激光辅助磨削原位C-N-B涂层Ti6Al4V表面强化方法

李阳, 孙聪, 杨展龙

表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 125-136.

PDF(12360 KB)
PDF(12360 KB)
表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 125-136. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.011
精密与超精密加工

激光辅助磨削原位C-N-B涂层Ti6Al4V表面强化方法

  • 李阳1, 孙聪2,*, 杨展龙2
作者信息 +

Surface Strengthening Method of Ti6Al4V with In-situ C-N-B Coating via Laser-assisted Grinding

  • LI Yang1, SUN Cong2,*, YANG Zhanlong2
Author information +
文章历史 +

摘要

目的 现有的生产模式将Ti6Al4V表面改性和光整加工分离,存在能耗冗余和生产成本高等突出问题。针对这一问题,本研究提出一种激光辅助C-N-B共渗Ti6Al4V表面高性能磨削方法。方法 通过制备可分离式BN-石墨复合涂层,利用激光辅助磨削Ti6Al4V表面的非线性热力耦合作用,在基体表面构建富含多组分强化相的熔覆层。结果 加工后Ti6Al4V表面硬度高达947.71HV,是基体的286%,且沿层深度方向有良好的硬度梯度;界面结合强度达到593.04 MPa,与独立激光合金化与磨削分离加工相比提高了11.64%;熔覆层表现出优异的耐腐蚀性,电荷转移阻力为基体两倍的介质,有效阻挡了电荷转移。同时,增强了材料表面的耐磨性,磨损损失仅为常规磨削工艺的2.15%,H³/E²值达到0.009 2 GPa,磨损疤痕的宽度和深度显著减少,黏着磨损和磨料磨损得到有效抑制。结论 激光辅助磨削可实现Ti6Al4V表面C、N、B元素共同渗入,实现表面性能及服役寿命的提升,本研究成果可为Ti6Al4V的抗疲劳高性能制造提供了关键的技术和理论支持。

Abstract

Ti6Al4V titanium alloy, renowned for its exceptional specific strength, superior thermal stability, and excellent biocompatibility, has been extensively applied in critical components across aerospace, petrochemical engineering, and biomedical fields, yet its inherent drawbacks including low surface hardness, poor wear resistance, and insufficient corrosion stability under harsh service conditions severely restrict the long-term service life and application scope of Ti6Al4V parts under dynamic load conditions and complex friction-corrosion coupling environments. Traditional surface modification technologies for titanium alloys, such as thermal spraying, physical vapor deposition, and individual laser alloying, generally separate surface strengthening and finishing processes, which not only lead to redundant energy consumption, complex production procedures, and high manufacturing costs, but also face critical bottlenecks including weak bonding strength between the coating and the substrate, uneven distribution of reinforced phases, internal defects like pores and cracks, and insufficient bearing capacity under heavy load conditions. Moreover, in order to achieve excellent surface quality, laser processing is typically followed by mechanical treatments such as turning and grinding. This separate-process approach results in complex production workflows, low production efficiency, and excessive energy consumption. To overcome these prominent problems, a high-performance grinding method was proposed for Ti6Al4V surface with laser-driven C-N-B co-infiltration, where a separable BN-graphite composite coating was specially designed and prepared, and the non-linear thermo-mechanical coupling effect of laser irradiation and grinding wheel was utilized to construct a cladding layer rich in multi-component reinforced phases on the Ti6Al4V substrate surface in a single processing step. It was worth noting that there existed a significant interaction between surface strengthening and surface finishing. The large amount of energy released during the laser alloying process caused material melting and deformation, which affected the surface morphology and quality of the final parts. Meanwhile, the strong thermo-mechanical coupling effect during processing also impaired the microstructural uniformity of the cladding layer. To this end, three groups of comparative experiments, including the proposed laser-assisted grinding integrated process, separate laser alloying and grinding process, and conventional grinding, were systematically conducted, and the microstructure, phase composition, mechanical properties, corrosion resistance, and tribological behavior of the modified surfaces were comprehensively characterized through scanning electron microscopy, energy dispersive spectroscopy, microhardness test, shear test, electrochemical measurement, friction and wear test, and nanoindentation test. The results demonstrated that the proposed method successfully fabricated a dense cladding layer with excellent metallurgical bonding to the substrate mainly composed of TiC, TiN and TiB reinforced phases; the optimized sample achieved a surface hardness of 947.71HV (286% that of the substrate) with a favorable hardness gradient along the depth direction, an interfacial bonding strength of 593.04 MPa with an 11.64% increase compared with the separate process, outstanding corrosion resistance with a charge transfer resistance twice that of the substrate, and superior wear performance with only 2.15% wear loss of the conventional grinding sample and an H³/E² value up to 0.009 2 GPa, which effectively inhibited adhesive and abrasive wear. This study realizes the synchronous improvement of surface performance and machining accuracy of Ti6Al4V, and provides key technical and theoretical support for the anti-fatigue high-performance manufacturing of titanium alloy key components.

