烧结气氛对金属支撑SOFC阳极结构及性能影响

刘星延, 宋琛, 曾德长, 刘敏, 刘太楷, 文魁

表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 1-11.

PDF(18989 KB)
PDF(18989 KB)
表面技术 ›› 2026, Vol. 55 ›› Issue (21) : 1-11. DOI: 10.16490/j.cnki.issn.1001-3660.2026.21.001
专题——能源装备功能部件表/界面技术

烧结气氛对金属支撑SOFC阳极结构及性能影响

  • 刘星延1,2, 宋琛2,*, 曾德长1,*, 刘敏2, 刘太楷2, 文魁2
作者信息 +

Effect of Sintering Atmosphere on the Structure and Performance of Metal-supported SOFC Anodes

  • LIU Xingyan1,2, SONG Chen2,*, ZENG Dechang1,*, LIU Min2, LIU Taikai2, WEN Kui2
Author information +
文章历史 +

摘要

目的 阐明烧结气氛对金属支撑固体氧化物燃料电池(MS-SOFC)阳极微观结构与力学稳定性的调控机制,揭示其在提升大气等离子喷涂(APS)电解质成膜质量及电池输出性能方面的关键作用,为优化阳极制备工艺提供理论依据。方法 采用丝网印刷法在多孔430L不锈钢支撑体上制备NiO-氧化钇稳定氧化锆(YSZ)阳极功能层,分别于氢气与真空气氛下进行烧结,后续结合APS依次沉积电解质与阴极,组装成单电池,系统对比不同烧结气氛对阳极结构、力学性能及电池电化学性能的影响。结果 真空气氛烧结有利于形成开放的多孔阳极结构,并抑制Fe、Cr元素向阳极侧扩散,但熔融颗粒间结合较弱,纳米硬度与弹性模量分别约为1.84 GPa和45 GPa,导致电解质沉积过程中易发生剥落与裂纹。相比之下,氢气气氛烧结阳极结构更为致密,力学性能显著提升,硬度与弹性模量分别达3.88 GPa和82 GPa。基于氢气烧结阳极的电池在700 ℃下的开路电压为1.04 V,最大输出功率密度为453 mW/cm2,均高于真空烧结电池的0.956 V和418 mW/cm2。结论 优化阳极烧结气氛是实现阳极结构稳定性与APS电解质成膜质量协同提升的关键工艺因素,氢气气氛烧结在改善阳极力学性能、抑制电解质沉积缺陷以及提高电池电化学输出方面具有显著优势。

Abstract

The work aims to elucidate the regulation mechanism of sintering atmosphere on anode microstructure and mechanical stability, and to reveal its key role in improving plasma-sprayed electrolyte film quality and cell performance of metal-supported solid oxide fuel cells (MS-SOFCs). NiO-YSZ anode functional layers were screen-printed on porous 430L stainless steel substrates and sintered at 1 200 ℃ for 2 h under hydrogen or vacuum atmosphere. ScSZ electrolytes and LSCF cathodes were sequentially deposited by atmospheric plasma spraying (APS) under identical parameters. The effects of sintering atmosphere on phase evolution, microstructure, elemental diffusion, mechanical properties and electrochemical performance were systematically investigated. XRD confirmed complete reduction of NiO to metallic Ni under both atmospheres. In hydrogen atmosphere, NiO reduction occurred readily, while in vacuum, reduction was attributed to low oxygen partial pressure (approaching 10-2 Pa) and carbothermal reactions from residual organics. Hydrogen-sintered anodes exhibited significant Ni coarsening (1.0-2.2 μm) via Ostwald ripening, forming a dense and well-connected structure with nanohardness of 3.88 GPa and elastic modulus of 82 GPa. Gas permeability measurements showed a leakage rate of 3.7×10-6 cm4·gf-1·s-1. Vacuum-sintered anodes retained finer Ni particles (<1.3 μm) with a porous structure and higher gas leakage rate of 4.7×10-6 cm4·gf-1·s-1, but exhibited inferior mechanical properties (1.84 GPa, 45 GPa). EDS line scans revealed pronounced Fe and Cr diffusion in hydrogen-sintered samples (10 μm for Fe, 13 μm for Cr), attributed to disruption of the protective Cr2O3 layer under reducing atmosphere and alloying reactions at the interface. Vacuum-sintered samples showed significantly suppressed interdiffusion (7 μm for Fe, 5 μm for Cr) due to stable surface state of the metal support. The mechanical weakness of vacuum-sintered anodes led to horizontal cracking within the anode layer during APS electrolyte deposition, which propagated into the electrolyte inducing vertical cracks and compromising cell integrity. Hydrogen-sintered anodes maintained structural integrity, enabling crack-free electrolyte deposition. Electrochemical testing from 600 to 750 ℃ revealed that the hydrogen-sintered cell (Cell-H2) achieved superior open-circuit voltage of 1.04 V at 700 ℃ compared to 0.956 V for the vacuum-sintered cell (Cell-Vac). Maximum power densities at 700 ℃ were 418 mW·cm-2 for Cell-H2 and 453 mW·cm-2 for Cell-Vac. EIS analysis showed lower resistances for Cell-Vac, attributed to local heating from fuel leakage through electrolyte cracks artificially enhancing ionic conductivity of temperature-sensitive ScSZ electrolyte. This "apparent performance enhancement" occurs at the expense of fuel utilization and long-term reliability. Comparison with literature confirms Cell-H2 achieves competitive OCV but requires further electrolyte densification to improve power density toward state-of-the-art values (~750 mW·cm-2). Hydrogen sintering produces anodes with superior mechanical robustness, enabling crack-free APS electrolyte deposition and yielding cells with high OCV and sustainable performance. Vacuum sintering suppresses elemental diffusion but yields mechanically weak anodes prone to failure. The apparent power advantage of defect-containing cells originates from local heating due to fuel leakage, highlighting the critical importance of structural integrity over transient performance metrics for practical applications.

