t-BaTiO3@mCeO2核壳磨粒的制备及其抛光性能研究

赵鹏, 卞达, 钱善华, 倪自丰, 邱天

表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 88-98.

PDF(15593 KB)
PDF(15593 KB)
表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 88-98. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.008
精密与超精密加工

t-BaTiO3@mCeO2核壳磨粒的制备及其抛光性能研究

  • 赵鹏a, 卞达a,b,*, 钱善华a,b, 倪自丰a,b, 邱天a
作者信息 +

Preparation and Polishing Performance of t-BaTiO3@mCeO2 Core-shell Composite Abrasives

  • ZHAO Penga, BIAN Daa,b,*, QIAN Shanhuaa,b, NI Zifenga,b, QIU Tiana
Author information +
文章历史 +

摘要

目的 开发高效、环保的硅片化学机械抛光颗粒。方法 用水热法制备四方相钛酸钡,通过化学沉淀法在其表面包覆不同厚度的介孔氧化铈层,制备t-BaTiO3@mCeO2核壳结构复合磨粒,利用XRD、SEM、TEM、XPS等手段表征磨粒的晶相、微观结构与元素价态,以亚甲基蓝为探针验证抛光过程中压电效应产生活性氧的能力;以单晶硅片为抛光对象,设置c-BaTiO3、t-BaTiO3、t-BaTiO3@mCeO2-1~3及传统CeO2 + H2O2体系对照实验,通过AFM测试硅片表面粗糙度,计算材料去除率(RMRR),探究核壳磨粒的抛光性能与协同作用机理。结果 成功制备核壳结构清晰的t-BaTiO3@mCeO2复合磨粒,其中t-BaTiO3@mCeO2-2的mCeO2包覆层连续均匀(厚度在20~25 nm之间),Ce3+与氧空位含量较高;抛光压力与摩擦力可驱动t-BaTiO3产生压电效应,生成·OH、·O2‒等活性氧,实现对双氧水的替代,且活性氧可靶向氧化硅片凸起处形成软质SiO2;t-BaTiO3@mCeO2-2抛光性能最优,硅片表面RMS = 0.303 nm,平整度显著优于传统体系,RMRR也更高,自由基猝灭实验证实·OH为主要活性氧,·O2‒起辅助作用。结论 t-BaTiO3@mCeO2核壳磨粒可通过压电效应替代化学氧化剂,结合CeO2对SiO2的靶向去除作用,实现硅片的低污染、高效率抛光。

