缓蚀自修复涂层在模拟深海高压环境中的耐蚀性能研究

霍婧雅, 陈质彬, 田瑞, 王金科, 马菱薇, 张达威

表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 50-59.

PDF(9368 KB)
PDF(9368 KB)
表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 50-59. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.005
专题——能源装备功能部件表/界面技术

缓蚀自修复涂层在模拟深海高压环境中的耐蚀性能研究

  • 霍婧雅1, 陈质彬2, 田瑞1, 王金科1,*, 马菱薇1, 张达威1,*
作者信息 +

Corrosion Protection Performance of Inhibitor-loaded Self-healing Coatings under Simulated Deep-sea High Hydrostatic Pressure Environment

  • HUO Jingya1, CHEN Zhibin2, TIAN Rui1, WANG Jinke1,*, MA Lingwei1, ZHANG Dawei1,*
Author information +
文章历史 +

摘要

目的 旨在开发一种在深海高压环境下兼具优异耐腐蚀能力和自修复能力的复合涂层,以拓宽涂层在深海高压环境下的研究和应用。方法 采用一步法将3,5-二氨基-1,2,4-三氮唑(DMT)负载到SiO2中,获得负载DMT缓蚀剂的SiO2@DMT纳米填料(SiO2@DMT),并将不同含量的SiO2@DMT填料添加到环氧涂层基体中制得复合涂层。利用扫描电子显微镜、傅里叶红外光谱、紫外-可见分光光度计等多种手段对SiO2@DMT填料的形貌、结构组成及释放行为进行表征。并采用电化学阻抗谱、附着力、盐雾试验宏观光学照片等方法分析涂层在不同压力下的防护能力。结果 添加2% SiO2@DMT颗粒的复合涂层具备最佳性能,相较于纯环氧树脂涂层,2% SiO2@DMT复合涂层具有更高的附着力和低频阻抗模值。随着静水压力的升高,纯环氧涂层出现鼓泡,划伤位置腐蚀严重,而添加SiO2@DMT颗粒的复合涂层却依旧保持较好的防护效果。电化学测试结果显示,完整复合涂层在30 MPa静水压力下浸泡15 d后,其低频阻抗模值仍保持在1010 Ω·cm2以上;划伤后的复合涂层浸泡3 d后,其低频阻抗模值较纯环氧涂层高出约1个数量级,展现出优异的耐腐蚀性能。结论 环氧基体中添加SiO2@DMT纳米颗粒能够有效抑制腐蚀反应,在高压环境下依旧呈现良好的防腐蚀能力。本研究深入探究了静水压下添加缓蚀剂填料复合涂层的防护性能,为深海环境下高性能复合涂层的开发提供了实验依据和研究思路。

Abstract

Coatings have been widely employed for marine corrosion protection owing to their excellent barrier properties. Incorporating corrosion-inhibiting nanofillers has become an effective strategy for improving the long-term durability of protective coatings in deep-sea environments. The work aims to systematically investigate the effect of corrosion inhibitor-loaded SiO2 nanofillers on the corrosion protection performance of epoxy coatings under deep-sea hydrostatic pressure environment. SiO2 nanoparticles loaded with 3,5-diamino-1,2,4-triazole (DMT) were synthesized via a one-step method and incorporated into an epoxy matrix as functional fillers. The optimal filler content was determined by optimizing the filler concentration to achieve the best overall performance. The chemical structure and morphology of the SiO2@DMT nanoparticles were characterized by FT-IR and SEM, while their corrosion inhibition performance was evaluated by electrochemical measurements.
Electrochemical measurements of bare Q345 steel demonstrated that the incorporation of SiO2@DMT significantly improved its corrosion resistance under identical immersion conditions. The |Z|0.01 Hz value reached 5 424 Ω·cm2, approximately 2.8 times higher than that of the blank sample. The SiO2@DMT/epoxy composite coating was then applied onto Q345 steel substrates. Its corrosion protection performance after immersion and neutral salt spray exposure was systematically evaluated through coating degradation analysis, wet adhesion measurements, macroscopic observations, and electrochemical impedance spectroscopy (EIS). Neutral salt spray tests revealed that the incorporation of SiO2@DMT remarkably reduced the formation of corrosion products and effectively mitigated corrosion damage. Moreover, no blistering was observed on the surface of the composite coating after 15 days of immersion, even under a hydrostatic pressure of 30 MPa. Wet adhesion was evaluated via a PosiTest pull-off adhesion tester. The SiO2@DMT containing coating maintained significantly more stable interfacial adhesion under elevated hydrostatic pressure, with an adhesion strength exceeding 10 MPa even at 30 MPa, showing almost no decrease relative to that under atmospheric pressure.
For intact coatings immersed for 15 days under hydrostatic pressures up to 30 MPa, the |Z|0.01 Hz value of the composite coating remained above 1×1010 Ω·cm2 and remained essentially unchanged with the increasing pressure, whereas that of the blank coating decreased to 4.7×108 Ω·cm2. For scratched coatings, the blank coating exhibited a dramatic decline in |Z|0.01 Hz to 1×103 Ω·cm2 after only one day of immersion at 30 MPa, indicating a complete loss of corrosion protection. In contrast, the scratched composite coating consistently maintained |Z|0.01 Hz values above 1×104 Ω·cm2, demonstrating effective corrosion protection even after mechanical damage.
The results indicate that elevated hydrostatic pressure accelerates the ingress of corrosive species, including water, chloride ions, and dissolved oxygen, into the coating/metal interface, thereby weakening the wet adhesion of the coating and promoting interfacial corrosion, which ultimately accelerates coating degradation. The incorporation of SiO2@DMT nanoparticles not only enables the composite coating to maintain high interfacial adhesion under elevated hydrostatic pressure but also facilitates the gradual release of the corrosion inhibitor after coating damage, leading to the formation of a protective film that effectively suppresses further corrosion of the metal substrate. Consequently, the SiO2@DMT/epoxy composite coating exhibits outstanding long-term corrosion protection even under deep-sea high-pressure environments.

