目的 开发一种石墨烯在铜基复合材料中的均匀分散结构，制备出兼具高导电和强抗刻蚀性能的石墨烯/铜复合材料。方法 采用化学气相沉积原位生长法结合分散剂工艺，制备分散均匀石墨烯/铜基粉体复合材料。利用制备的石墨烯/铜粉体材料，采用真空热压工艺，制备了石墨烯/铜块体材料，然后用拉曼光谱、X射线粉末衍射仪和金相显微镜，考察石墨烯/铜试样的质量和形貌，最后用数字便携式涡流电导仪测量其电导率。利用自主设计的石墨烯/铜在过硫酸铵中刻蚀的实验装置，测试石墨烯/铜的抗刻蚀性能。结果 利用石墨烯/铜粉体制备的石墨烯/铜块体和铜具有相同的(111)、(200)和(220)晶面，多层石墨烯以立体胞室结构均匀分布在铜晶粒的晶界处。石墨烯/铜块体的导电率为96%IACS，明显优于文献报道的以其他方法制备的石墨烯/铜块体，并且在过硫酸铵溶液中浸泡90 min后，石墨烯/铜块的质量损失为126.6 mg, 石墨烯/铜比纯铜的抗刻蚀能力提高了37.6%，具有比铜更强的抗刻蚀性能。结论 以CVD原位生长法和真空热压法制 备的石墨烯/铜复合材料，石墨烯以立体胞室结构均匀分散在铜界面处，并且兼具高的导电性和强的抗刻蚀性能。

Due to the high electrical conductivity and chemical inertness, graphene has been widely incorporated into the copper matrix to form the reinforced composites. However, graphene is prone to agglomerate. In addition, uniform dispersion between graphene and copper cannot be obtained due to the differences of density. In this study, in order to fabricate high electrical conductivity and superior anticorrosion performance Graphene/copper composites, the rational design of the microstructure of graphene within the matrix is investigated. First, high-quality graphene films were grown on the surface of copper powder by thermal CVD, followed by vacuum hot-pressing to fabricate graphene/copper composites. The composites were characterized by Raman and XRD spectra, and the electrical conductivity was determined by Eddy current tester. The comparison of anticorrosion performance was carried out by measuring the weight loss of the samples as the function of etching time by self designed device. Both Copper and Graphene/Copper samples exhibit typical crystal faces (111), (200), and (220) via XRD. A cellular graphene framework was created at the grain boundary in the composites. The composites exhibit high electrical conductivity of 96%IACS, which is higher than that of reported graphene/copper composites. In addition, our graphene/copper composites also have superior corrosion resistance property against wet corrosion in copper etchant, achieving 37.6% improvement compared to the bare copper. In conclusion, we developed a facile process for the synthesis of copper matrix composites embedded with cellular graphene framework. The obtained composites have a high electrical conductivity and superior anticorrosion performance.