JIN Yue-gang,QIN Xu-feng,LI Ming.Preparation of PS and Study on the Nickel Plating Technology of PS Surface[J],42(5):81-83,92 |
Preparation of PS and Study on the Nickel Plating Technology of PS Surface |
Received:July 04, 2013 Revised:July 30, 2013 |
View Full Text View/Add Comment Download reader |
DOI: |
KeyWord:polystyrene / Ni composite chemical plating nickel plating conductivity |
Author | Institution |
JIN Yue-gang |
No. 137 Factory of China Ordnance Industry Corporation, Zhangjiakou , China |
QIN Xu-feng |
Southwest Technology and Engineering Research Institute, Chongqing , China |
LI Ming |
Southwest Technology and Engineering Research Institute, Chongqing , China |
|
Hits: |
Download times: |
Abstract: |
The PS microspheres with the smooth surface and uniform size were prepared by the dispersion polymerization technique in the presence of PVP, using 2-methylpropionitrile as initiator, anhydrous alcohol as the dispersion medium . After surface treatment, PS / Ni composite particles with characteristic of high conductivity were prepared by chemical plating process. The results show that the surface morphology and phase change of PS microspheres before and after nickel plating were studied and the effect of preparaction process on conductivity of composite was analyzed. The results show that the optimized process is: PS / NiCl2 ·6 H2O = 4 : 7 ( mass ratio) ,complexing agent dosage is 2 g, NH3 ·H2O dosage is 30 mL. |
Close |
|
|
|