关键词

金属支撑固体氧化物燃料电池 / 烧结气氛 / 阳极 / 大气等离子喷涂 / 微观结构 / 电化学性能

Key words

metal-supported solid oxide fuel cell / sintering atmosphere / anode / atmospheric plasma spraying / microstructure / electrochemical performance

引用本文

导出引用
刘星延, 宋琛, 曾德长, 刘敏, 刘太楷, 文魁. 烧结气氛对金属支撑SOFC阳极结构及性能影响[J]. 表面技术. 2026, 55(21): 1-11
LIU Xingyan, SONG Chen, ZENG Dechang, LIU Min, LIU Taikai, WEN Kui. Effect of Sintering Atmosphere on the Structure and Performance of Metal-supported SOFC Anodes[J]. Surface Technology. 2026, 55(21): 1-11
中图分类号: TB34   

参考文献

[1] 熊少强, 杨润农, 林梓荣.“双碳”背景下固体氧化物燃料电池技术研究进展[J]. 石油与天然气化工, 2025, 54(6): 67-76.
XIONG S Q, YANG R N, LIN Z R.Research Progress of Solid Oxide Fuel Cell Technology in the Context of Dual Carbon Goals[J]. Chemical Engineering of Oil & Gas, 2025, 54(6): 67-76.
[2] 黄震, 谢晓敏, 张庭婷.“双碳”背景下我国中长期能源需求预测与转型路径研究[J]. 中国工程科学, 2022, 24(6): 8-18.
HUANG Z, XIE X M, ZHANG T T.Medium-and Long-Term Energy Demand of China and Energy Transition Pathway Toward Carbon Neutrality[J]. Strategic Study of CAE, 2022, 24(6): 8-18.
[3] GOU Y J, LI G D, REN R Z, et al.Pr-Doping Motivating the Phase Transformation of the BaFeO3-δ Perovskite as a High-Performance Solid Oxide Fuel Cell Cathode[J]. ACS Applied Materials & Interfaces, 2021, 13(17): 20174-20184.
[4] ANTUNES F C, DE OLIVEIRA J P J, DE ABREU R S, et al. Reviewing Metal Supported Solid Oxide Fuel Cells for Efficient Electricity Generation with Biofuels for Mobility[J]. Journal of Energy Chemistry, 2025, 103: 106-153.
[5] 高圆, 李智, 李甲鸿, 等. 金属支撑固体氧化物燃料电池技术进展[J]. 综合智慧能源, 2022, 44(8): 1-24.
GAO Y, LI Z, LI J H, et al.Progress in Technologies of Metal-Supported Solid Oxide Fuel Cells[J]. Integrated Intelligent Energy, 2022, 44(8): 1-24.
[6] DE OLIVEIRA J P J, ANTUNES F C, DIAS T, et al. Porous Metal Substrates for Solid Oxide Fuel Cells: Manufacturing Techniques and Future Perspectives[J]. Ceramics International, 2025, 51(9): 10951-10972.
[7] WAGHMARE A M, GAIKAR P S, CUI C L, et al.A Review of Developments and Challenges in Advanced Anode Materials for Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2026, 663: 238853.
[8] LIN J, LI H X, WANG W H, et al.Atmospheric Plasma Spraying to Fabricate Metal-Supported Solid Oxide Fuel Cells with Open-Channel Porous Metal Support[J]. Journal of the American Ceramic Society, 2023, 106(1): 68-78.
[9] HWANG C S, TSAI C H, HWANG T J, et al.Novel Metal Substrates for High Power Metal-Supported Solid Oxide Fuel Cells[J]. Fuel Cells, 2016, 16(2): 244-251.
[10] YANG Y C, CHANG T H, WU Y C, et al.Porous Ni/8YSZ Anode of SOFC Fabricated by the Plasma Sprayed Method[J]. International Journal of Hydrogen Energy, 2012, 37(18): 13746-13754.
[11] 邓春明, 肖娟, 曹家旭, 等. 等离子喷涂-物理气相沉积稀土高温功能涂层研究进展[J]. 材料研究与应用, 2019, 13(3): 247-251.