Abstract

In this work, t-BaTiO3@mCeO2 core-shell composite abrasives were innovatively designed and controllably fabricated to systematically elucidate the novel piezo-chemo-mechanical coupling targeted removal mechanism during the chemical mechanical polishing (CMP) of monocrystalline silicon wafers. By virtue of the piezocatalytic effect, oxidant-free green polishing was realized, and a series of critical research findings were obtained through systematic characterization and polishing experiments, as detailed below. First, tetragonal barium titanate (t-BaTiO3) with excellent piezoelectric activity was synthesized via a hydrothermal method as the core. After surface hydroxylation modification, mesoporous ceria (mCeO2) shells with gradient thicknesses were controllably constructed on the surface of t-BaTiO3 through a soft template-assisted chemical precipitation approach. Finally, a series of core-shell composite abrasives, namely t-BaTiO3@mCeO2-1, t-BaTiO3@mCeO2-2, and t-BaTiO3@mCeO2-3, with corresponding shell thicknesses of 10-20 nm, 20-25 nm, and 30-50 nm, were successfully prepared. The crystalline phase structure, micromorphology, elemental valence state, and pore structure characteristics of the as-prepared composite abrasives were systematically analyzed via characterization techniques including X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS). Meanwhile, comparative CMP experiments were performed on monocrystalline silicon wafers using cubic barium titanate (c-BaTiO3), pure t-BaTiO3, with the conventional CeO2+H2O2 polishing system as the control group. Combined with methylene blue degradation probe experiments, radical quenching tests (using tert-butanol to specifically scavenge hydroxyl radicals (·OH) and p-benzoquinone to specifically scavenge superoxide radicals (·O2‒), and atomic force microscopy (AFM) surface morphology characterization), the generation rule of reactive oxygen species (ROS) driven by the piezoelectric effect during polishing was clarified, the dominant active species in the polishing reaction were identified, and the synergistic polishing mechanism of the composite abrasives was revealed. The core new findings of this study were as follows: 1. The polishing pressure and interfacial shear friction during the CMP process could effectively trigger the piezoelectric effect of the t-BaTiO3 core, which spontaneously formed a built-in electric field through carrier separation and in-situ generates ROS including ·OH and ·O2‒ at the polishing interface. Meanwhile, the significant stress concentration effect at the micro-protrusions on the silicon wafer surface could further enhance the local piezocatalytic activity, achieving selective oxidation of the protruding sites on the silicon surface. This fundamentally avoided the interfacial non-selective corrosion and surface damage caused by the conventional H2O2 oxidant. 2. The t-BaTiO3@mCeO2-2 abrasive with a 20-25 nm continuous and uniform mCeO2 coating exhibited the optimal comprehensive polishing performance. The root-mean-square (RMS) surface roughness of the polished monocrystalline silicon wafer was as low as 0.303 nm, which was significantly superior to that of the conventional CeO2+H2O2 polishing system (RMS=0.425 nm). Meanwhile, the material removal rate (RMRR) of this abrasive was also remarkably higher than that of the conventional polishing system and other control abrasives. The polished silicon wafer surface presented a uniform and dense micromorphology without obvious scratches or protrusions. 3. Radical quenching experimental results confirmed that ·OH was the core active species dominating the chemical reaction in the CMP process, with a 52% decrease in RMRR after its specific quenching; ·O2‒ acted as an auxiliary active species, leading to an approximately 38% reduction in RMRR after quenching. 4. The mCeO2 shell possessed a high abundance of Ce3+ and surface oxygen vacancies, which not only provided abundant active sites for interfacial reactions and assisted the synergistic generation of reactive oxygen species (ROS), but also significantly enhanced the tribochemical reaction activity with the oxide layer on the monocrystalline silicon wafer surface. On this basis, this study elucidated the novel synergistic polishing mechanism of "piezocatalytic oxidation-targeted chemical removal" for the t-BaTiO3@mCeO2 core-shell composite abrasives. On the one hand, the piezocatalytic effect of the t-BaTiO3 core realized the complete green replacement of the conventional chemical oxidant H2O2, and the stress concentration-induced local ROS generation could targetedly oxidize the elemental silicon at the protrusions of the silicon wafer into a soft SiO2 layer, effectively avoiding non-selective surface damage caused by global oxidation. On the other hand, the mCeO2 shell on the abrasive surface could undergo a strong specific tribochemical reaction with the in-situ formed soft SiO2 layer, generating Ce—O—Si bonded products that were easily removed by mechanical grinding. Combined with the mild mechanical action of the core-shell abrasives, efficient and precise targeted removal of the oxide layer was achieved. This coupling mechanism of "piezocatalytic oxidant replacement-mesoporous CeO2 targeted removal" effectively addresses the problems of environmental pollution risk caused by chemical oxidants and non-uniform oxide layer removal in the conventional CMP process.

关键词

压电效应 / 核壳结构 / 介孔结构 / 硅片 / 抛光性能 / 环境保护型

Key words

piezoelectric effect / core-shell structure / mesoporous structure / silicon wafer / polishing performance / environmentally friendly

引用本文

导出引用
赵鹏, 卞达, 钱善华, 倪自丰, 邱天. t-BaTiO3@mCeO2核壳磨粒的制备及其抛光性能研究[J]. 表面技术. 2026, 55(21): 88-98
ZHAO Peng, BIAN Da, QIAN Shanhua, NI Zifeng, QIU Tian. Preparation and Polishing Performance of t-BaTiO3@mCeO2 Core-shell Composite Abrasives[J]. Surface Technology. 2026, 55(21): 88-98
中图分类号: TG580   

