SONG Qing,YU Zhao-qin,ZHANG Yong-jun,WANG Guan.Study on Etching Depth of Die Steel in Spray Etching[J],42(4):21-23 |
Study on Etching Depth of Die Steel in Spray Etching |
Received:May 26, 2013 Revised:June 27, 2013 |
View Full Text View/Add Comment Download reader |
DOI: |
KeyWord:spray etching etchant temperature spray pressure etching depth |
Author | Institution |
SONG Qing |
Institute of Mechatronics, Guangdong University of Technology, Guangzhou , China |
YU Zhao-qin |
Institute of Mechatronics, Guangdong University of Technology, Guangzhou , China |
ZHANG Yong-jun |
Institute of Mechatronics, Guangdong University of Technology, Guangzhou , China |
WANG Guan |
Institute of Mechatronics, Guangdong University of Technology, Guangzhou , China |
|
Hits: |
Download times: |
Abstract: |
Spray etching machine and FeCl3-based etchant were used to process the die steel . The influence of two independent factors, etchant temperature and spray pressure were investigated, specifically on the etching depth. The trend of etching depth was obtained with experimental analysis. Via experiments it is found that the growth rate of etching depth is increased with the rise of the etchant temperature. However, the growth rate of etching depth first increases and then decreases gradually with the increase of the spray pressure. The factors that contribute to this change of etching depth were analyzed. |
Close |
|
|
|