班国东,刘朝辉,叶圣天,贾艺凡,王飞,刘娜,陶睿,罗平.碳纤维复合吸波材料的频散特性影响规律研究[J].表面技术,2017,46(4):205-211.
BAN Guo-dong,LIU Zhao-hui,YE Sheng-tian,JIA Yi-fan,WANG Fei,LIU Na,TAO Rui,LUO Ping.Influence Laws of Frequency Dispersion Characteristics of Carbon Fiber Composite Absorbing Material[J].Surface Technology,2017,46(4):205-211 |
| 碳纤维复合吸波材料的频散特性影响规律研究 |
| Influence Laws of Frequency Dispersion Characteristics of Carbon Fiber Composite Absorbing Material |
| 投稿时间：2016-10-09 修订日期：2017-04-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.04.033 |
| 中文关键词: 短切碳纤维 水性聚氨酯 吸波材料 介电常数 频散特性 长度 含量 |
| 英文关键词:short carbon fibers water-based polyurethane absorbing materials dielectric constant frequency dispersion characteristics length content |
| 基金项目:全军后勤科研计划项目（BY115C007） |
| 作者 | 单位 |
| 班国东 | 中国人民解放军后勤工程学院 化学与材料工程系，重庆 401311 |
| 刘朝辉 | 中国人民解放军后勤工程学院 化学与材料工程系，重庆 401311 |
| 叶圣天 | 中国人民解放军63983部队，江苏 无锡 214000 |
| 贾艺凡 | 中国人民解放军61517部队，北京 100000 |
| 王飞 | 中国人民解放军94786部队，江西 樟树331200 |
| 刘娜 | 中国人民解放军后勤工程学院 化学与材料工程系，重庆 401311 |
| 陶睿 | 中国人民解放军后勤工程学院 化学与材料工程系，重庆 401311 |
| 罗平 | 中国人民解放军后勤工程学院 化学与材料工程系，重庆 401311 |
|
| Author | Institution |
| BAN Guo-dong | Department of Chemistry & Material Engineering, LEU, Chongqing 401311, China |
| LIU Zhao-hui | Department of Chemistry & Material Engineering, LEU, Chongqing 401311, China |
| YE Sheng-tian | Unit 62983 of PLA, Wuxi 214000, China |
| JIA Yi-fan | Unit 61517 of PLA, Beijing 100000, China |
| WANG Fei | Unit 94786 of PLA, Zhangshu 331200 |
| LIU Na | Department of Chemistry & Material Engineering, LEU, Chongqing 401311, China |
| TAO Rui | Department of Chemistry & Material Engineering, LEU, Chongqing 401311, China |
| LUO Ping | Department of Chemistry & Material Engineering, LEU, Chongqing 401311, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 归纳总结碳纤维长度和含量对碳纤维复合吸波材料（CFCAM）频散特性的影响规律。方法 以水性聚氨酯（PR）为基体树脂，碳纤维（CF）为填料，制备了不同长度和含量的CFCAM，采用扫描电镜和X射线衍射仪对CF改性前后的微观形貌和物质结构进行表征，用矢量网络分析仪测试CFCAM介电常数（ε），归纳总结出CF长度、含量对CFCAM的频散特性的影响规律。结果 随着CF长度的增大，CFCAM的ε先增大后减小，当CF长度为3 mm时，CFCAM不仅具有较好的频散特性，实部（ε′）和虚部（ε′′）都较大；随着CF含量增大，CFCAM的 增大，当CF质量分数为0.9%时，ε′达到18左右，ε′′达到9左右，预示着该含量下CFCAM有较大的储存能量的能力，并且对电磁波有较强的电损耗能力。结论 3 mm碳纤维在质量分数为0.9%时具有较好的频散特性，适宜用来制备吸波性能强、频带宽的雷达吸波涂层材料。 |
| 英文摘要: |
| The work aims to summarize law of influence of carbon fiber content and length on frequency dispersion characteristics of carbon fiber composite absorbing materials. Carbon fiber composite absorbing materials (CFCAM) of different length and content were prepared with carbon fiber (CF) with filler and water-based polyurethane resin (PR) as matrix basin. Microstructure and material structure of unmodified and modified CFCAM were characterized by means of scanning electron microscopy and X-ray diffraction analyzer. Dielectric constant of CFCAM was tested with vector network analyzer. The law of influence of CF length and content on frequency dispersion characteristics of CFCAM was summarized. ε of CFCAM first increased and then decreased as CF length increased. CFCAM with 3 mm CF not only had good frequency dispersion characteristics, but also had larger real (ε′) and imaginary (ε′′) part of dielectric constant. ε of CFCAM increased as the content of CF increased. ε′ of CFCAM was nearly 18 and imaginary part 9 at the CF mass fraction of 0.9wt.%, indicating that CFCAM had greater capability in storing energy, and had strong capability of electric loss on electromagnetic wave. 3 mm carbon fiber at the mass fraction of 0.9wt.% exhibits better frequency dispersion characteristic, hence it can be used to prepare radar absorbing materials of good absorbing property and wide frequency band. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号