参考文献

[1] ZHAO D W, LU X C.Chemical Mechanical Polishing: Theory and Experiment[J]. Friction, 2013, 1(4): 306-326.
[2] DONG Y, LEI H, LIU W Q, et al.Preparation of Non-Spherical Silica Composite Abrasives by Lanthanum Ion-Induced Effect and Its Chemical-Mechanical Polishing Properties on Sapphire Substrates[J]. Journal of Materials Science, 2018, 53(15): 10732-10742.
[3] ZHONG Z W.Recent Advances and Applications of Abrasive Processes for Microelectronics Fabrications[J]. Microelectronics International, 2019, 36(4): 150-159.
[4] 郜培丽, 张振宇, 王冬, 等. 绿色环保化学机械抛光液的研究进展[J]. 物理学报, 2021, 70(6): 59-73.
GAO P L, ZHANG Z Y, WANG D, et al.Research Progress of Green Chemical Mechanical Polishing Slurry[J]. Acta Physica Sinica, 2021, 70(6): 59-73.
[5] 马家辉, 程洁, 陈金池, 等. 芯片化学机械抛光中磨料技术研究进展[J]. 中国表面工程, 2025, 38(5): 34-59.
MA J H, CHENG J, CHEN J C, et al.Research Progress in Abrasive Technology for the Chemical Mechanical Polishing of Chips[J]. China Surface Engineering, 2025, 38(5): 34-59.
[6] SRINIVASAN R, DANDU P V, BABU S V.Shallow Trench Isolation Chemical Mechanical Planarization: A Review[J]. ECS Journal of Solid State Science and Technology, 2015, 4(11): P5029-P5039.
[7] WANG L Y, ZHANG K L, SONG Z T, et al.Ceria Concentration Effect on Chemical Mechanical Polishing of Optical Glass[J]. Applied Surface Science, 2007, 253(11): 4951-4954.
[8] MA J H, XU N, LUO Y X, et al.Enhancing the Polishing Efficiency of CeO2 Abrasives on the SiO2 Substrates by Improving the Ce3+ Concentration on Their Surface[J]. ACS Applied Electronic Materials, 2023, 5(1): 526-536.
[9] LI J, LEI H, YANG R X.Preparation of Mesoporous CeO2@MOF-5 Abrasives for Efficient Polishing in Chemical Mechanical Polishing[J]. Materials Chemistry and Physics, 2025, 341: 130902.
[10] 许宁, 马家辉, 刘琦. CeO2基磨粒在化学机械抛光中的研究进展[J]. 中国稀土学报, 2022, 40(2): 181-193.
XU N, MA J H, LIU Q.Research Progress of CeO2-Based Abrasive Particles in Chemical Mechanical Polishing[J]. Journal of the Chinese Society of Rare Earths, 2022, 40(2): 181-193.
[11] 付东磊, 赵小杨, 娄立宇, 等. 纳米二氧化铈的制备及其在光催化领域研究进展[J]. 稀土, 2024, 45(3): 123-134.
FU D L, ZHAO X Y, LOU L Y, et al.Preparation of Nanometer Cerium Oxide and Its Research Progress in Photocatalysis[J]. Chinese Rare Earths, 2024, 45(3): 123-134.
[12] KIM E, HONG J, HONG S, et al.Improvement of Oxide Removal Rate in Chemical Mechanical Polishing by Forming Oxygen Vacancy in Ceria Abrasives via Ultraviolet Irradiation[J]. Materials Chemistry and Physics, 2021, 273: 124967.
[13] XU N, GAO K L, LIN Y, et al.Construction of Mesoporous CeO2/ZnO Composite Abrasives with Heterogeneous Structure and Application to Photochemical Mechanical Polishing (PCMP) of Quartz Glass[J]. Materials Science in Semiconductor Processing, 2025, 200: 109986.
[14] CHEN Y, ZHONG L N, CHEN A L, et al.Highly Dispersed Gd-CeO2 Nanocrystals Supported on Mesoporous Silica Composite Particles towards Photochemical (Photo- Assisted Chemical) Mechanical Polishing[J]. Ceramics International, 2023, 49(11): 16932-16943.
