段永锋,于凤昌,崔新安,孙亮,侯艳宏.炼化设备冲刷腐蚀失效分析及控制策略[J].表面技术,2016,45(10):173-179.
DUAN Yong-feng,YU Feng-chang,CUI Xin-an,SUN Liang,HOU Yan-Hong.Failure Analysis and Controlling Strategy on Erosion-Corrosion of Petrochemical Equipment[J].Surface Technology,2016,45(10):173-179 |
| 炼化设备冲刷腐蚀失效分析及控制策略 |
| Failure Analysis and Controlling Strategy on Erosion-Corrosion of Petrochemical Equipment |
| 投稿时间：2016-03-26 修订日期：2016-10-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2016.10.027 |
| 中文关键词: 炼化设备 冲刷腐蚀 环烷酸腐蚀 酸性水腐蚀 失效分析 控制措施 |
| 英文关键词:petrolchemical equipment erosion-corrosion naphthenic acid corrosion sour water corrosion failure analysis control strategies |
| 基金项目:中国石化科研项目（313070）；中海油炼化公司项目（LH00FW 2013-1094） |
| 作者 | 单位 |
| 段永锋 | 中石化炼化工程集团洛阳技术研发中心，河南 洛阳 471003 |
| 于凤昌 | 中石化炼化工程集团洛阳技术研发中心，河南 洛阳 471003 |
| 崔新安 | 中石化炼化工程集团洛阳技术研发中心，河南 洛阳 471003 |
| 孙亮 | 中海石油炼化有限责任公司惠州炼化分公司，广东 惠州 516086 |
| 侯艳宏 | 中海石油炼化有限责任公司惠州炼化分公司，广东 惠州 516086 |
|
| Author | Institution |
| DUAN Yong-feng | Luoyang R&D Center of Technology of Sinopec Engineering Co., Ltd, Luoyang 471003, China |
| YU Feng-chang | Luoyang R&D Center of Technology of Sinopec Engineering Co., Ltd, Luoyang 471003, China |
| CUI Xin-an | Luoyang R&D Center of Technology of Sinopec Engineering Co., Ltd, Luoyang 471003, China |
| SUN Liang | CNOOC Huizhou Refining & Chemical Company, Huizhou 516086, China |
| HOU Yan-Hong | CNOOC Huizhou Refining & Chemical Company, Huizhou 516086, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 冲刷腐蚀失效是制约炼油装置安全运行的重大隐患，通过分析炼化设备系统中典型冲刷腐蚀失效的机理和影响因素，提出石油炼制过程中冲刷腐蚀的控制策略。方法 基于炼油装置的工艺流程、设备和管道的结构设计、腐蚀介质和材质等，分别针对减压转油线防冲板、硫酸烷基化装置反应流出物注碱口管线、酸性水汽提塔顶富氨气系统，以及焦化分馏塔进料段塔壁腐蚀问题进行失效分析。结果 通过将材质升级为317L，避免了减压转油线防冲板因环烷酸冲刷腐蚀而减薄。通过改进碱注入方式和优化操作工艺方式，减缓了硫酸烷基化装置反应流出物注碱口管线的硫酸腐蚀。通过将空冷器管束材质升级为316L，及增加管道直径的措施，防治了酸性水汽提塔顶富氨气系统酸性水冲刷腐蚀。通过更换进料分配器解决了焦化分馏塔进料段塔壁腐蚀泄漏的难题。结论 炼化设备冲刷腐蚀的控制策略：依据主动防腐的观念，在遵循炼化设备选材导则进行合理选材的基础上，充分考虑设备、管道的实际工艺操作情况，针对具体部位进行腐蚀评估，发现薄弱部位并及时调整相关操作（操作工艺、工艺防腐和腐蚀监测等），从而保证了炼化装置的安全稳定运行。 |
| 英文摘要: |
| The work aims to put forward the strategies to control the erosion and corrosion in the process of petroleum refining by analyzing the mechanism and influence factors of typical corrosion-erosion failures in refining equipment and system as the said failures are main potential troubles to the safe and stable operation of the refining units. Based on technological process of oil refining equipment, structural design of equipment and pipes, corrosive medium and materials, etc., the corrosion failures of impingement baffle in vacuum transfer line, reactor effluent pipeline at injection inlet of sulfuric acid alkylation unit, rich ammonium system in the top of sour water stripping tower, and tower wall in feeding zone of coking fractional column were respectively analyzed. The thinning of impingement baffle in vacuum transfer line eroded and corroded by naphthenic acid corrosion was avoided by the material upgraded to 317L. The sour water corrosion in rich ammonium system in the top of sour water stripping tower was prevented by the material upgraded to 316L and increasing the diameter of pipeline. The corrosion and leakage problem of tower wall in feeding zone of coking fractional column was solved by replacing the feeding distributor. The strategies to control the corrosion-erosion of the refining equipment: based on the concept of active anti-corrosion and selecting material by following the material selection guidelines, the possibility of corrosion in specific region should be evaluated by fully taking into account the actual technological operations of the equipment and pipelines. Once the major corrosion regions are found, relevant operation should be timely adjusted (operation processes, process anti-corrosion and corrosion monitoring, etc.), so as to ensure the safe and stable operation of the refining device. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号