目的 针对传统光刻-掩膜工艺在制备曲面金属网栅时存在的网栅凸起易损、曲面成型困难等瓶颈,本研究旨在开发一种适用于曲面光学窗口的高性能内嵌型金属网栅制备工艺,满足武器装备对曲面光窗电磁屏蔽、高透光与耐环境性能的迫切需求。方法 提出“涂层-刻蚀-镀膜-剥离”4步制备流程,采用飞秒激光刻蚀技术在曲面K9玻璃衬底上实现高精度图形化。系统研究有机涂层的均匀性调控、飞秒激光功率与频率对刻蚀形貌的影响、离子束辅助镀膜工艺优化等关键环节,并结合电磁波传输理论与光学衍射模型,分析内嵌结构的电磁屏蔽机理与透光特性。结果 通过优化喷涂参数,获得表面光滑、致密的有机光刻涂层;在频率为20~50 kHz、功率为0.2~1.5 W范围内,飞秒激光可稳定刻蚀出线宽约5 μm的精密槽型,边缘整齐无热损伤;在曲面K9半球罩上成功制备内嵌式金属网栅(中心线宽为6.2 μm,周期为250 μm),其可见光透光率与理论值偏差<1.5%,在1~18 GHz频段内典型频率电磁屏蔽效能≥15 dB,膜层结合力≥9 N/cm。结构表征显示网栅呈现“中间内嵌、边缘微凸”形貌,结合力显著优于传统凸起结构。结论 本研究开发的飞秒激光辅助4步工艺可实现曲面衬底内嵌式金属网栅的高质量制备,其内嵌结构通过机械互锁与Cr过渡层应力缓冲作用,显著提升了膜层结合力。该网栅在保持高透光性的同时具备良好的宽频电磁屏蔽效能,物理机理分析表明飞秒激光的“冷加工”特性与非热平衡材料去除机制是抑制热影响、实现精密刻蚀的关键。本研究为高性能曲面电磁屏蔽光窗的工程化研制提供了可靠的工艺路线与理论支撑。
Abstract
The work aims to develop a novel four-step fabrication process of "coating, femtosecond laser ablation, ion-beam-assisted deposition, and lift-off" to produce embedded metallic mesh structures on curved optical windows, overcoming the inherent fragility of raised mesh lines and the difficulties of conformal patterning on non-planar substrates that plague conventional lithography-based methods. The procedure starts with spray-coating an organic photoresist-like layer onto a curved K9 glass substrate, where the spraying parameters are systematically optimized to achieve a smooth and dense coating with high uniformity across the non-planar surface. Subsequently, femtosecond laser ablation is employed to directly write micro-grooves on the curved dome, and the effects of laser power (0.2-1.5 W) and repetition frequency (20-50 kHz) on the ablation morphology are thoroughly investigated. Within this parameter window, the laser stably produces precision grooves with a linewidth of approximately 5 μm, featuring clean edges and no observable thermal damage, which confirms the "cold" ablation nature and non-thermal equilibrium removal mechanism characteristic of femtosecond laser-matter interaction. The patterned grooves are then subjected to ion-beam-assisted deposition to metallize the surfaces, with the deposition conditions optimized to ensure good step coverage and strong interfacial bonding. Finally, a peel-off step removes the residual organic template, leaving the metal grid partially embedded in the glass substrate. On a curved K9 hemispherical dome, the fabricated embedded mesh exhibits a center linewidth of 6.2 μm and a period of 250 μm. Structural characterization reveals a distinct cross-sectional profile where the central portion of the grid lines is recessed into the glass surface while the edges slightly protrude, forming a hybrid topography that inherently protects the conductive lines from external abrasion. The optical transmittance in the visible band shows excellent agreement with theoretical predictions, with a deviation of less than 1.5% from the calculated values, indicating that the embedded geometry effectively suppresses higher-order diffraction losses. In terms of electromagnetic performance, the mesh provides a shielding effectiveness of no less than 15 dB across the 1-18 GHz frequency range, demonstrating effective broadband shielding capability. Most importantly, the adhesion strength between the embedded metal grid and the curved glass substrate reaches 9 N/cm or higher, significantly surpassing that of conventional surface-mounted raised structures. This remarkable adhesion is attributed to the synergistic effects of mechanical interlocking enabled by the groove sidewall geometry and the stress-buffering function of the Cr transition layer, together ensuring robust interfacial integrity even under mechanical and thermal stress. The underlying physical mechanism is further analyzed: the femtosecond laser's ultrashort pulse duration and ultrahigh peak intensity induce multiphoton ionization and Coulomb explosion, leading to material removal with minimal heat diffusion, which is the key to achieving precise groove formation without micro-cracks or recast layers on the curved surface. Moreover, the embedded design not only enhances durability but also maintains high optical transparency and stable shielding performance, as verified by both electromagnetic wave transmission theory and optical diffraction models. Overall, this work provides a reliable engineering route for manufacturing high-performance embedded metal meshes on curved optical windows, offering an alternative to planar lithographic approaches that are intrinsically fragile and limited to flat surfaces. The achieved combination of high visible transmittance (closely matching theoretical values), broadband electromagnetic shielding (≥15 dB), and excellent adhesion (>9 N/cm) meets the stringent requirements for advanced optoelectronic systems in military and aerospace applications, and the proposed methodology can be adapted to other curved geometries.
