| WANG Han-ying,CHEN Huan-ming,SUN An,XU Jing.The Influence of Brightener on the Electroless Plating Ni-P Alloy Coatings[J],37(3):14-15,24 |
| The Influence of Brightener on the Electroless Plating Ni-P Alloy Coatings |
| Received:March 10, 2008 Revised:June 10, 2008 |
| View Full Text View/Add Comment Download reader |
| DOI： |
| KeyWord:Electroless plating Brightener Ni-P alloy Chemical plating solution Alloy coating |
| Author | Institution |
| WANG Han-ying |
1. Department of Physics & Electrical Engineering, Yulin College, Yulin , China;2. School of Physics & Electrical Information Engineering, Ningxia University, Yinchuan , China |
| CHEN Huan-ming |
School of Physics & Electrical Information Engineering, Ningxia University, Yinchuan , China |
| SUN An |
School of Physics & Electrical Information Engineering, Ningxia University, Yinchuan , China |
| XU Jing |
School of Physics & Electrical Information Engineering, Ningxia University, Yinchuan , China |
|
| Hits: |
| Download times: |
| Abstract: |
| In order to optimize the brightener in acidic electroless Ni-P plating electrolyte, the optimum composition mach ratio was determined by experiment method. The coatings macro-morphology prepared under deferent brightener also was observed and analyzed. It was indicated that the coatings with mirror-like surface and nano-meter scale grain could be obtained while adding 12mL CdS04, 12.5mL C4H602 and 23mL C12H25Na03S into the plating electrolyte. |
| Close |
|
|
|