FAN Chun,LONG Wei,ZHOU Xiao-ping.Influence of Al Content on Corrosion and Wear Resistance of Al-Mg2Si Composite Coatings[J],47(2):225-230
Influence of Al Content on Corrosion and Wear Resistance of Al-Mg2Si Composite Coatings
Received:August 03, 2017  Revised:February 20, 2018
View Full Text  View/Add Comment  Download reader
DOI:10.16490/j.cnki.issn.1001-3660.2018.02.035
KeyWord:AZ31B magnesium alloy  flame spraying  Al-Mg2Si composite coating  corrosion resistance  frictional wear
        
AuthorInstitution
FAN Chun Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan , China
LONG Wei Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan , China
ZHOU Xiao-ping Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan , China
Hits:
Download times:
Abstract:
      This paper aims to study the corrosion and wear of Al-Mg2Si composite coating by spraying it on AZ31B magnesium alloy surface. The corrosion resistance and wear resistance of coatings with different composition proportions were characterized by scanning electron microscopy, electrochemical testing, friction wear testing machine and ultra-depth three-dimensional Microscope. It showed that the corrosion resistance of Al-Mg2Si composite coating sealed was much higher than that of AZ31B magnesium alloy, and the less the content of Al, the more obvious the potential shift was. The positive displacement of Al (20%)-Mg2Si coating was the most, which was shifted 0.5288 V, and the corrosion current density was minimum 3.298×10−6 A/cm2. Furthermore, the less the amount of Al addition, the smaller the wear rate and friction coefficient of the coating, and the wear rate that was 2.48×10−4 mm3/(N∙mm) and friction coefficient which was 0.25 were lower when the content of Al was 20%. The less Al content of Al-Mg2Si composite coating is, the better the corrosion and wear resistance are.
Close