| YANG Qing-tian,ZHANG Yong-kang,CHI Yuan-qing,LIU Jiang-wen,WANG You,GOU Jun-feng,MO Zhao-yi,TAN Gui-bin,LI Shun-li.Effect of Laser Peening on the Microstructure and Properties of E690 Offshore Steel[J],52(11):439-447 |
| Effect of Laser Peening on the Microstructure and Properties of E690 Offshore Steel |
| Received:September 15, 2022 Revised:November 22, 2022 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2023.11.038 |
| KeyWord:laser shock peening microstructure nano-indentation coefficient of friction wear resistance wear mechanism |
| Author | Institution |
| YANG Qing-tian |
School of Electromechanical Engineering,Guangzhou , China |
| ZHANG Yong-kang |
Guangdong Provincial Key Laboratory of Advanced Manufacturing Technology for Marine Energy Facilities,Guangzhou , China |
| CHI Yuan-qing |
Guangdong Provincial Key Laboratory of Advanced Manufacturing Technology for Marine Energy Facilities,Guangzhou , China |
| LIU Jiang-wen |
School of Electromechanical Engineering,Guangzhou , China |
| WANG You |
Department of Materials Science, Harbin Institute of Technology, Harbin , China |
| GOU Jun-feng |
Guangdong Provincial Key Laboratory of Advanced Manufacturing Technology for Marine Energy Facilities,Guangzhou , China |
| MO Zhao-yi |
Department of Experimental Education, Guangdong University of Technology, Guangzhou , China |
| TAN Gui-bin |
Guangdong Provincial Key Laboratory of Advanced Manufacturing Technology for Marine Energy Facilities,Guangzhou , China |
| LI Shun-li |
Guangdong Provincial Key Laboratory of Advanced Manufacturing Technology for Marine Energy Facilities,Guangzhou , China |
|
| Hits: |
| Download times: |
| Abstract: |
| It is an advanced surface strengthening method to construct gradient structure by laser shock peening, which can improve the performances of metallic materials without changing their internal microstructure, such as fatigue strength, corrosion resistance, wear resistance and other properties. The gradient structure and residual stress have an obvious effect on the failure mechanism of the materials. The refined grain and high residual compressive stress are favorable to the improvement of mechanical properties, which affects the friction and wear behavior of the matrix. The work aims to study the microstructure, mechanical properties and wear behavior of E690 steel treated with and without LSP. The commercial E690 steel plate was cut into long squares of 75 mm×75 mm×15 mm as the base materials and polished by milling and cleaned ultrasonically. Black 3M tape was pasted on the surface of the base materials to absorb laser power. Flowing deionized water was used as confinement layer. A PROCUDO® 200 laser peening system was used to perform the LSP treatment. The spot size was 2 mm. The pulse width was 20 ns. The frequency was 5 Hz. The laser pulse energy was fixed as 6 J. Both of the overlap rates of the scanning paths along X and Y axes were 30%. The specimens used for microstructure observation were ground with sandpaper, polished with diamond polishing agent and etched with 4% natal. An optical microscope and a scanning electron microscope (SU8010) were used to observe the microstructure. The phase of the specimens was studied by an X-ray diffractometer (D8 ADVANCE). The residual stress was measured by an X-ray stress analyzer (XL-640). The mechanical properties were measured by a micro-hardness tester (HV-1000) and a nano-indenter (TI 950). The friction and wear tests were performed on a ball-on-disc tribometer (MFT-3000). The cross-sectional area of wear tracks was measured with a laser confocal microscope (OLS4100) to calculate the wear volume loss. The morphology of wear tracks was observed to reveal the wear mechanism. The superficial layer of E690 steel matrix is refined obviously to form gradient structure. The E690 steel specimens treated with and without LSP are composed of α and γ phases. The full width at half maximum of the highest peak of α phase of the specimen after LSP treatment increases from 0.218° to 0.266°. Besides, relatively large residual stress forms in the E690 steel specimen surface after LSP treatment, the highest value of which is -268 MPa. The influence depth of LSP is about 700 μm. The surface micro-hardness and Young's modulus of the E690 steel specimen after LSP treatment are 302.5±12.2HV100 and 419.80±8.79 GPa, which increase by 8.7% and 21.4% compared with those of the specimen without LSP treatment. The elastic recovery ratio of the E690 steel specimen after LSP treatment increases slightly. The coefficient of friction of the untreated and LSP treated E690 steel specimens are 0.59±0.03 and 0.55±0.03. The wear rate of the E690 steel specimen after LSP treatment decreases by 32% compared with that of the E690 steel specimen without LSP treatment. The wear mechanisms of the untreated and LSP treated specimens are adhesion wear, abrasion wear and oxidation wear. LSP treatment can improve the mechanical properties and wear resistance of E690 steel. The improved hardness, Young's modulus and high compressive stress are the important factors leading to the improvement of dry sliding wear resistance and decrease of coefficient of friction for E690 steel after LSP treatment. Besides, the lubrication role played by oxidative layer is also an important reason. |
| Close |
|
|
|