[15] SI H, LEE D, PARK D, et al.Size Effects of Polydopamine-Coated BaTiO3 Nanoparticles on the Piezoelectric Performance of P(VDF-TrFE)/BaTiO3 Composite[J]. Journal of Materiomics, 2024, 10(4): 857-869.
[16] LI M, SUN W J, LI Y M, et al.Piezoelectric Effect- Assisted TiO2/BaTiO3 Bicomponent for Enhanced Photocatalytic Degradation of Xanthate[J]. Ceramics International, 2025, 51(15): 20444-20451.
[17] ZHENG Y N, FENG G, CHEN C, et al.Non-Hydrolytic Sol-Gel Synthesis of BaTiO3 Nanoparticles for Piezoelectric-Enhanced Photocatalytic Degradation of Organic Pollutants[J]. Materials Science in Semiconductor Processing, 2025, 200: 109934.
[18] HU T, FENG J X, YAN W, et al.Piezocatalysis for Chemical-Mechanical Polishing of SiC: Dual Roles of t-BaTiO3 as a Piezocatalyst and an Abrasive[J]. Small, 2024, 20(21): 2310117.
[19] YI J F, WANG B X, YANG W D, et al.In-Situ ECMP Polishing of Silicon Wafers Assisted by Piezo-Electric Abrasives[J]. Materials Science in Semiconductor Processing, 2026, 205: 110341.
[20] GAO H J, YU C, ZHOU X J, et al.Double Z-Scheme BaTiO3/CeO2/TiO2 Heterojunctions for the Production of Hydrogen Peroxide[J]. Materials Science in Semiconductor Processing, 2025, 200: 109956.
[21] YE C, LI C G.Construction of BaTiO3/CeO2 Heterojunction and Comparative Study on Photocatalytic Activity of Degradation of Different Drugs[J]. Frontiers in Materials, 2023, 10: 1183819.
[22] LI X, ZHENG H J, LIU J J, et al.Piezo-Photocatalytic Properties of BaTiO3/CeO2 Nanoparticles with Heterogeneous Structure Synthesized by a Gel-Assisted Hydrothermal Method[J]. RSC Advances, 2023, 13(35): 24583-24593.
[23] 姜峰, 钱善华, 屈克松, 等. 不同粒径氧化铈磨料对K9玻璃化学机械平坦化性能的影响[J]. 中国表面工程, 2025, 38(5): 107-118.
JIANG F, QIAN S H, QU K S, et al.Effect of Cerium Oxide Abrasives with Different Particle Sizes on the Chemical Mechanical Planarization Performance of K9 Glass[J]. China Surface Engineering, 2025, 38(5): 107-118.
[24] CHEN B H, MA Y S, DING L B, et al.Reactivity of Hydroxyls and Water on a CeO2(111) Thin Film Surface: The Role of Oxygen Vacancy[J]. The Journal of Physical Chemistry C, 2013, 117(11): 5800-5810.
[25] FAN J, LI C Y, ZHAO J Z, et al.The Enhancement of Surface Reactivity on CeO2 (111) Mediated by Subsurface Oxygen Vacancies[J]. The Journal of Physical Chemistry C, 2016, 120(49): 27917-27924.
[26] 尹新城, 周宇航, 王有良, 等. BK7光学玻璃化学机械抛光机理研究[J]. 表面技术, 2026, 55(1): 43-57.
YIN X C, ZHOU Y H, WANG Y L, et al.Chemical Mechanical Polishing Mechanism for BK7 Optical Glass[J]. Surface Technology, 2026, 55(1): 43-57.
[27] 田壮智, 班新星, 巴文兰, 等. 超声辅助光催化抛光单晶碳化硅去除机理研究[J]. 中国表面工程, 2025, 38(5): 171-181.
TIAN Z Z, BAN X X, BA W L, et al.Removal Mechanism of Single-Crystal Silicon Carbide by Ultrasonic-Assisted Photocatalytic Polishing[J]. China Surface Engineering, 2025, 38(5): 171-181.
[28] COOK L M.Chemical Processes in Glass Polishing[J]. Journal of Non-Crystalline Solids, 1990, 120(1/2/3): 152-171.

基金

国家自然科学基金(52205196); 江苏省青年科技人才托举工程(JSTJ-2024-024); 江苏省自然科学基金(BK20190611); 江苏省高级访问学者计划(2024GRFX019)

PDF(15593 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