目的 针对聚丙烯(PP)与碳纤维增强复合材料(CFRP)异质结构因表面极性差异导致的界面连接难题,采用大气低温等离子体技术对PP表面进行改性处理,以探索一种高效的界面强化策略。方法 结合中心组合设计(CCD)与响应面法(RSM),系统研究处理时间、处理距离和气体流速对PP表面润湿行为及PP/CFRP界面结合性能的非线性影响规律,并建立基于二阶多项式的工艺预测模型。结果 响应面分析表明,处理距离对界面拉伸强度(TWF)的主效应最为显著。在实际最优工艺参数(处理时间为133 s,处理距离为12.2 mm,气体流速为533 L/h)下,连接试样的TWF试验值达到2.35 MPa,与模型预测值(2.32 MPa)的相对误差仅为1.3%。微观机理方面,等离子体处理引入的高能极性基团使PP总表面自由能大幅提升至67.3 mN/m,显著改善了其表面活性。断口形貌进一步证实,随着界面结合力的增强,接头的失效机制由单一的界面黏附破坏,转变为PP基体内聚破坏与CFRP表层树脂撕裂耦合的复杂混合失效机制。结论 本研究从微观理化演变与宏观断裂力学双重维度,揭示了等离子体表面改性对PP/CFRP异质界面的强化机理,为高分子/碳纤维轻量化复合结构的规模化制造与工艺优化提供了可靠的理论依据与工程指导。
Abstract
Joining non-polar polypropylene (PP) to polar carbon fiber reinforced polymer (CFRP) is notoriously difficult due to fundamental interfacial incompatibility. To solve this, the work aims to employ atmospheric pressure plasma treatment (APPT) to modify the PP surface. Instead of relying on trial and error, the exact nonlinear relationship between plasma parameters and macroscopic bonding strength was mapped out through rigorous statistical modeling. 14 different treatment schemes were set up via Response Surface Methodology (RSM) combined with a Central Composite Design (CCD). The three main variables tested were plasma treatment time (10-200 s), nozzle distance (5-20 mm), and gas flow rate (450-600 L/h). To evaluate how well the materials bonded, T-peel tests were conducted at a loading rate of 1 mm/min to measure the interfacial tensile strength (TWF). The surface wettability was tracked by measuring the optical contact angles of deionized water and ethylene glycol. This allowed for calculation of the Surface Free Energy (SFE) with the OWRK two-liquid model, including its polar and dispersive components. Without any treatment, the PP and CFRP simply did not stick together and the specimens fell apart directly during curing, resulting in a TWF of 0 MPa. After the plasma treatments, the multivariate nonlinear regression was used to build a robust second-order polynomial model for predicting bonding strength. Looking at the generated 3D response surfaces, the distance of the plasma nozzle made the biggest difference in TWF, while the interaction between treatment time and gas flow rate was relatively minor. The model pointed to a clear optimal setup: 133 s of treatment, a 12.2 mm nozzle distance, and a 533 L/h gas flow rate. When these exact settings were tested in the lab, the actual TWF hit 2.35 MPa. That was only a 1.3% deviation from the model's prediction of 2.32 MPa, proving the model was highly reliable for guiding actual production. Looking at the surface chemistry, the untreated PP was highly hydrophobic, showing a water contact angle of 90.3° and a low SFE of just 31.8 mN/m. The plasma treatment changed this completely by roughening the surface on a microscopic level and introducing high-energy polar oxygen groups. Under the best conditions, the total SFE jumped to 67.3 mN/m, mostly because the polar component spiked to 62.7 mN/m. A secondary optimization model was also employed just for the SFE, which gave a window of 136 s, 12.0 mm, and 544 L/h. Because this was only about 2% off from the TWF-optimized settings, it confirmed that the process successfully hit a "sweet spot": maximizing polar grafting without causing excessive thermal damage to the plastic. The way the joints broke during testing told the exact same story. When the treatment energy was too low (TWF< 0.1 MPa), the fracture surfaces were completely smooth. The structural adhesive simply peeled off the PP, meaning no real anchor points were formed. However, for the optimized specimens (TWF>1.8 MPa), the failure mode shifted dramatically. The joints did not just fail at the interface, instead, the PP matrix itself tore apart, leaving visible bits of carbon fiber and resin on the surface. This definitive shift from simple adhesive failure to a mixed cohesive failure proves that the plasma treatment creates mechanical interlocking and chemical bonds strong enough to outperform the intrinsic strength of the base materials.
