贾卫平,姚井龙,吴蒙华,吴敬明,王邦国.激光重熔参数对镍基纳米TiN复合电沉积镀层性能的影响研究[J].表面技术,2016,45(3):78-83.
JIA Wei-ping,YAO Jing-long,WU Meng-hua,WU Jing-ming,WANG Bang-guo.Effect of Laser Remelting Parameters on Properties of Nickel-based Nano TiN Composite Deposition Coatings[J].Surface Technology,2016,45(3):78-83 |
| 激光重熔参数对镍基纳米TiN复合电沉积镀层性能的影响研究 |
| Effect of Laser Remelting Parameters on Properties of Nickel-based Nano TiN Composite Deposition Coatings |
| 投稿时间：2015-09-18 修订日期：2016-03-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2016.03.013 |
| 中文关键词: NiCr20TiAl 纳米TiN镀层 激光重熔 工艺参数 性能优化 研究 |
| 英文关键词:laser remelting nano TiN layer process parameters remelted layer performance optimization research |
| 基金项目:辽宁省教育厅重点实验室项目(L2012437) |
| 作者 | 单位 |
| 贾卫平 | 1. 大连大学 特种加工与功能材料制备辽宁省教育厅重点实验室, 辽宁 大连 116622;2. 大连大学 机械工程学院, 辽宁 大连 116622 |
| 姚井龙 | 大连大学 机械工程学院, 辽宁 大连 116622 |
| 吴蒙华 | 1. 大连大学 特种加工与功能材料制备辽宁省教育厅重点实验室, 辽宁 大连 116622;2. 大连大学 机械工程学院, 辽宁 大连 116622 |
| 吴敬明 | 大连大学 机械工程学院, 辽宁 大连 116622 |
| 王邦国 | 1. 大连大学 特种加工与功能材料制备辽宁省教育厅重点实验室, 辽宁 大连 116622;2. 大连大学 机械工程学院, 辽宁 大连 116622 |
|
| Author | Institution |
| JIA Wei-ping | 1. Key Laboratory for Non-traditional & Functional Materials Preparation of Education Department Liaoning Province,Dalian University, Dalian 116622, China; 2. Mechanical Engineering College, Dalian Univeristy, Dalian 116622, China |
| YAO Jing-long | Mechanical Engineering College, Dalian Univeristy, Dalian 116622, China |
| WU Meng-hua | 1. Key Laboratory for Non-traditional & Functional Materials Preparation of Education Department Liaoning Province,Dalian University, Dalian 116622, China; 2. Mechanical Engineering College, Dalian Univeristy, Dalian 116622, China |
| WU Jing-ming | Mechanical Engineering College, Dalian Univeristy, Dalian 116622, China |
| WANG Bang-guo | 1. Key Laboratory for Non-traditional & Functional Materials Preparation of Education Department Liaoning Province,Dalian University, Dalian 116622, China; 2. Mechanical Engineering College, Dalian Univeristy, Dalian 116622, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 在NiCr20TiAl基体材料上进行镍基纳米TiN电沉积复合镀后再开展激光重熔工艺，研究激光重熔参数对其镀层表面质量、结合力及硬度的影响。方法 采用正交实验，研究不同激光重熔参数（扫描速率、搭接量、离焦量等）对重熔镀层的影响，采用显微硬度计、扫描电镜和划痕仪进行硬度、表面形貌和结合力检测，得到较优工艺参数。结果 通过控制重熔参数对镀层表面能量和表面形貌的影响，以降低表面性能差异，得到激光重熔较佳工艺参数为：电流115A，脉宽为8ms，频率为10Hz，离焦量15mm，扫描速度230mm/min，使获得的镀层表面形貌比较平整，结合力提高到＞60N，硬度值平均632HV，并且硬度分布均匀。结论 激光重熔工艺可消除纳米复合电沉积过程中产生的间隙，纳米复合镀层致密均匀，镀层与基体之间产生良好的冶金结合，镀层表面硬度分布均匀，机械性能趋近一致。 |
| 英文摘要: |
| Objective Nickel-based nano TiN composite deposition layers were remelted by laser process.The effects of laser remeltign parameters on the surface quality, binding force and hardness were researched. Method Orthogonal experiments that different laser remelting parameters(scan rate,amout of overlap,defocus amount,etc) were applied and influences were analysed on the remelted coating to obtain optimum process parameters by using microhardness, SEM and scratch tester to detect hardness, surface morphology and binding force.Result By controlling the remelting parameters on the coating surface energy and surface topography in order to reduce the differences in surface properties, preferably laser remelting process parameters were electric current 115A,pulse width of 8ms,frequency of 10Hz,dofocus amount 15mm,and the scanning speed of 230mm/min to obtain smooth surface topography, binding force up to ＞60N, the average hardness values 632HV, and hardness distribute uniform.Conclusion Laser remelting process can eliminate the gap produced by nano composite deposition, and nano composite layer become compact and uniform. A good metallurgical bond can be formed between the layer and substrate, the layer surface hardness distributed uniform and the mechanical properties approach consistent. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号