非离子表面活性剂对YAG晶体力流变抛光性能的影响

周开耀, 王旭, 王晓荣, 宋涛, 王佳焕, 韩云晓, 王金虎, 邓乾发, 吕冰海

表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 99-109.

PDF(13540 KB)
PDF(13540 KB)
表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 99-109. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.009
精密与超精密加工

非离子表面活性剂对YAG晶体力流变抛光性能的影响

  • 周开耀1,2, 王旭1,2,*, 王晓荣1,2, 宋涛1,2, 王佳焕1,2, 韩云晓1,2, 王金虎1,2, 邓乾发1,2, 吕冰海1,2
作者信息 +

Effect of Nonionic Surfactant on Force Rheological Polishing Performance of YAG Crystal

  • ZHOU Kaiyao1,2, WANG Xu1,2,*, WANG Xiaorong1,2, SONG Tao1,2, WANG Jiahuan1,2, HAN Yunxiao1,2, WANG Jinhu1,2, DENG Qianfa1,2, LYU Binghai1,2
Author information +
文章历史 +

摘要

目的 针对YAG晶体等硬脆材料高质量抛光需求,开展非离子表面活性剂调控下的力流变抛光工艺优化研究,明确关键工艺参数对抛光性能的影响规律,实现高质量、低损伤表面加工。方法 选取具有不同亲水亲油特性的非离子表面活性剂Tween 80和Span 80,配制不同浓度的力流变抛光液。基于力流变抛光技术设计正交试验与验证性抛光试验,系统研究表面活性剂体系、浓度、抛光速度和抛光角度对表面算术平均粗糙度(Sa)和材料去除率(RMRR)的影响规律,并采用信噪比分析与极差分析评估各因素的显著性。结果 非离子表面活性剂浓度为影响抛光性能的主导因素,其影响程度高于表面活性剂体系、抛光速度和抛光角度。当添加0.002 5%(质量分数) Tween 80、抛光转速为72 r/min、抛光角度为77.5°、抛光时间为60 min时,获得了Sa为0.76 nm的高质量表面。并提出了非离子表面活性剂在力流变抛光液中的作用机理。结论 非离子表面活性剂通过调控体系微观结构与界面相互作用影响力流变抛光行为。合理选择活性剂类型与浓度可在保证表面质量的同时提高加工稳定性,为YAG晶体等硬脆晶体材料抛光提供了理论依据与新的技术途径。

Abstract

Yttrium aluminum garnet (YAG) crystal is widely used in high-power laser systems, optical windows, and precision optoelectronic components due to its excellent optical transparency, thermal stability, and mechanical strength. However, as a typical high-hardness and brittle material, YAG is prone to surface micro-cracks, subsurface damage, and processing-induced defects during conventional mechanical polishing. These defects severely affect optical performance and service reliability. Force rheological polishing (FRP), which utilizes the shear-thickening effect of non-Newtonian fluids to achieve flexible and controllable material removal, has emerged as a promising ultra-precision finishing technology characterized by low damage and high surface quality. Nevertheless, the microscopic mechanism of surfactant regulation within FRP slurry and its influence on polishing performance remain insufficiently understood. In this study, the microscopic mechanisms of nonionic surfactants in FRP slurry and their effects on the polishing performance of YAG crystals were systematically investigated. Two representative nonionic surfactants with distinct hydrophilic-lipophilic balance characteristics, Tween 80 and Span 80, were selected to formulate FRP slurries at various concentrations. An orthogonal experimental design was employed to optimize key processing parameters, including surfactant system, surfactant concentration, polishing speed, and polishing angle. Verification polishing experiments were subsequently conducted to confirm the optimal parameter combination. Arithmetic mean surface roughness (Sa) and material removal rate (RMRR) were used as the primary evaluation indices. Signal-to-noise ratio analysis and range analysis were performed to quantitatively assess the relative significance of each factor and to determine the optimal process window. The results demonstrated that surfactant concentration was the most influential parameter affecting both surface roughness and RMRR, exceeding the contributions of surfactant system, polishing speed, and polishing angle. Proper adjustment of surfactant concentration significantly enhanced the stability of the shear-thickening structure within the FRP slurry, thereby improving the controllability of material removal. Under optimized processing conditions, namely 0.002 5wt.% Tween 80, polishing speed of 72 r/min, polishing angle of 77.5°, and polishing time of 60 min, a high-quality surface with an Sa value of 0.76 nm was successfully achieved, indicating effective suppression of surface defects and subsurface damage. A comparative analysis further revealed that hydrophilic surfactants, although reducing the overall RMRR relative to lipophilic surfactants, markedly improve the stability and uniformity of the removal process. This enhanced stability was attributed to the improved dispersion of abrasive particles and the strengthened interfacial adsorption between the surfactant molecules and the YAG surface, which collectively regulated the formation and breakdown of the shear-thickening network. Mechanistically, nonionic surfactants influenced the FRP behavior by modifying the microstructure of the polishing slurry and the interfacial interactions among abrasive particles, polymer matrix, and the workpiece surface. Through adsorption and steric stabilization effects, surfactant molecules regulated particle spacing, rheological response, and contact mechanics during polishing. Consequently, rational selection of surfactant system and concentration enabled a balance between removal efficiency and processing stability. Overall, this study clarifies the regulatory role of nonionic surfactants in FRP slurry and establishes an optimized parameter framework for high-precision polishing of YAG crystals. The findings provide theoretical guidance for improving the controllability and stability of force rheological polishing and offer a promising technical strategy for the ultra-precision finishing of high-hardness and brittle crystalline materials.