关键词

防腐涂层 / 缓蚀剂 / 深海高压 / 自修复 / 耐腐蚀

Key words

anti-corrosion coating / corrosion inhibitor / deep-sea high pressure / self-healing / corrosion resistance

引用本文

导出引用
霍婧雅, 陈质彬, 田瑞, 王金科, 马菱薇, 张达威. 缓蚀自修复涂层在模拟深海高压环境中的耐蚀性能研究[J]. 表面技术. 2026, 55(21): 50-59
HUO Jingya, CHEN Zhibin, TIAN Rui, WANG Jinke, MA Lingwei, ZHANG Dawei. Corrosion Protection Performance of Inhibitor-loaded Self-healing Coatings under Simulated Deep-sea High Hydrostatic Pressure Environment[J]. Surface Technology. 2026, 55(21): 50-59
中图分类号: TG174.4   

参考文献

[1] WU Y M, ZHAO W J, WANG L P.State of the Art and Current Trends on the Metal Corrosion and Protection Strategies in Deep Sea[J]. Journal of Materials Science & Technology, 2025, 215: 192-213.
[2] WANG A D, LIU R, GUO W M, et al.Study on the Effect of Cathodic Protection on Coating Failure under Hydrostatic Pressure[J]. Corrosion Science, 2026, 259: 113455.
[3] SABET-BOKATI K, PLUCKNETT K.Water-Induced Failure in Polymer Coatings: Mechanisms, Impacts and Mitigation Strategies: A Comprehensive Review[J]. Polymer Degradation and Stability, 2024, 230: 111058.
[4] SAVILL T, JEWELL E.Techniques for in Situ Monitoring the Performance of Organic Coatings and Their Applicability to the Pre-Finished Steel Industry: A Review[J]. Sensors, 2021, 21(19): 6334.
[5] MENG F D, LIU L, LIU E H, et al.Synergistic Effects of Fluid Flow and Hydrostatic Pressure on the Degradation of Epoxy Coating in the Simulated Deep-Sea Environment[J]. Progress in Organic Coatings, 2021, 159: 106449.
[6] LIU T, MA L W, WANG X, et al.Self-Healing Corrosion Protective Coatings Based on Micro/Nanocarriers: A Review[J]. Corrosion Communications, 2021, 1: 18-25.
[7] WEI H G, WANG Y R, GUO J, et al.Advanced Micro/Nanocapsules for Self-Healing Smart Anticorrosion Coatings[J]. Journal of Materials Chemistry A, 2015, 3(2): 469-480.
[8] 杨艳丽, 沈士泰, 郝开朗, 等. 改性CeO2/Epoxy复合涂层的抗紫外老化和防腐性能研究[J]. 表面技术, 2026, 55(12): 84-94.
YANG Y L, SHEN S T, HAO K L, et al.Ultraviolet Aging Resistance and Corrosion Protection Performance of Silane-Modified CeO2/Epoxy Composite Coatings[J]. Surface Technology, 2026, 55(12): 84-94.
[9] PHAM T H, TRAN V C, NGUYEN N T. Preparation, Controlled Release,Anticorrosion Performance of Benzotriazole-Loaded Zinc Ion-Modified Halloysite Nanotubes in Epoxy Coatings[J]. Journal of Coatings Technology and Research, 2026, 23(5): 2535-2544.
[10] XU J B, CAO Y Q, FANG L, et al.A One-Step Preparation of Inhibitor-Loaded Silica Nanocontainers for Self- Healing Coatings[J]. Corrosion Science, 2018, 140: 349-362.
[11] OLIVIERI F, CASTALDO R, COCCA M, et al.Mesoporous Silica Nanoparticles as Carriers of Active Agents for Smart Anticorrosive Organic Coatings: A Critical Review[J]. Nanoscale, 2021, 13(20): 9091-9111.
[12] ZHAO J J, NA D H, GARCIA S J.Surface Modification of Natural Porous Silica Microparticles to Control the Loading and Release of Organic Corrosion Inhibitors in Coatings[J]. NPG Asia Materials, 2025, 17: 27.
[13] LIU Y, WANG J W, LIU L, et al.Study of the Failure Mechanism of an Epoxy Coating System under High Hydrostatic Pressure[J]. Corrosion Science, 2013, 74: 59-70.