关键词

激光辅助磨削 / Ti6Al4V / 复合涂层 / 表面性能

Key words

laser-assisted grinding / Ti6Al4V / composite coating / surface performance

引用本文

导出引用
李阳, 孙聪, 杨展龙. 激光辅助磨削原位C-N-B涂层Ti6Al4V表面强化方法[J]. 表面技术. 2026, 55(21): 125-136
LI Yang, SUN Cong, YANG Zhanlong. Surface Strengthening Method of Ti6Al4V with In-situ C-N-B Coating via Laser-assisted Grinding[J]. Surface Technology. 2026, 55(21): 125-136
中图分类号: TG580   

参考文献

[1] FURLANI F, RONDINELLA A, ZANOCCO M, et al.Antibacterial and Biocompatible Behavior of Ti6Al4V and Geopolymer-Coated Ti6Al4V Functionalized with c[RGDfK[J]. Materials & Design, 2025, 259: 114941.
[2] ZHANG H Y, WANG B, YANG Z X, et al.Fabrication of Microcone Arrays on Ti6Al4V by Nanosecond Laser Nitriding[J]. International Journal of Mechanical Sciences, 2025, 287: 109942.
[3] HONG Y, SUN C, MA L, et al.Properties-Accuracy Synergistic Manufacturing of Ti6Al4V Surface Based on Laser Carburizing Grinding[J]. Tribology International, 2024, 192: 109329.
[4] TRAXEL K D, BANDYOPADHYAY A.Selective Laser Melting of Ti6Al4V-B4C-BN in Situ Reactive Composites[J]. Journal of Materials Research and Technology, 2022, 18: 2654-2671.
[5] LIN W H, TSAO S Y, CHENG T C, et al.Effect of Morphologies of Hydroxyapatite Powders on Thermal Sprayed Hydroxyapatite Coatings[J]. Surfaces and Interfaces, 2025, 60: 105948.
[6] WANG P F, CHEN D, WANG Q S, et al.Thermal Stability and Thermal Cycling Behavior of LGYYSZ/YSZ Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying[J]. Surface and Coatings Technology, 2025, 505: 132038.
[7] REICHMANN A, KAINZ C, SCHALK N, et al.Decomposition and Segregation Phenomena in PVD TiBN Coatings[J]. Materials & Design, 2025, 260: 114912.
[8] ZUO P, ZHU D, LI F, et al.Fabrication of Superhydrophobic Micro/Nanostructures of Titanium Alloy by Femtosecond Laser[J]. ACS Omega, 2025, 10(30): 33178-33191.
[9] PI Z Q, DU K P, CHEN X, et al.Laser Cladding Remanufacturing of Propeller ZCuAl8Mn13Fe3Ni2 Alloy[J]. Scientific Reports, 2025, 15: 12381.
[10] QIN X D, YANG H X, ZHAO Y, et al.Investigation of the Microstructural Characteristics of Laser-Cladded Ti6Al4V Titanium Alloy and Its Corrosion Behavior in Simulated Body Fluid[J]. Materials Today Communications, 2024, 41: 110780.
[11] HONG Y, SUN C, GUO Q, et al.High-Performance Ti6Al4V Surface Manufacture by Laser Carburising- Assisted Grinding[J]. Tribology International, 2024, 198: 109912.
[12] ZHANG Y, WU T, WANG Y F, et al.Adaptive Nonlinear- Error Control Method for Five-Axis Machining of Complex Structures[J]. International Journal of Mechanical Sciences, 2026, 313: 111322.
[13] HONG Y, LIANG C J, SUN C, et al.20CrMnTi Surface Strengthening Based on Laser-Assisted Carburizing Grinding[J]. Materials Characterization, 2024, 208: 113631.