关键词
聚丙烯 /
碳纤维增强复合材料 /
大气低温等离子体 /
响应面法 /
界面结合性能 /
表面能
Key words
polypropylene (PP) /
carbon fiber reinforced polymer (CFRP) /
atmospheric low-temperature plasma /
response surface methodology (RSM) /
interfacial bonding performance /
surface free energy (SFE)
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] TANG H F.Research Progress of Carbon Fiber Composite Materials in Automobile Body Lightweight[J]. MATEC Web of Conferences, 2025, 410: 03011.
[2] HUACHO CHÁVEZ I F, POZO SAFLA E R, BRAVO MOROCHO V D, et al. Reinforced Polymers in the Automotive Industry: Lightweight Materials, Energy Efficiency and Emission Reduction[J]. Sapienza: International Journal of Interdisciplinary Studies, 2025, 6(3): e25052.
[3] ALMAJALI M R, MAAITH O N, AL-MAHADIN A.Development of High-Performance Composite Materials for Aerospace Applications[C]//35th European Safety and Reliability Conference (ESREL 2025) and the 33rd Society for Risk Analysis Europe Conference (SRA-E 2025). Singapore: Research Publishing Services, 2025.
[4] 李颖, 冯兴国, 王胜国, 等. 连续玻璃纤维增强聚丙烯复合材料的性能研究[J]. 新技术新工艺, 2022(9): 44-48.
LI Y, FENG X G, WANG S G, et al.Research on Properties of Continuous Glass Fiber Reinforced Polypropylene Composites[J]. New Technology & New Process, 2022(9): 44-48.
[5] ZHANG J, CHEVALI V S, WANG H, et al.Current Status of Carbon Fibre and Carbon Fibre Composites Recycling[J]. Composites Part B: Engineering, 2020, 193: 108053.
[6] MADDAH H A.Polypropylene as a Promising Plastic: A Review[J]. American Journal of Polymer Science, 2016, 6(1): 1-11.
[7] LIN M H, HUANG X, GUO J B, et al.Thermal Oxidative Aging Properties of Polypropylene Reinforced by Glass Fibers with Different Lengths[J]. Engineering Plastics Application, 2024, 52(8): 148-153.
[8] KHAN A S, LIU F, DONG P.Joining of Metal and Non- Polar Polypropylene Composite through a Simple Functional Group Seeding Layer[J]. Journal of Manufacturing Processes, 2023, 85: 90-100.
[9] PRIMC G.Hydrophilization of Polypropylene by Gaseous Plasma Treatments and Hydrophobic Recovery[J]. Polymers, 2025, 17(19): 2644.
[10] CHEN X, WANG Y, ZHANG B, et al.Direct Joining of Recycled Polypropylene Composites with Aluminum via Screw Extrusion-Based Additive Manufacturing[J]. Journal of Materials Processing Technology, 2025, 321: 118150.
[11] JIANG M Q, LI Y, ZHANG H Y.Corrosion Resistance and Plasma Surface Treatment on Titanium and Titanium Alloys: A Review[J]. Coatings, 2025, 15(10): 1180.
[12] 程璐. 含氮低温等离子体材料表面处理及其在生物医疗领域的应用[D]. 杭州: 浙江大学, 2020.
CHENG L.Surface Treatment of Materials with Nitrogen- containing Low-temperature Plasma and Its Application in the Biomedical Field[D]. Hangzhou: Zhejiang University, 2020.
[13] 方志, 章程, 胡建杭, 等. 空气中介质阻挡放电对聚丙烯进行表面改性的研究[J]. 真空科学与技术学报, 2008, 28(5): 404-409.
FANG Z, ZHANG C, HU J H, et al.Surface Modification of Polypropylene Films Deposited by Dielectric Barrier Discharge in Air[J]. Chinese Journal of Vacuum Science and Technology, 2008, 28(5): 404-409.
[14] 杨海涛, 严彪. 等离子表面处理对低粗糙度铜箔与树脂界面结合性能的影响[J]. 表面技术, 2023, 52(7): 278-287.
YANG H T, YAN B.Effect of Plasma Surface Treatment on Interface Adhesive Performance of Low Roughness Copper Foil and Resin[J]. Surface Technology, 2023, 52(7): 278-287.
[15] WEN L W, XU X Y, QIN L H.Effect of Low- Temperature Plasma Surface Treatment on Bonding Properties of Single-Lap Joint of Thermosetting Composites[J]. Polymers, 2023, 15(7): 1631.
[16] WEN L W, WANG R Z, XU E T.Optimization and Mechanism Study of Bonding Properties of CFRP/Al7075 Single-Lap Joints by Low-Temperature Plasma Surface Treatment[J]. Coatings, 2024, 14(5): 541.