[14] KUMAR V K, KERESZTURY G, SUNDIUS T, et al.Hydrogen Bonding and Molecular Vibrations of 3,5- Diamino-1,2,4-Triazole[J]. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2005, 61(1/2): 261-267.
[15] ZHENG Z L, SCHENDERLEIN M, HUANG X, et al.Influence of Functionalization of Nanocontainers on Self-Healing Anticorrosive Coatings[J]. ACS Applied Materials & Interfaces, 2015, 7(41): 22756-22766.
[16] CAO Y, YUAN X W, WANG X, et al.Improving the Self-Healing Performance of the Water-Borne Epoxy Anticorrosion Coating in 3.5wt.% NaCl Solution Using Acid and Alkaline Dual Sensitive Organic Microspheres[J]. Progress in Organic Coatings, 2022, 167: 106815.
[17] KOOCHAKI M S, KHORASANI S N, NEISIANY R E, et al.A Highly Responsive Healing Agent for the Autonomous Repair of Anti-Corrosion Coatings on Wet Surfaces. in Operando Assessment of the Self-Healing Process[J]. Journal of Materials Science, 2021, 56(2): 1794-1813.
[18] MA L W, WANG J K, ZHANG D W, et al.Dual-Action Self-Healing Protective Coatings with Photothermal Responsive Corrosion Inhibitor Nanocontainers[J]. Chemical Engineering Journal, 2021, 404: 127118.
[19] SHEN Y, XU L K, LIU Y L, et al.Influence of AC-DC- AC Cycling with Hydrostatic Pressure on Accelerated Protective Performance Test of Glass Flake Epoxy Coating[J]. Coatings, 2023, 13(11): 1843.
[20] LIU R, LIU L, TIAN W L, et al.Finite Element Analysis of Effect of Interfacial Bubbles on Performance of Epoxy Coatings under Alternating Hydrostatic Pressure[J]. Journal of Materials Science & Technology, 2021, 64: 233-240.
[21] GAO H Y, WANG W, XU L K, et al.Degradation Behavior of a Modified Epoxy Coating in Simulated Deep-Sea Environment[J]. Journal of Chinese Society for Corrosion and Protection, 2017, 37(3): 247-263.
[22] CHEN Z B, WANG J K, MA L W, et al.Advances in Organic Coatings for Corrosion Protection in Deep-Sea Environments: Current Status, Strategies, and Future Perspectives[J]. Advances in Colloid and Interface Science, 2026, 351: 103803.
[23] GAO J, QIAN H Y, SUN X H, et al.Effect of Seawater Pressure on Protection Properties of Epoxy Coating Used in Deep Sea[J]. CIESC Journal, 2015, 66(11): 4572-4577.
[24] LIU J, LI X B, WANG J, et al.Studies of Impedance Models and Water Transport Behaviours of Epoxy Coating at Hydrostatic Pressure of Seawater[J]. Progress in Organic Coatings, 2013, 76(7/8): 1075-1081.
[25] ZEA C, BARRANCO-GARCÍA R, ALCÁNTARA J, et al. pH-Dependent Release of Environmentally Friendly Corrosion Inhibitor from Mesoporous Silica Nanoreservoirs[J]. Microporous and Mesoporous Materials, 2018, 255: 166-173.
[26] 姜丹, 黄国胜, 马力, 等. 仿生表面/涂层在金属腐蚀防护中的研究进展[J]. 表面技术, 2022, 51(6): 180-193.
JIANG D, HUANG G S, MA L, et al.Research Progress of Bionic Surface/Coating in Metal Corrosion Protection[J]. Surface Technology, 2022, 51(6): 180-193.

基金

先进材料国家科技重大专项(2024ZD0607500); 中国博士后科学基金特别资助(2026T190008); 国家资助博士后研究人员计划项目(GZC20260084)

PDF(9368 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