陈光海,周志明,宋小放,黄伟九,汪红川,罗荣,李晓雄.强流脉冲电子束表面改性30SiMn2MoVA钢的耐磨性能[J].表面技术,2017,46(3):107-112.
CHEN Guang-hai,ZHOU Zhi-ming,SONG Xiao-fang,HUANG Wei-jiu,WANG Hong-chuan,LUO Rong,LI Xiao-xiong.Wear Resistance of 30SiMn2MoVA Steel Modified by High Current Pulsed Electron Beam[J].Surface Technology,2017,46(3):107-112 |
| 强流脉冲电子束表面改性30SiMn2MoVA钢的耐磨性能 |
| Wear Resistance of 30SiMn2MoVA Steel Modified by High Current Pulsed Electron Beam |
| 投稿时间：2016-09-09 修订日期：2017-03-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2017.03.016 |
| 中文关键词: 强流脉冲电子束 30SiMn2MoVA钢 表面改性 耐磨性 显微硬度 |
| 英文关键词:high current pulsed electron beam 30SiMn2MoVA steel surface modification wear resistance microhardness |
| 基金项目:国家自然科学基金（51101177）；重庆市科委攻关项目（cstc2014yykfB60004）；重庆市巴南区科研基金（2015TJ08）；重庆市模具技术重点实验室开放基金（2015TD19） |
| 作者 | 单位 |
| 陈光海 | 重庆理工大学 材料科学与工程学院，重庆 400054 |
| 周志明 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.重庆市精密成形集成制造产业协同创新中心，重庆 400039；3.重庆市模具技术重点实验室，重庆 400054 |
| 宋小放 | 重庆理工大学 材料科学与工程学院，重庆 400054 |
| 黄伟九 | 1.重庆理工大学 材料科学与工程学院，重庆 400054；2.重庆市精密成形集成制造产业协同创新中心，重庆 400039；3.重庆市模具技术重点实验室，重庆 400054 |
| 汪红川 | 重庆市建设工业集团有限责任公司，重庆 400054 |
| 罗荣 | 重庆市建设工业集团有限责任公司，重庆 400054 |
| 李晓雄 | 重庆国际复合材料有限公司，重庆 400084 |
|
| Author | Institution |
| CHEN Guang-hai | School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China |
| ZHOU Zhi-ming | 1.School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China; 2.Chongqing Precision Plastic Forming Integrated Manufacturing Collaborative Innovation Center, Chongqing 400039, China; 3.Chongqing Research Center for Mould Engineering Technology, Chongqing 400054, China |
| SONG Xiao-fang | School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China |
| HUANG Wei-jiu | 1.School of Material Science and Engineering, Chongqing University of Technology, Chongqing 400054, China; 2.Chongqing Precision Plastic Forming Integrated Manufacturing Collaborative Innovation Center, Chongqing 400039, China; 3.Chongqing Research Center for Mould Engineering Technology, Chongqing 400054, China |
| WANG Hong-chuan | Chongqing Jianshe Industry Co., Ltd, Chongqing 400054, China |
| LUO Rong | Chongqing Jianshe Industry Co., Ltd, Chongqing 400054, China |
| LI Xiao-xiong | Chongqing Polycomposite International Co., Ltd, Chongqing 400084, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 提高30SiMn2MoVA钢表面的耐磨性。方法 通过强流脉冲电子束技术，对30SiMn2MoVA钢表面进行不同脉冲次数的轰击处理，分析表面改性前后试样的硬度及摩擦磨损性能。结果 强流脉冲电子束处理30SiMn2MoVA钢表面晶粒细化，产生宏观残余应力使表面硬度提高。30次脉冲处理后，硬度达到最大值，相比于原始试样提高了39.6%。材料的磨损量随脉冲次数的增加而降低，表面耐磨性比原始试样提高了1倍左右，其中30次脉冲处理后，耐磨性提高最大。结论 通过强流脉冲电子束技术，提高了30SiMn2MoVA钢表面的耐磨性。 |
| 英文摘要: |
| The work aims to improve the wear resistance of 30SiMn2MoVA steel surface. The surface of 30SiMn2MoVA steel was bombarded for different pulse times by means of high current pulsed electron beam technique. The wear and microhardness of the samples were analyzed before and after surface modification. The surface microhardness increased as macroscopic residual stress was generated after grain refinement. The microhardness reached the peak and increased by 39.6% compared with that of the original sample after receiving pulses treatment for 30 times. The abrasion loss decreased with the increase of pulse times, and the surface wear resistance doubled compared with that of the original samples after being treated by high current pulsed electron beam. The wear resistance reached the peak after receiving pulses treatment for 30 times. The wear resistance of 30SiMn2MoVA steel surface increases when the high current pulsed electron beam technique is applied. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号