DENG C M, XIAO J, CAO J X, et al.Research Progress of PS-PVD Rare Earth High Temperature Functional Coatings[J]. Materials Research and Application, 2019, 13(3): 247-251.
[12] 朱志刚, 宋琛, 胡永俊, 等. 粉末粒径对等离子喷涂固体氧化物燃料电池阳极微观结构及性能的影响[J]. 材料研究与应用, 2023, 17(2): 329-337.
ZHU Z G, SONG C, HU Y J, et al.Effect of Powder Particle Size on Anode Microstructure and Performance for Plasma-Sprayed Solid Oxide Fuel Cell[J]. Materials Research and Application, 2023, 17(2): 329-337.
[13] GUO Y, SONG C, LIU T K, et al.Effect of Plasma Sprayed Anode Surface Structure on Metal-Supported SOFC Performance[J]. Ceramics International, 2025, 51(6): 7495-7501.
[14] THALER F, UDOMSILP D, SCHAFBAUER W, et al.Redox Stability of Metal-Supported Fuel Cells with Nickel/Gadolinium-Doped Ceria Anode[J]. Journal of Power Sources, 2019, 434: 226751.
[15] HAYDN M, ORTNER K, FRANCO T, et al.Multi-Layer Thin-Film Electrolytes for Metal Supported Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2014, 256: 52-60.
[16] KUHN J, GUPTA M, KESLER O, et al.The Effect of Fuel Electrode Roughness on the Properties of Plasma Sprayed Solid Oxide Cells[J]. Journal of the Electrochemical Society, 2018, 165(9): F693-F701.
[17] MEHRAN M T, KHAN M Z, SONG R H, et al.A Comprehensive Review on Durability Improvement of Solid Oxide Fuel Cells for Commercial Stationary Power Generation Systems[J]. Applied Energy, 2023, 352: 121864.
[18] JEANGROS Q, AEBERSOLD A B, HÉBERT C, et al. A TEM Study of Ni Interfaces Formed during Activation of SOFC Anodes in H2: Influence of Grain Boundary Symmetry and Segregation of Impurities[J]. Acta Materialia, 2016, 103: 442-447.
[19] BRANDNER M, BRAM M, FROITZHEIM J, et al.Electrically Conductive Diffusion Barrier Layers for Metal-Supported SOFC[J]. Solid State Ionics, 2008, 179(27/28/29/30/31/32): 1501-1504.
[20] TOMOV R I, KRAUZ M, TLUCZEK A, et al.Vacuum-Sintered Stainless Steel Porous Supports for Inkjet Printing of Functional SOFC Coatings[J]. Materials for Renewable and Sustainable Energy, 2015, 4(3): 14.
[21] 李冬云, 乔冠军, 金志浩. 流延法制备陶瓷薄片的研究进展[J]. 硅酸盐通报, 2004, 23(2): 44-47.
LI D Y, QIAO G J, JIN Z H.Research Development of Ceramic Slice by Tape - Casting Technique[J]. Bulletin of the Chinese Ceramic Society, 2004, 23(2): 44-47.
[22] KIM Y J, JUNG W N, YU J H, et al.Design and Analysis of SOFC Stack with Different Types of External Manifolds[J]. International Journal of Hydrogen Energy, 2020, 45(53): 29143-29154.
[23] BRANDNER M.Inhibition of Diffusion between Metallic Substratesand Ni-YSZ Anodes during Sintering[J]. ECS Proceedings Volumes, 2005, (1): 1235-1243.
