| YANG Guang,DENG An-zhong,CHEN Jing-bo.Effects of Nano Silica Sol Modified by KH650 on Properties of Styrene Acrylic Coating[J],46(8):49-54 |
| Effects of Nano Silica Sol Modified by KH650 on Properties of Styrene Acrylic Coating |
| Received:February 25, 2017 Revised:August 20, 2017 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.08.008 |
| KeyWord:KH560 silica sol surface modification composite coating elongation at break tensile strength |
| Author | Institution |
| YANG Guang |
Logistic Engineering University of PLA, Chongqing , China |
| DENG An-zhong |
Logistic Engineering University of PLA, Chongqing , China |
| CHEN Jing-bo |
Unit 62026 of PLA, Xi’an , China |
|
| Hits: |
| Download times: |
| Abstract: |
| The work aims to improve overall performance of silica sol-styrene acrylate composite coating and provide reference for application of organic-inorganic composite coating. Silica sol was modified with KH560 in the method of water-bath heating and mechanical stirring/ultrasonic dispersing. Samples containing 15%, 30% and 45% (mass fraction, applicable to the whole context) unmodified/modified nano silica sol-styrene acrylate composite coating were prepared by mixing unmodified/modified nano silica sol with styrene acrylate emulsion. Modification was verified to be successful by infrared spectrometer. Overall performance and microstructure of unmodified/modified silica sol-styrene acrylate composite coating were characterized with ultraviolet/visible/near-infrared spectrophotometer, mechanical property tester and scanning electron microscope. Overall performance of composite coating containing modified silica sol was significantly improved. The composite coating exhibited the best overall performance when content of modified nano silica sol was 30%. Wear loss, adhesive force, impact resistance, strength and elongation at break of the coating was 0.078 g, grade 1, 62 mm, 4.74 MPa and 205.56%, respectively, its adhesive force, impact resistance, strength and elongation at break was 1 level, 6 mm, 0.59 MPa and 10.34% higher than that of unmodified coating. Nano silica sol can be successfully modified by KH560. Overall performance of the silica sol-styrene acrylate composite coating can be improved by using modified silica sol instead of unmodified. Proper content of modified silica sol is 30% during practical application. |
| Close |
|
|
|