关键词
飞秒激光 /
金属网栅 /
曲面光窗 /
电磁屏蔽 /
离子束辅助镀膜
Key words
femtosecond laser /
metal mesh /
curved optical window /
electromagnetic shielding /
ion beam-assisted coating
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] YANG B R, GUI X C, ZHANG Y, et al.Ultra-High Figure-of-Merit Flexible, Transparent, and Conductive Grid Films for Electrothermal and Electromagnetic Shielding Applications[J]. Nano-Micro Letters, 2021, 13(1): 1-14.
[2] 陆振刚. 基于圆环和双层金属网栅结构的光学窗电磁屏蔽方法研究[D]. 哈尔滨: 哈尔滨工业大学, 2007.
LU Z G.Electromagnetic shielding methods for optical windows based on ring and double-layer metallic meshes[D]. Harbin: Harbin Institute of Technology, 2007.
[3] CHARAKLIAS D, QIANG D Y, DOREY R, et al.Electro-Thermal Response of Thin Film Heaters Based on Embedded Periodic Metallic Mesh[J]. Advanced Theory and Simulations, 2025, 8(6): 2401225.
[4] LIANG Z C, ZHAO Z Y, PU M B, et al.Metallic Nanomesh for High-Performance Transparent Electromagnetic Shielding[J]. Optical Materials Express, 2020, 10(3): 796.
[5] ZHANG Y Q, DONG H X, LI Q S, et al.Double-Layer Metal Mesh Etched by Femtosecond Laser for High- Performance Electromagnetic Interference Shielding Window[J]. RSC Advances, 2019, 9(39): 22282-22287.
[6] GLADHILL R, NAKAGAWA K H.Photomask Manufacturability and Pattern Fidelity for Curvilinear Structures[C]//Proceedings of SPIE, 2018.
[7] 麻皓月, 张宏玲, 曹琳, 等. 一种曲面金属网栅电磁屏蔽光学窗口及其制备方法和应用: CN202411303364.7[P].2024-12-27.
MA H Y, ZHANG H L, CAO L, et al. Curved Metal Mesh Electromagnetic Shielding Optical Window and Its Preparation Method and Application: CN202411303364.7[P].2024-12-27.
[8] WANG J L, SAER A, WANG X, et al.Absorptive Metasurface with Optical Transparency for Broadband RCS Reduction[J]. Optics Express, 2024, 32(13): 22291.
[9] SHI K, SU J H, LIANG H F, et al.Highly Optically Transparent Graphene Mesh for Electromagnetic Interference Shielding[J]. Diamond and Related Materials, 2022, 123: 108849.
[10] 中国国家标准化管理委员会. 透明塑料透光率和雾度的测定: GB/T 2410—2008[S]. 北京: 中国标准出版社, 2008: 1-9.
Standardization Administration of the People's Republic of China. Determination of the Luminous Transmittance and Haze of Transparent Plastics: GB/T 2410—2008[S]. Beijing: Standards Press of China, 2008: 1-9.
[11] 中国人民解放军总装备部. 电磁屏蔽材料屏蔽效能测试方法: GJB 8820—2015[S]. 北京: 总装备部军标出版发行部, 2015: 1-15.
General Armaments Department of the Chinese People's Liberation Army. Measuring Methods for Shielding Effectiveness of Electromagnetic Shielding Materials: GJB 8820—2015[S]. Beijing: Military Standard Publication and Distribution Department of the General Armaments Department, 2015: 1-15.
[12] 中国国家标准化管理委员会. 光学仪器用透明导电薄膜规范: GB/T 26598—2011[S]. 北京: 中国标准出版社, 2011: 1-5.
