| WANG Hao-jie,WU San-shuan,ZHANG Ke-jie,SUN Wen,HUANG Ren-zhong,YU Min,XIE Ying-chun.Microstructure and Properties of Cold Sprayed IN718 Coating[J],51(10):361-369 |
| Microstructure and Properties of Cold Sprayed IN718 Coating |
| |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2022.10.039 |
| KeyWord:cold spray working gas IN718 coating microstructure mechanical properties |
| Author | Institution |
| WANG Hao-jie |
School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu , China;a.National Engineering Laboratory for Modern Materials Surface Engineering Technology b.The Key Lab of Guangdong for Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences, Guangzhou , China |
| WU San-shuan |
Air China South Industry Co., Ltd., Hunan Zhuzhou , China |
| ZHANG Ke-jie |
a.National Engineering Laboratory for Modern Materials Surface Engineering Technology b.The Key Lab of Guangdong for Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences, Guangzhou , China |
| SUN Wen |
a.National Engineering Laboratory for Modern Materials Surface Engineering Technology b.The Key Lab of Guangdong for Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences, Guangzhou , China |
| HUANG Ren-zhong |
a.National Engineering Laboratory for Modern Materials Surface Engineering Technology b.The Key Lab of Guangdong for Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences, Guangzhou , China |
| YU Min |
School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu , China |
| XIE Ying-chun |
a.National Engineering Laboratory for Modern Materials Surface Engineering Technology b.The Key Lab of Guangdong for Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences, Guangzhou , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Cold spray technology is an emerging additive manufacturing technology. Its low temperature and high speed characteristics enable powder particles to be deposited on the surface of the substrate in a solid form, effectively avoiding the oxidation of the coating and the thermal stress damage to the substrate. The sediment has a compact structure and excellent mechanical properties. The work aims to prepare IN718 coating by high pressure cold spray technology on the surface of Ti6Al4V substrate with different process parameters to solve the problem of poor wear resistance of Ti6Al4V, thus providing a basic theoretical basis for the preparation of high-performance IN718 coating on the surface of Ti6Al4V substrate. 100 mm×100 mm×3 mm Ti6Al4V substrate was taken as the base material and polished with sandpaper, and cleaned. Industrial IN718 powder was taken as raw material, with main components of Ni, Cr, Nb and Mo. In the cold spray process, N2 (5 MPa, 950 ℃) and He (3 MPa, 950 ℃) were used as carrier gases, the distance between the gun nozzle and the substrate was 30 mm, and the delivery rate was 100 g/min. Optical microscope (VHX-900) and field emission scanning electron microscope (GeminiSEM300) were used to observe the fracture morphology, wear morphology and cross-sectional structure of the coating. The microhardness tester (FM-700) was used to test the microhardness of the coating and the substrate, the friction and wear tester (MS-T3000) was applied to test the friction and wear, and the three-dimensional surface profiler (DEKTAK XT) was adopted to measure the wear profile and volume of the coating. Then, the friction and wear rate was calculated. The effects of different process parameters and working gas types (He/N2) on the microstructure, mechanical properties and friction and wear properties of IN718 coating were studied. The IN718 coating prepared with N2 as the propellant gas had a bonding strength of 115 MPa, a hardness of 557HV0.3, a porosity of about 0.24%, and a coating wear rate of 5.34×10–4 mm3/(N.m). The bonding strength of the IN718 coating prepared with He as the propellant gas was as high as 256 MPa, which was more than twice that of the coating prepared with N2 as the propelling gas, and the hardness was 602HV0.3, which was significantly higher than that of the coating prepared with N2 as the propellant gas. The porosity and defects of the coating were significantly reduced, the porosity test result was about 0.1%, the coating was also more wear-resistant, and the wear rate was 3.51×10–4 mm3/(N.m). Compared with the IN718 coating prepared with N2 as the propellant gas, the IN718 coating prepared with He as the working gas has denser structure, lower coating porosity, higher hardness and bonding strength and better wear resistance. Therefore, He can be used to prepare IN718 coating with better performance. Under the optimal parameters, cold spray technology can be used to prepare dense coatings with high interfacial bonding. Using He as the carrier gas to increase the deposition rate of powder particles is the main reason for improving the wear resistance of the coating. High hardness, low porosity and defects effectively reduce the occurrence of friction shedding. |
| Close |
|
|
|