YANG Sheng-hong,DU Ji-hong,LI Zheng-xian,HUANG Chun-liang,QIAO Ning,PAN Xiao-long,JI Shou-chang.Controls of the Coat Thickness During Continuous Electroplating Gold for Wire[J],36(1):58-59,67 |
Controls of the Coat Thickness During Continuous Electroplating Gold for Wire |
Received:November 06, 2006 Revised:February 10, 2007 |
View Full Text View/Add Comment Download reader |
DOI: |
KeyWord:Wire Continuous electroplating gold Thickness |
Author | Institution |
YANG Sheng-hong |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
DU Ji-hong |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
LI Zheng-xian |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
HUANG Chun-liang |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
QIAO Ning |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
PAN Xiao-long |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
JI Shou-chang |
Northwest Insititute for Nonferrous Materials Research, Xi’an , China |
|
Hits: |
Download times: |
Abstract: |
The influence of the component of the gold salt, the electroplating temperature and the speed rate of the wire cathode on the current efficiency were researched in order to control the thickness of the coat better. The composition of the fracture was analysed by Oxford X-Sight energy spectrometer and the patterns and the thickness of the fracture were determined by JSM-6460 scanning electronic microscope. The results of the tests indicate that the current efficiency is effected by the gold salt component little and by the electroplating temperature and the speed rate of the wire cathode heavy, and the thickness of the coat is related to the speed rate of the wire cathode only with the defined current density of the cathode while the electroplating temperature is defined. When the electroplating temperature is 45 degree centigrade, the cathode current density is 2.9 A•dm-2, the speed rate of the wire cathode is 3.2m•min-1, the thickness of the coat is 1.0μm. |
Close |
|
|
|