[24] PIHLATIE M, KAISER A, MOGENSEN M.Mechanical Properties of NiO/Ni-YSZ Composites Depending on Temperature, Porosity and Redox Cycling[J]. Journal of the European Ceramic Society, 2009, 29(9): 1657-1664.
[25] MORALES M, ROA J J, CAPDEVILA X G, et al.Mechanical Properties at the Nanometer Scale of GDC and YSZ Used as Electrolytes for Solid Oxide Fuel Cells[J]. Acta Materialia, 2010, 58(7): 2504-2509.
[26] GARCÍA-GONZÁLEZ S, JIMÉNEZ-PIQUÉ E, ORTIZ- MEMBRADO L, et al. Mechanical and Microstructural Evolution of Ni-YSZ Electrodes in Solid Oxide Cells after Long-Term Operation: Insights from High-Speed Nanoindentation Mapping and Gaussian Mixture Model Clustering[J]. Fuel, 2026, 413: 138158.
[27] CHIODELLI G, MALAVASI L.Electrochemical Open Circuit Voltage (OCV) Characterization of SOFC Materials[J]. Ionics, 2013, 19(8): 1135-1144.
[28] SONG C, XIE S M, FAN X J, et al.Very Low-Pressure Plasma-Sprayed Dense Yttria-Stabilized Zirconia Coatings Using an Axial Bi-Cathode Plasma Torch[J]. Surface and Coatings Technology, 2020, 402: 126281.
[29] GUO Y, SONG C, LIU M, et al.Development of NiO-GDC Anode by Atmospheric Plasma Spraying for Metal-Supported SOFCs[J]. Journal of Thermal Spray Technology, 2025, 34(1): 291-299.
[30] DU K, SONG C, YUAN B, et al.Plasma-Sprayed Dense Yttria-Stabilized Zirconia Electrolyte for Metal-Supported Solid Oxide Fuel Cells[J]. Ceramics International, 2025, 51(7): 9412-9420.
[31] DU K, SONG C, YUAN B, et al.Degradation Analysis of Plasma Sprayed Metal-Supported Solid Oxide Fuel Cell: The Evolution of Electrode Processes under Polarization[J]. Journal of Power Sources, 2024, 621: 235298.
[32] ROJEK-WÖCKNER V A, OPITZ A K, BRANDNER M, et al. A Novel Ni/Ceria-Based Anode for Metal-Supported Solid Oxide Fuel Cells[J]. Journal of Power Sources, 2016, 328: 65-74.
[33] PENG Y K, SONG C, LIU M, et al.Preparation of Ni-GDC Anode for Metal-Supported Solid Oxide Fuel Cells via Suspension Plasma Spraying[J]. Ceramics International, 2026, 52(3): 3481-3490.
[34] METCALFE C, HARRIS J, KUHN J, et al.Progress in Metal-Supported Axial-Injection Plasma Sprayed Solid Oxide Fuel Cells Using Nanostructured NiO-Y0.15Zr0.85O1.925 Dry Powder Anode Feedstock[J]. Journal of Thermal Spray Technology, 2013, 22(5): 599-608.
[35] 富涛, 高九涛, 高圆, 等. 阳极微结构对等离子喷涂金属支撑SOFC的电池性能的影响研究[J]. 热喷涂技术, 2022, 14(1): 28-37.
FU T, GAO J T, GAO Y, et al.Effect of Anode Microstructure on Plasma-Sprayed Metal Supported SOFC Performance[J]. Thermal Spray Technology, 2022, 14(1): 28-37.

基金

国家重点研发计划(2023YFE0108000); 广东省科技计划项目(2023B1212060045,2023B1212120008); 广东省科学院青年人才专项(2024GDASQNRC-0208); 广东省科学院发展专项资金项目(2024GDASZH-2024010102); 广东省科学院新材料研究所专项资金项目(2023GINMZX-202301020104); 广州市基础与应用基础研究项目(2025A04J5111)

PDF(18989 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

〈 〉