Standardization Administration of the People's Republic of China. Specification for Transparent Conductive Thin Film for Optical Instruments: GB/T 26598—2011[S]. Beijing: Standards Press of China, 2011: 1-5.
[13] XU J, LI X L, ZHONG Y, et al.Glass-Channel Molding Assisted 3D Printing of Metallic Microstructures Enabled by Femtosecond Laser Internal Processing and Microfluidic Electroless Plating[J]. Advanced Materials Technologies, 2018, 3(12): 1800372.
[14] HERNANDEZ-RUEDA J, TROY N W, FREUDENBERGER P, et al.Femtosecond Laser-Matter Interactions in Ternary Zinc Phosphate Glasses[J]. Optical Materials Express, 2018, 8(12): 3622.
[15] 张晓, 刘凯, 王明娣, 等. 基于飞秒激光的覆铜板刻蚀工艺[J]. 光学学报, 2019, 39(12): 1214003.
ZHANG X, LIU K, WANG M D, et al.Etching Technology for Copper-Clad Laminates Based on Femtosecond Laser[J]. Acta Optica Sinica, 2019, 39(12): 1214003.
[16] 陈亮, 刘晓东, 刘静, 等. 飞秒激光在石英玻璃表面刻蚀微槽的研究[J]. 光学学报, 2020, 40(23): 2314001.
CHEN L, LIU X D, LIU J, et al.Microgroove Etching with Femtosecond Laser on Quartz Glass Surfaces[J]. Acta Optica Sinica, 2020, 40(23): 2314001.
[17] WANG S T, YANG J J, DENG G L, et al.Femtosecond Laser Direct Writing of Flexible Electronic Devices: A Mini Review[J]. Materials, 2024, 17(3): 557.
[18] 冯杰才, 徐瑞, 董晓浩, 等. 光学窗口材料飞秒激光加工研究进展[J]. 热加工工艺, 2025, 54(14): 124-133.
FENG J C, XU R, DONG X H, et al.Research Progress of Femtosecond Laser Processing for Optical Window Materials[J]. Hot Working Technology, 2025, 54(14): 124-133.
[19] FRAGGELAKIS F, LINGOS P, TSIBIDIS G D, et al.Double-Pulse Femtosecond Laser Fabrication of Highly Ordered Periodic Structures on Au Thin Films Enabling Low-Cost Plasmonic Applications[J]. ACS Nano, 2025, 19(25): 23258-23275.
[20] 付学成, 瞿敏妮, 权雪玲, 等. 电子束蒸镀快速沉积铜膜研究[J]. 真空与低温, 2023, 29(1): 5-11.
FU X C, QU M N, QUAN X L, et al.Rapid Deposition of Copper Film by Electron Beam Evaperation[J]. Vacuum and Cryogenics, 2023, 29(1): 5-11.
[21] 王展博, 张泽玺, 杨斌, 等. 应力缓冲层对玻璃基板填孔结构内应力及可靠性的调控规律研究[J]. 电子与封装, 2025, 25(7): 30-38.
WANG Z B, ZHANG Z X, YANG B, et al.Regulation Study of Stress Buffer Layer on the Internal Stress and Reliability of Glass Substrate Hole-Filling Structures[J]. Electronics & Packaging, 2025, 25(7): 30-38.
[22] ZIMMER S, HELWIG M, WINKLER A, et al.Modeling Electrical Conductivity of Metal Meshes for Predicting Shielding Effectiveness in Magnetic Fields of Wireless Power Transfer Systems[J]. Electronics, 2022, 11(14): 2156.
[23] LU Z G, ZHANG Y L, LU X, et al.Two-Step Randomized Design of Multi-Rings Metallic Mesh for Ultra-Uniform Diffraction Distribution[J]. Optics & Laser Technology, 2021, 144: 107396.
[24] 卓红艳, 刘志强, 彭文, 等. 光学探测系统电磁屏蔽设计与应用[J]. 红外与激光工程, 2020, 49(6): 20190412.
ZHUO H Y, LIU Z Q, PENG W, et al.Design and Application of Electromagnetic Shielding of Optical Detection System[J]. Infrared and Laser Engineering, 2020, 49(6): 20190412.
[25] ZHANG Y Q, DONG H X, MOU N L, et al.High-Performance Broadband Electromagnetic Interference Shielding Optical Window Based on a Metamaterial Absorber[J]. Optics Express, 2020, 28(18): 26836.
基金
国家重点研发计划(2023YFB3811300); 山西省重点研发计划(202402030201007)