| REN Kun,HUANG Jing,HE Xiao-yan,YE Wei-ping,CHENG Xu-dong,FANG Dan-dan,LI Hua.Research Progress in Thermal Spray Fabrication of Titania Photocatalytic Coatings[J],44(4):66-73,83 |
| Research Progress in Thermal Spray Fabrication of Titania Photocatalytic Coatings |
| Received:November 15, 2014 Revised:April 20, 2015 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2015.04.012 |
| KeyWord:titania coating photocatalysis thermal spray anatase rutile |
| Author | Institution |
| REN Kun |
1. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan , China;2. Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo , China; |
| HUANG Jing |
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo , China |
| HE Xiao-yan |
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo , China |
| YE Wei-ping |
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan , China |
| CHENG Xu-dong |
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan , China |
| FANG Dan-dan |
Ningbo Academy of Smart City Development, Ningbo , China |
| LI Hua |
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Titania is of increasing interest due to its using sustainable sunlight to drive photocatalytic reaction and its potential application in environmental protection, health care and so forth. At present, particle-type titania catalyst has been putting into practice, but those catalyst powders servicing in liquid phase always need recycling process, which increases not only the complexity, but also the cost of equipment. Supported catalysts and coating technology could overcome the difficulty in the recycling of granular catalysts through immobilization of TiO2 on various supports. Among numerous coating preparative techniques, thermal spray has the ability to prepare large-area coating with high mechanical performance quickly and efficiently at a low cost, which shows a bright prospect in the industrialization of titanium dioxide. This paper summarized the common thermal spraying techniques, the modified liquid thermal spray and cold spray technologies used to elaborate TiO2 coatings in China and foreign countries in recent years, and discussed the influencing factors on the photocatalytic performance, such as the material phase composition, coating structure, element doping and so on. The corresponding performance improvement measures were summarized, and the existing problems of current researches on TiO2 photocatalytic caotings and future research direction were pointed out. |
| Close |
|
|
|