[14] ZHANG K, YE T Q, GENG J T, et al.Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition[J]. International Journal of Heat and Mass Transfer, 2025, 236: 126330.
[15] HONG Y, SUN C, ZHANG H, et al.Ti6Al4V Laser Carburizing Grinding Surface Generation Considering Carbide Distribution[J]. Journal of Manufacturing Processes, 2025, 145: 454-466.
[16] LIU Y F, CUI X F, JIN G, et al.In-Situ Array TiN Reinforced Al-Cr-Ti-Nb-Mo Refractory High-Entropy Alloy Coating on Ti-6Al-4V Alloy by Gas Assisted Laser Nitriding[J]. Journal of Alloys and Compounds, 2024, 981: 173743.
[17] TOPTAN F, REGO A, ALVES A C, et al.Corrosion and Tribocorrosion Behavior of Ti-B4C Composite Intended for Orthopaedic Implants[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 61: 152-163.
[18] WEI Z Z, LI C, WANG Z Y, et al.A Comprehensive Dynamic Force Model Involved in Grinding of B4C Ceramics[J]. International Journal of Extreme Manufacturing, 2026, 8(3): 035103.
[19] FAN Z Z, REN W B, ZUO W H, et al.Comparative Study on the Reinforcement Effects of WC and TiC in the Laser Cladding Layer of Ti-6Al-4V Alloy[J]. Journal of Manufacturing Processes, 2025, 134: 589-602.
[20] SÜDMEYER I, HETTESHEIMER T, ROHDE M. On the Shear Strength of Laser Brazed SiC-Steel Joints: Effects of Braze Metal Fillers and Surface Patterning[J]. Ceramics International, 2010, 36(3): 1083-1090.
[21] YANG Z L, SUN C, WANG D W, et al.Ti6Al4V Surface Evolution Mechanism by Laser-Induced Multi-Element Infiltration Grinding[J]. Surface and Coatings Technology, 2026, 521: 133110.
[22] ZHAO W D, DONG Y L, YE C, et al.Simultaneously Improving Corrosion and Fatigue Resistance of A100 Steel by Laser Assisted Ultrasonic Nanocrystal Surface Modification[J]. International Journal of Fatigue, 2025, 199: 109056.
[23] YIN Y, SHANG Y B, HE W F, et al.Improving the Fretting Fatigue Properties of Ti-6Al-4V Dovetail Joint Treated by Laser Shock Peening and Shot Peening[J]. International Journal of Fatigue, 2025, 198: 108996.
[24] JI D D, CHEN H D, ZHANG J W, et al.Influence of Micro-Shot Peening and Traditional Shot Peening on Fatigue Performance and Fracture Behaviors of Ti-6Al-4V Alloy[J]. International Journal of Fatigue, 2025, 194: 108837.
[25] LI J, LUO K, AN Q.Unraveling the Hall-Petch to Inverse Hall-Petch Transition in Nanocrystalline CdTe[J]. International Journal of Mechanical Sciences, 2025, 286: 109852.
[26] LU P C, FENG H, LI H B, et al.A Strategy to Overcome the Negative Effect of Mg Treatment on Localized Corrosion and Enhance the Performance of High-Nitrogen Martensitic Stainless Steel by Mg&Ce Composite Treatment[J]. Corrosion Science, 2025, 249: 112852.
[27] LIU G J, LI C, ZHANG Y S.Study on the Correlation between Corrosion Potential and Polarization Resistance of Steel Reinforcement[J]. Electrochimica Acta, 2025, 522: 145957.