[17] CUI H, GAO X L.Surface Modification on Polyimide Yarn by Plasma Treatment to Enhance Adhesion with Polypropylene Resin[J]. Polymers, 2022, 14(19): 4232.
[18] DING Y, HE D Y, SHIRAI H.Deposition of Low Dielectric Constant SiOC Films by Using an Atmospheric Pressure Microplasma Jet[J]. Journal of Physics D: Applied Physics, 2009, 42(12): 125503.
[19] FRICKE K, STEFFEN H, VON WOEDTKE T, et al.High Rate Etching of Polymers by Means of an Atmospheric Pressure Plasma Jet[J]. Plasma Processes and Polymers, 2011, 8(1): 51-58.
[20] OUYANG Y F, WANG H S, ZHANG X, et al.Pre- Plating Properties of ABS Treated by Low Temperature Plasma[J]. China Plastics, 2022, 36(8): 80-86.
[21] MAGALLÓN CACHO L, PÉREZ BUENO J J, MEAS VONG Y, et al. Novel Green Process to Modify ABS Surface before Its Metallization: Optophysic Treatment[J]. Journal of Coatings Technology and Research, 2015, 12(2): 313-323.
[22] XOSOCOTLA O, MARTINEZ H, CAMPILLO B.Crystallinity and Hardness Enhancement of Polypropylene Using Atmospheric Pressure Plasma Discharge Treatment[J]. Advances in Science, Technology and Engineering Systems Journal, 2020, 5(6): 1250-1257.
[23] CHEN Y M, GAO Q Y, HE X M, et al.Enhancing Adhesion Performance of No-Flow Prepreg to Form Multilayer Structure of Printed Circuit Boards with Plasma-Induced Surface Modification[J]. Surface and Coatings Technology, 2018, 333: 24-31.
[24] ZHOU Y, FANG Z, ZHANG Y, et al.Surface Hydrophilic Modification of Polypropylene by Nanosecond Pulsed Ar/O2 Dielectric Barrier Discharge[J]. Materials, 2025, 18(1): 95.
[25] CHOONG L F, CHEONG K Y, RAMAKRISHNAN S, et al.The Adhesion of Epoxy Treated by Microwave Oxygen Plasma[J]. Applied Surface Science, 2021, 563: 150224.
[26] PRIMC G.Hydrophilization of Polypropylene by Gaseous Plasma Treatments and Hydrophobic Recovery[J]. Polymers, 2025, 17(19): 2644.
[27] SHAO X J, ZHANG G J, ZHAN J Y, et al.Research on Surface Modification of Polytetrafluoroethylene Coupled with Argon Dielectric Barrier Discharge Plasma Jet Characteristics[J]. IEEE Transactions on Plasma Science, 2011, 39(11): 3095-3102.
[28] PEREIRA R F, BARRIAS C C, GRANJA P L, et al.Plasma-Treated Polymeric Biomaterials for Improved Surface and Cell Adhesion[J]. Materials Today Bio, 2024, 25: 100988.
[29] WANG H, YANG C H, HE L M, et al.Enhancement of Polypropylene Bonding through Plasma-Ultrasonic Treatment[J]. Polymers, 2025, 17(6): 726.
[30] LU B Z, QIAO Y, NICKERSON E K, et al.Improving Adhesive Bonding of Short Carbon Fiber Thermoplastic Composites to Aluminum Alloys with a Hybrid Laser- Plasma Surface Modification Strategy[J]. Materials & Design, 2025, 257: 114501.
[31] STRIBICK S, ALHADAD B.Laser Surface Texturing for Surface Preparation of Adhesive Bonding of Polypropylene[J]. The International Journal of Advanced Manufacturing Technology, 2025, 140(7/8): 4339-4354.
[32] LEE A A, QIAO Y, SHIN Y, et al.Multiple-Repeated Plasma Surface Treatments for Significantly Improving Bonding Performance of Metal-Carbon-Fiber-Reinforced Thermoplastic Polymer Dissimilar Adhesive Joints[J]. Advanced Engineering Materials, 2025, 27(9): 2402693.
[33] ZHANG Q, LIU N Z, ZHANG G M, et al.Study on the Influence of Plasma Treatment on the Adhesive Properties of PA6-CFRP Interface[J]. Acta Materiae Compositae Sinica, 2025, 42(9): 4999-5011.
[34] QI L L, MIN W, GAO R Z, et al.Optimization of Interfacial Bonding Properties between Thermoplastic Liners and Carbon Fiber-Reinforced Composites by Atmospheric-Pressure Plasma and Failure Mechanism Study[J]. Polymer Composites, 2023, 44(4): 2361-2378.
基金
工信部-科技创新2030重大项目(2024ZD0602200)