水泵密封环喷熔自熔合金粉末及其抗磨蚀性能的研究

李彦迪, 韩伟

表面技术 ›› 2012, Vol. 41 ›› Issue (4) : 60-62.

表面技术 ›› 2012, Vol. 41 ›› Issue (4) : 60-62.
应用技术

水泵密封环喷熔自熔合金粉末及其抗磨蚀性能的研究

  • 李彦迪1, 韩伟2
作者信息 +

Research on Self-melting Alloy Powder of Pump Seal-ring and Its Wear Resistance

  • LI Yan-di1, HAN Wei2
Author information +
文章历史 +

摘要

针对固海扬水工程中泵站水泵密封环在高含沙水质条件下使用寿命短的问题,以镍基自熔性合金粉末为抗磨蚀层材料,采用氧-乙炔焰喷焊工艺在铸钢密封环上喷焊合金层,并进行抗磨蚀试验。结果表明:与铸钢密封环相比,喷焊合金层的密封环的抗磨损和汽蚀性能明显增强,使用寿命是铸钢密封环的2.75倍以上。

Abstract

Under the condition of water with high sand content in pump station of ningxia-sea pumping project, the pump seal-ring is easily worn out. The oxy-acetylene flame spraying process was used to spray Ni-based self-fluxing alloy powder on the base of cast steel seal-ring for wear resistance experiment. The results show that, new seal-ring takes great advantages over the cast steel seal-ring in both resisting wear and cavitation and its life is over 2.75 times longer than that of the cast steel seal-ring.

关键词

水泵;密封环;自熔合金粉末;抗磨蚀

Key words

pump; wearing ring; self-melting alloy powder; wear resistance

引用本文

导出引用
李彦迪, 韩伟. 水泵密封环喷熔自熔合金粉末及其抗磨蚀性能的研究[J]. 表面技术. 2012, 41(4): 60-62
LI Yan-di, HAN Wei. Research on Self-melting Alloy Powder of Pump Seal-ring and Its Wear Resistance[J]. Surface Technology. 2012, 41(4): 60-62

基金

国家自然科学基金资助项目(51079066)

Accesses

Citation

Detail

段落导航
相关文章

/