[28] TONG Z P, REN X D, REN Y P, et al.Effect of Laser Shock Peening on Microstructure and Hot Corrosion of TC11 Alloy[J]. Surface and Coatings Technology, 2018, 335: 32-40.
[29] ZHOU L L, GUO W L, HE G C, et al.Microstructure Evolution and Corrosion Behavior of Ti-6Al-4V Alloy Induced by Laser Shock Peening without Coating[J]. Journal of Materials Research and Technology, 2025, 39: 647-659.
[30] MIYATA Y, HANDA T, TAKAZAWA H.An Analysis of Current Fluctuations during Passive Film Breakdown and Repassivation in Stainless Alloys[J]. Corrosion Science, 1990, 31: 465-470.
[31] WEI Y, PAN Z M, FU Y, et al.Effect of Annealing Temperatures on Microstructural Evolution and Corrosion Behavior of Ti-Mo Titanium Alloy in Hydrochloric Acid[J]. Corrosion Science, 2022, 197: 110079.
[32] SARKAR S, KUMAR C S, NATH A K.Effects of Different Surface Modifications on the Fatigue Life of Selective Laser Melted 15-5 PH Stainless Steel[J]. Materials Science and Engineering: A, 2019, 762: 138109.
[33] ZMITROWICZ A.Wear Debris: A Review of Properties and Constitutive Models[J]. Journal of Theoretical and Applied Mechanics, 2005, 43(1): 3-35.
[34] ZHANG X Y, WEI D S, MA M D, et al.The Effect of Interfacial Contact and Damage Gradient on Fretting Fatigue of Ti-6Al-4 V Dovetail Assembly Using a Multiaxial Fatigue Framework[J]. International Journal of Fatigue, 2025, 199: 109058.
[35] HUANG H W, WANG Z B, LU J, et al.Fatigue Behaviors of AISI 316L Stainless Steel with a Gradient Nanostructured Surface Layer[J]. Acta Materialia, 2015, 87: 150-160.
[36] JIANG Y, YANG Q Y, GUO Q, et al.Enhancing Gear Surface Integrity: A Study of Longitudinal-Torsional Ultrasonic Strengthening Effect on Surface Roughness[J]. Journal of Manufacturing Processes, 2026, 161: 277-291.
[37] OHMURA T, WAKEDA M.Pop-in Phenomenon as a Fundamental Plasticity Probed by Nanoindentation Technique[J]. Materials, 2021, 14(8): 1879.
[38] WANG J H, GUAN S H, LIU M Q, et al.Subsurface Damage Characteristics of Fused Quartz Glass in Shear- Thickening Polishing[J]. Surface Science and Technology, 2025, 3(1): 8.
[39] CHENG J B, LIU D, LIANG X B, et al.Evolution of Microstructure and Mechanical Properties of in Situ Synthesized TiC-TiB2/CoCrCuFeNi High Entropy Alloy Coatings[J]. Surface and Coatings Technology, 2015, 281: 109-116.
[40] HONG Y, SUN C, WANG D W, et al.Integrated Laser Alloying-Grinding for Additive-Subtractive Manufacturing of Ti6Al4V Surface with B4C Coating[J]. Tribology International, 2025, 204: 110537.
[41] HUANG J C, ZHU J H, ZHOU K, et al.Probing Wear Mechanism of Ti6Al4V Micro-Textured Surfaces Processed by Laser-Assisted Grinding[J]. Journal of Alloys and Compounds, 2025, 1010: 178272.

基金

伊犁州科技计划项目(YZ2022Y011)

PDF(12360 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