| ZHU Junjie,WANG Youqiang,NI Chenbing,WANG Xuezhao,LIU Dejian,FANG Yuxin,LI Mengjie.Research Progress on Microstructure and Mechanical Properties of Titanium Alloy by Laser Additive Manufacturing[J],53(1):15-32 |
| Research Progress on Microstructure and Mechanical Properties of Titanium Alloy by Laser Additive Manufacturing |
| Received:November 30, 2022 Revised:June 15, 2023 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2024.01.002 |
| KeyWord:selective laser melting laser melting deposition titanium alloy microstructure mechanical properties heat treatment |
| Author | Institution |
| ZHU Junjie |
Qingdao University of Technology, Shandong Qingdao , China |
| WANG Youqiang |
Qingdao University of Technology, Shandong Qingdao , China;Key Lab of Industrial Fluid Energy Conservation and Pollution Control, Shandong Qingdao , China |
| NI Chenbing |
Qingdao University of Technology, Shandong Qingdao , China;Key Lab of Industrial Fluid Energy Conservation and Pollution Control, Shandong Qingdao , China |
| WANG Xuezhao |
Qingdao University of Technology, Shandong Qingdao , China |
| LIU Dejian |
Qingdao University of Technology, Shandong Qingdao , China |
| FANG Yuxin |
Qingdao University of Technology, Shandong Qingdao , China |
| LI Mengjie |
Qingdao University of Technology, Shandong Qingdao , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Selective laser melting (SLM) technology and laser melting deposition (LMD) technology are becoming increasingly close to the properties of manufactured titanium alloys and forgings, which have great potential for applications in aerospace, biomedical and other fields. However, the poor surface quality, large residual stresses and the presence of internal holes in the formed Ti6Al4V alloy components affect the mechanical properties of the components, thus limiting their large-scale application. To address this situation, this work firstly outlined the manufacturing principles of selective laser melting and laser melting deposition, compared the forming parameters and characteristics of the two additive manufacturing technologies, and analyzed the advantages and applications of the two different forming technologies. Since the selective laser melting technique could adjust the thickness of the laying powder, a smaller laser spot diameter was chosen to improve the surface quality and dimensional accuracy of the formed components. The laser melting and deposition technology adopted coaxial powder feeding for faster processing and was more suitable for manufacturing medium to large metal parts. Secondly, the effects of laser power, scanning speed, laser scanning pitch, powder thickness and powder bed temperature on the forming of titanium alloys by SLM process and the effects of laser power, scanning speed and powder feeding rate on the forming of titanium alloys by LMD process were reviewed from the forming process parameters of the two additive manufacturing technologies, revealing the intrinsic effects of forming parameters, microstructure and mechanical properties in the additive manufacturing process. The direct parameters of the forming process were found to affect the degree of powder melting, fusion quality and forming microstructure, thus affecting the organization and mechanical properties of the formed parts. The effect of laser power and scanning speed on the forming process was more obvious than other factors, and there was a greater correlation between them, and a combination of lower laser power and higher scanning speed could be adopted to obtain specimens with higher microhardness. In addition, the effects of different scanning strategies on the surface quality and mechanical properties of titanium alloys formed by the two additive manufacturing techniques were reviewed, and it was found that the surface quality, residual stress and tensile strength of different regions of the same specimen surface under different scanning strategies differed significantly, and anisotropy existed between different surfaces of the specimen under the same scanning strategy. Finally, the effects of different heat treatment processes on the microstructure and mechanical properties of titanium alloys were investigated, and suitable heat treatments could reduce the stresses and regulate the phase changes and properties of formed components. Two heat treatments, annealing and solution aging, can be combined to balance the strength and plasticity of the component. To summarize the research development of these two additive manufacturing technologies, it is necessary to accelerate the establishment of a complete system of methods under the forming process and forming environment, and to promote the research on the mechanism of microstructure evolution and macro mechanical properties influence. |
| Close |
|
|
|