关键词

力流变抛光 / 非离子表面活性剂 / 表面粗糙度 / 材料去除率 / 正交试验 / 验证抛光试验

Key words

force rheological polishing / nonionic surfactant / surface roughness / material removal rate / orthogonal experiment / verification polishing experiment

引用本文

导出引用
周开耀, 王旭, 王晓荣, 宋涛, 王佳焕, 韩云晓, 王金虎, 邓乾发, 吕冰海. 非离子表面活性剂对YAG晶体力流变抛光性能的影响[J]. 表面技术. 2026, 55(21): 99-109
ZHOU Kaiyao, WANG Xu, WANG Xiaorong, SONG Tao, WANG Jiahuan, HAN Yunxiao, WANG Jinhu, DENG Qianfa, LYU Binghai. Effect of Nonionic Surfactant on Force Rheological Polishing Performance of YAG Crystal[J]. Surface Technology. 2026, 55(21): 99-109
中图分类号: TQ423.2+1    TG74   

参考文献

[1] 李鹏杰, 白雪, 刘宇阳, 等. 钇铝石榴石 (YAG) 透明陶瓷的研究进展[J]. 中国稀土学报, 2023, 41(2): 658.
LI P J, BAI X, LIU Y Y, et al.Research Progress of Yttrium Aluminum Garnet (YAG) Transparent Ceramics[J]. Journal of the Chinese Society of Rare Earths, 2023, 41(2): 658.
[2] 张自力, 金洙吉, 慕卿, 等. 钇铝石榴石晶体化学机械抛光液成分优化研究[J]. 金刚石与磨料磨具工程, 2021, 41(2): 82-88.
ZHANG Z L, JIN Z J, MU Q, et al.Optimization of CMP Solution for Yttrium Aluminum Garnet Crystal[J]. Diamond & Abrasives Engineering, 2021, 41(2): 82-88.
[3] FU Y L, LI J, LIU Y, et al.Influence of Surface Roughness on Laser-Induced Damage of Nd: YAG Transparent Ceramics[J]. Ceramics International, 2015, 41(10): 12535-12542.
[4] BELOSLUDTSEV A, MELNINKAITIS A, ABROMAVIČIUS G. Significant Enhancement in Laser Damage Resistance of YAG Crystal Surface by Plasma Etching[J]. Optics Letters, 2023, 48(9): 2226-2228.
[5] 明舜, 李军, 张羽驰, 等. 磨粒尺寸和基体硬度对固结磨料抛光YAG晶体的影响[J]. 金刚石与磨料磨具工程, 2020, 40(3): 86-90.
MING S, LI J, ZHANG Y C, et al.Effect of Abrasive Size and Matrix Hardness on Fixed Abrasive Polishing of YAG Crystal[J]. Diamond & Abrasives Engineering, 2020, 40(3): 86-90.
[6] YAO C Y, SHEN W F, HU X D, et al.Evaluation of the Surface and Subsurface Evolution of Single-Crystal Yttrium Aluminum Garnet during Polishing[J]. Applied Surface Science, 2023, 608: 155219.
[7] 马荣国, 张庆礼, 高进云, 等. YAG 晶体研磨工艺与研磨后亚表面损伤研究[J]. 硅酸盐学报, 2023, 51(3): 767-774.
MA R G, ZHANG Q L, GAO J Y, et al.Study on Grinding Process and Subsurface Damage after Grinding of YAG Crystal[J]. Journal of the Chinese Ceramic Society, 2023, 51(3): 767-774.
[8] ZENG K, WU X, JIANG F, et al.Material Removal and Surface Damage Mechanisms in Micro Drilling of Nd:YAG Material[J]. Journal of Manufacturing Processes, 2023, 90: 43-53.
[9] YIN H, WANG S, ZHAO Q L.Investigation on the Surface Topography and Surface/Subsurface Damage Mechanisms of Polycrystalline Yttrium Aluminum Garnet Ceramics in Ultra-Precision Grinding[J]. Materials Characterization, 2025, 220: 114688.
[10] 袁巨龙, 王金虎, 吕冰海, 等. 力流变抛光技术[J]. 机械工程学报, 2022, 58(15): 21-30.
YUAN J L, WANG J H, LÜ B H, et al.Force Rheological Polishing Technology[J]. Journal of Mechanical Engineering, 2022, 58(15): 21-30.
[11] HANG W, LAI Z Y, WU L W, et al.Characterization of Removal Mechanisms in LiTaO3 Single Crystals under Various Polishing Techniques: A Comparative Study Using Nanoindentation and Nanoscratch Techniques[J]. Materials Science and Engineering: B, 2025, 317: 118166.
