YAO Huai,CHANG Qing-hua,WANG Xi-ran,CHEN Yan-fang.The Effect of Temperature on the Electroless Ni-W-P Ternary Alloys Plating on the Aluminum Alloy[J],39(2):61-63 |
The Effect of Temperature on the Electroless Ni-W-P Ternary Alloys Plating on the Aluminum Alloy |
Received:November 19, 2009 Revised:April 10, 2010 |
View Full Text View/Add Comment Download reader |
DOI: |
KeyWord:Chemistry plates Ni-W-P alloy Hardness Deposition rate |
Author | Institution |
YAO Huai |
1.Henan University of Science and Technology, Luoyang , China;2.Henan Key Laboratory of Non- ferrous Metal Materials Science and Processing, Luoyang , China |
CHANG Qing-hua |
Henan University of Science and Technology, Luoyang , China |
WANG Xi-ran |
Henan University of Science and Technology, Luoyang , China |
CHEN Yan-fang |
Henan University of Science and Technology, Luoyang , China |
|
Hits: |
Download times: |
Abstract: |
In the chemical plating, the temperature of plating bathin the plating process not only affects the deposition but also has a directimpact on the component and performance of plating. The effect of temperature of plating bath on microstructure, phase composition, depositing velocity and hardness of electroless Ni-W-P plating were changed by XRD、SEM、DTA and so on. The results show that the substrate is covered of Ni-W-P plating completely, the surface is composed of uniform crystalline grains, the contents of Wis about 9.60% and no obvious defects, the diameter of grains is about 7μm, the hardness is reach to HV 610and deposition rate is 11μm/h. |
Close |
|
|
|