罗天星,周志明,黄灿,黄伟九,袁林,陈曦,李成信,谷成渝,高正军.强流脉冲电子束处理50BA钢耐腐蚀性能[J].表面技术,2017,46(6):197-201.
LUO Tian-xing,ZHOU Zhi-ming,HUANG Can,HUANG Wei-jiu,YUAN Lin,CHEN Xi,LI Cheng-xin,GU Cheng-yu,GAO Zheng-jun.Corrosion Resistance of 50BA Steel Treated with High Current Pulsed Electron Beam[J].Surface Technology,2017,46(6):197-201 |
| 强流脉冲电子束处理50BA钢耐腐蚀性能 |
| Corrosion Resistance of 50BA Steel Treated with High Current Pulsed Electron Beam |
| 投稿时间：2017-02-22 修订日期：2017-06-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.06.031 |
| 中文关键词: 强流脉冲电子束 50BA钢 耐腐蚀 表面改性 电化学腐蚀 组织 |
| 英文关键词:high current pulsed electron beam 50BA steel corrosion resistance surface modification electrochemical corrosion microstructure |
| 基金项目:国家自然科学基金（51101177）；重庆市自然科学基金（cstc201250035，2014yykfB60004)；重庆市巴南区科技项目（2015TJ08）；重庆市模具技术重点实验室开放基金（2015TD19）；江苏省高层次创新创业人才引进计划 |
| 作者 | 单位 |
| 罗天星 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.重庆市模具技术重点实验室，重庆400054 |
| 周志明 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.重庆市模具技术重点实验室，重庆400054；3.江苏祥和电子科技有限公司，江苏 徐州 221214 |
| 黄灿 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.江苏祥和电子科技有限公司，江苏 徐州 221214 |
| 黄伟九 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.重庆市模具技术重点实验室，重庆400054 |
| 袁林 | 重庆长安工业集团责任有限公司，重庆 401120 |
| 陈曦 | 重庆长安工业集团责任有限公司，重庆 401120 |
| 李成信 | 重庆长安工业集团责任有限公司，重庆 401120 |
| 谷成渝 | 重庆长安工业集团责任有限公司，重庆 401120 |
| 高正军 | 重庆长安工业集团责任有限公司，重庆 401120 |
|
| Author | Institution |
| LUO Tian-xing | 1. School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China;2.Chongqing Key Laboratory of Mould Engineering Technology, Chongqing 400054, China |
| ZHOU Zhi-ming | 1. School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China; 2.Chongqing Key Laboratory of Mould Engineering Technology, Chongqing 400054, China; 3.Jiangsu Xianghe Electronic Technology Co., Ltd, Xuzhou 221214, China |
| HUANG Can | 1. School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China;2.Jiangsu Xianghe Electronic Technology Co., Ltd, Xuzhou 221214, China |
| HUANG Wei-jiu | 1. School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China;2.Chongqing Key Laboratory of Mould Engineering Technology, Chongqing 400054, China |
| YUAN Lin | Chongqing Changan Industry (Group) Co., Ltd, Chongqing 401120, China |
| CHEN Xi | Chongqing Changan Industry (Group) Co., Ltd, Chongqing 401120, China |
| LI Cheng-xin | Chongqing Changan Industry (Group) Co., Ltd, Chongqing 401120, China |
| GU Cheng-yu | Chongqing Changan Industry (Group) Co., Ltd, Chongqing 401120, China |
| GAO Zheng-jun | Chongqing Changan Industry (Group) Co., Ltd, Chongqing 401120, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究强流脉冲电子束（HCPEB）对50BA钢表层组织和表面耐腐蚀性能的影响。方法 对50BA钢进行不同脉冲次数的表面处理，用扫描电镜观察组织变化，并在NaCl和去离子水配成的3.5%NaCl腐蚀溶液中（室温）进行动电位极化曲线测试。结果 经HCPEB处理后，50BA钢试样表层晶粒细化且产生了细小均匀分布的针状马氏体，随着脉冲次数的增加，表面趋于光滑。试样表面的自腐蚀电位从0.660 V提高到0.629 V，腐蚀电流从1.48×106 A降低到8.36×107 A。随着脉冲次数的增加，试样表面的腐蚀电流降低，腐蚀电位升高，腐蚀速率降低，腐蚀倾向性减小，其中50次脉冲处理后试样表面的耐蚀性能最好。结论 经HCPEB处理后，表层组织发生相转变，表面趋于光滑和获得的均匀细小针状马氏体从理论上解释了50BA钢耐腐蚀性能的提高。为了提高50BA钢的耐腐蚀性，应将脉冲次数控制在30次以上，且越高越好。 |
| 英文摘要: |
| The work aims to study the effects of high current pulsed electron beam (HCPEB) on microstructure and corrosion resistance of 50BA steel surface. Surface treatment was carried out to 50BA steel for different pulse times, organizational change was observed with a scanning electron microscope, and in 3.5wt% NaCl solution prepared using NaCl and deionized water (room temperature) for dynamic polarization measurement. After HCPEB treatment, grains on the surface of 50BA steel specimen were refined, and a fine and uniformly distributed acicular martensite was produced. With the increase of pulse number, the surface tended to be smooth. Self-corrosion potential of sample surface increased from 0.660 V to 0.629 V while the corrosion current decreased from 1.48×106 A to 8.36×107 A. With the increase of pulse number, the corrosion potential increased while corrosion current on the sample surface, corrosion rate and corrosion tendency decreased, the corrosion resistance of the specimen surface was best after 50 times of pulse treatment. After HCPEB treatment, the surface microstructure is subject to phase transition, the surface smoothness and presence of uniform fine acicular martensite theoretically account for corrosion resistance improvement of 50BA steel. In order to improve the corrosion resistance of 50BA steel, pulse number should be controlled over 30 times, and the higher, the better. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号