[12] CHEN H Y, WAN H B, YANG Y J, et al.Research on High-Quality and Low-Damage Liquid Film Shearing Polishing of 4H-SiC and Its Surface/Subsurface Damage Evolution[J]. Applied Surface Science, 2026, 720: 165117.
[13] SHEN M M, LIANG Y W, MA Y, et al.Three-Step Electrochemical Shear Thickening Polishing for Damage- Free Processing of 4H-SiC Wafers[J]. Ceramics International, 2026, 52(8): 10374-10384.
[14] SHEN M M, WEI M, WU L W, et al.Dominant Parameters and Mechanisms Influencing the Electrochemical Shear-Thickening Polishing of 4H-SiC[J]. Ceramics International, 2025, 51(8): 10351-10364.
[15] FANG W, GU J J, TANG Z W, et al.Effect of Chemical Action on Shear Thickening Polishing of YAG[J]. Ceramics International, 2024, 50(16): 28775-28785.
[16] MAN Z Y, CHANG L.Shear Thickening Fluid in Surface Finishing Operations[M]. Cham: Springer, 2023: 99-114.
[17] QIAN C, TIAN Y B, FAN Z H, et al.Investigation on Rheological Characteristics of Magnetorheological Shear Thickening Fluids Mixed with Micro CBN Abrasive Particles[J]. Smart Materials and Structures, 2022, 31(9): 095004.
[18] ALAEE P, KAMKAR M, ARJMAND M.Fumed Silica- Based Suspensions for Shear Thickening Applications: A Full-Scale Rheological Study[J]. Langmuir, 2022, 38(16): 5006-5019.
[19] HUANG L B, WANG X, CHEN F Y, et al.Anhydros- Based Shear-Thickening Ultra-Precision Polishing of KDP Crystal[J]. The International Journal of Advanced Manufacturing Technology, 2023, 125(7): 3103-3115.
[20] BROWN E, JAEGER H M.Shear Thickening in Concentrated Suspensions: Phenomenology, Mechanisms and Relations to Jamming[J]. Reports on Progress in Physics, 2014, 77(4): 046602.
[21] 许宁, 林雨, 雒玉欣, 等. 高分散性CeO2抛光液的制备及其化学机械抛光性能研究[J]. 中国稀土学报, 2025, 43(6): 1292-1302.
XU N, LIN Y, LUO Y X, et al.Preparation of Highly Dispersed CeO2 Polishing Solution and Its Chemical Mechanical Polishing Properties[J]. Journal of the Chinese Society of Rare Earths, 2025, 43(6): 1292-1302.
[22] 王宣平, 郭艺敖, 彭灿, 等. 黏结性磁力抛光磨料制备及抛光性能研究[J]. 金刚石与磨料磨具工程, 2025, 45(4): 517-525.
WANG X P, GUO Y A, PENG C, et al.Research on Preparation of Adhesive Magnetic Polishing Abrasives and Polishing Performance[J]. Diamond & Abrasives Engineering, 2025, 45(4): 517-525.
[23] WANG X, SHAO X D, ZHOU K Y, et al.Study on the Effect of Dispersed Phase Particle Functional Groups on the Polishing Performance of Shear-Thickening Polishing Slurry[J]. Precision Engineering, 2025, 94: 290-302.
[24] 郜培丽, 张振宇, 王冬, 等. 绿色环保化学机械抛光液的研究进展[J]. 物理学报, 2021, 70(6): 59-73.
GAO P L, ZHANG Z Y, WANG D, et al.Research Progress of Green Chemical Mechanical Polishing Slurry[J]. Acta Physica Sinica, 2021, 70(6): 59-73.
[25] 王方圆, 宋国强, 檀柏梅, 等. 阴离子表面活性剂及复配对阻挡层抛光液性能的影响[J]. 润滑与密封, 2023, 48(12): 46-54.
WANG F Y, SONG G Q, TAN B M, et al.Effect of Anionic Surfactant and Its Compound on the Properties of Barrier Layer Slurry[J]. Lubrication Engineering, 2023, 48(12): 46-54.
[26] 李侠清, 张星, 王增敏, 等. 不同类型表面活性剂在石英表面和油/水界面吸附行为的分子动力学模拟[J]. 矿产保护与利用, 2021, 41(2): 44-51.
LI X Q, ZHANG X, WANG Z M, et al.Molecular Dynamics Simulation of Adsorption Behavior of Different Surfactants on Quartz Surface and Oil/Water Interface[J]. Conservation and Utilization of Mineral Resources, 2021, 41(2): 44-51.
