| ZHENG Jian-xin,JIN Yao-hui,LIU Chuan-shao.Numerical Study on Accelerating Characteristics of Copper Particles in Vacuum Cold Spraying Process[J],42(1):5-8 |
| Numerical Study on Accelerating Characteristics of Copper Particles in Vacuum Cold Spraying Process |
| Received:October 18, 2012 Revised:November 20, 2012 |
| View Full Text View/Add Comment Download reader |
| DOI： |
| KeyWord:vacuum cold spraying accelerating characteristics particle impact velocities gas-particle two phase flow numerical simulation |
| Author | Institution |
| ZHENG Jian-xin |
Henan Polytechnic University, Jiaozuo , China |
| JIN Yao-hui |
Henan Polytechnic University, Jiaozuo , China |
| LIU Chuan-shao |
Henan Polytechnic University, Jiaozuo , China |
|
| Hits: |
| Download times: |
| Abstract: |
| The accelerating characteristics of copper particles in the process of vacuum cold spraying were investigated based on numerical simulation of gas-particle two phase flow with Fluent, and the influences of ambient pressure, stand-off distance ( SoD) , inlet temperature and diameter of particles on particle impact velocities were analyzed. The results indicate that the ambient pressure is the key factor affecting the particle impact velocities, and the velocity curve for the small particles with diameters smaller than 1 μm is parabolic with the change of the ambient pressure, while no significant change for the big particles; The higher impact velocities may be obtained with suitable SoD; The impact velocities increase with the increment of inlet temperatures for the small particles, but which does not happen for the big particles with the same conditions; The minimumparticle size can be reduced from micron size to submicron size in the process of vacuum cold spraying, but too smaller particles cannot obtain enough high impact velocities so as to be deposited. |
| Close |
|
|
|