好;在小电流密度下的主要产物为β-PbO2,大电流密度下生成部分α-PbO2;与传统的铅基阳极材料相比,该PbO2 电极节能性和催化活性均有较大程度的提高。

Abstract

Through the analysis of oxygen evolution curve and oxygen evolution kinetic parameters of PbO2 electrode on stainless steel substrate prepared by different temperature and different current density, the effect of temperature and current density on the energy saving property and catalytic activity of PbO2 electrode was studied. The results show that when the temperature is 80℃, current density is 30 mA/cm2, the electrode have a stable composition and good reproducibility, the cell voltage is decreased and have a good electro-catalytic activity; The mainly products are β-PbO2 at low current density and there are partial products are α-PbO2 at high current density; The energy saving property and catalytic activity are highly improved compared with the traditional Pb-Ag alloy anode.

关键词

PbO2 电极;析氧过电位;电催化活性;槽电压

Key words

PbO2 electrode; overpotential of oxygen evolution; electro-catalytic activity; cell voltage

引用本文

导出引用
杜重麟, 廖登辉, 余强. 制备温度和电流密度对不锈钢基PbO2 电极电化学性能的影响[J]. 表面技术. 2012, 41(5): 18-21,37
DU Chong-lin, LIAO Deng-hui, YU Qiang. The Effect of Preparation Temperature and Current Density on the Electrochemical Properties of PbO2 Electrode[J]. Surface Technology. 2012, 41(5): 18-21,37

基金

昆明理工大学分析测试基金(2011452)

PDF(4311 KB)

Accesses

Citation

Detail

段落导航
相关文章

/