[27] DENG H G, ZHONG M, XU W H.Effects and Mechanisms of Different Types of Surfactants on Sapphire Ultrasonic Polishing[J]. Tribology International, 2023, 187: 108734.
[28] XU N, LIN Y, LUO Y X, et al.Effect of Surfactants with Different Ionizing Properties on Dispersion Stability and PCMP Properties of CeO2 Nanoparticle Polishing Slurry[J]. Ceramics International, 2025, 51(1): 856-864.
[29] ZHANG L F, XIE L L, LU X C.Enhancing Ceria Slurry Performance for Shallow Trench Isolation Chemical Mechanical Polishing through Non-Ionic Surfactant Addition[J]. The International Journal of Advanced Manufacturing Technology, 2023, 128(11): 4997-5010.
[30] 李立春, 官建国, 程海斌, 等. 聚乙二醇包裹羰基铁核壳粒子的制备及水基磁流变液的性能[J]. 物理化学学报, 2005, 21(7): 817-821.
LI L C, GUAN J G, CHENG H B, et al.Preparation of Poly(ethylene glycol)-Coated Carbonyl Iron Particles for Aqueous Magnetorheological Suspension[J]. Acta Physico- chimica Sinica, 2005, 21(7): 817-821.
[31] 陈维清, 杜成斌, 万发学. 表面活性剂与触变剂对磁流变液沉降稳定性的影响[J]. 磁性材料及器件, 2010, 41(2): 55-57.
CHEN W Q, DU C B, WAN F X.Effect of Surfactant and Thixotropic Agent on the Sedimentation Stability of Magneto-Rheological Fluid[J]. Journal of Magnetic Materials and Devices, 2010, 41(2): 55-57.
[32] WU R, TIAN M C, SHU C, et al.Determination of the Critical Micelle Concentration of Surfactants Using Fluorescence Strategies[J]. Soft Matter, 2022, 18(47): 8920-8930.
[33] BĄK A, PODGÓRSKA W. Interfacial and Surface Tensions of Toluene/Water and Air/Water Systems with Nonionic Surfactants Tween 20 and Tween 80[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016, 504: 414-425.
[34] MEHTA R N, MORE U, MALEK N, et al.Study of Stability and Thermodynamic Properties of Water-in- Diesel Nanoemulsion Fuels with Nano-Al Additive[J]. Applied Nanoscience, 2015, 5(8): 891-900.
[35] 刘志飞, 王晓强, 朱其萍, 等. 超声滚挤压轴承套圈的表层性能预测模型建立及工艺参数优化[J]. 锻压技术, 2021, 46(3): 118-125.
LIU Z F, WANG X Q, ZHU Q P, et al.Establishment on Prediction Model of Surface Performance for Ultrasonic Roll Extrusion Bearing Ring and Optimization on Process Parameters[J]. Forging & Stamping Technology, 2021, 46(3): 118-125.
[36] 王斌, 邓小川, 史一飞, 等. 田口实验设计法优化碳酸锂反应结晶制备工艺[J]. 无机盐工业, 2021, 53(8): 60-65.
WANG B, DENG X C, SHI Y F, et al.Optimization of Preparation Process for Lithium Carbonate by Reactive Crystallization Based on Taguchi Experimental Design Method[J]. Inorganic Chemicals Industry, 2021, 53(08): 60-65.
[37] NGUYEN H P, PHAM V D, NGO N V.Application of TOPSIS to Taguchi Method for Multi-Characteristic Optimization of Electrical Discharge Machining with Titanium Powder Mixed into Dielectric Fluid[J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(5): 1179-1198.
[38] 张之钧, 邢攸美, 吴振, 等. Gemini表面活性剂的制备、组装及应用研究进展[J]. 应用化学, 2025, 42(5): 621-641.
ZHANG Z J, XING Y M, WU Z, et al.Research Progress in the Synthesis, Assembly and Applications of Gemini Surfactants[J]. Chinese Journal of Applied Chemistry, 2025, 42(5): 621-641.

基金

国家自然科学基金(52505528, 52575547,U24A20124); 浙江省自然科学基金(LMS25E050009)

PDF(13540 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