韩宝军,何琼,杨妙.机械研磨工艺对 AZ91D 镁合金显微结构的影响[J].表面技术,2015,44(2):78-82.
HAN Bao-jun,HE Qiong,YANG Miao.Effects of Surface Mechanical Attrition Treatment Technique on Microstructure of AZ91D Magnesium Alloys[J].Surface Technology,2015,44(2):78-82 |
| 机械研磨工艺对 AZ91D 镁合金显微结构的影响 |
| Effects of Surface Mechanical Attrition Treatment Technique on Microstructure of AZ91D Magnesium Alloys |
| 投稿时间：2014-08-07 修订日期：2015-02-20 |
| DOI：10.16490/j.cnki.issn.1001-3660.2015.02.015 |
| 中文关键词: AZ91D 镁合金 表面机械研磨 晶粒细化 |
| 英文关键词:AZ91D magnesium alloys surface mechanical attrition treatment grain refinement |
| 基金项目:教育部科技重点项目(212093);江西省自然科学基金项目(20114BAB216013) |
| 作者 | 单位 |
| 韩宝军 | 1. 赣南师范学院 化学化工学院, 江西 赣州 341000;2. 赣南师范学院 江西省镁合金材料工程技术研究中心, 江西 赣州 341000 |
| 何琼 | 1. 赣南师范学院 化学化工学院, 江西 赣州 341000;2. 赣南师范学院 江西省镁合金材料工程技术研究中心, 江西 赣州 341000 |
| 杨妙 | 1. 赣南师范学院 化学化工学院, 江西 赣州 341000;2. 赣南师范学院 江西省镁合金材料工程技术研究中心, 江西 赣州 341000 |
|
| Author | Institution |
| HAN Bao-jun | 1. School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou 341000, China;2. Jiangxi Provincial Engineering Research Center for Magnesium Alloys, Gannan Normal University, Ganzhou 341000, China |
| HE Qiong | 1. School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou 341000, China;2. Jiangxi Provincial Engineering Research Center for Magnesium Alloys, Gannan Normal University, Ganzhou 341000, China |
| YANG Miao | 1. School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou 341000, China;2. Jiangxi Provincial Engineering Research Center for Magnesium Alloys, Gannan Normal University, Ganzhou 341000, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究不同机械研磨处理条件对 AZ91D 镁合金表面晶粒细化行为与机制的影响。 方法采用不同直径的弹丸对密排六方结构的 AZ91D 镁合金进行不同时间的表面机械研磨处理,对处理试样的表面显微结构进行对比和表征,分析晶粒细化机制。 结果 通过表面机械研磨处理可以实现 AZ91D镁合金的表层晶粒细化。 在一定范围内,弹丸直径越大,处理时间越长,表层晶粒细化就越明显,晶粒尺寸可细化至约 24 nm。 结论 AZ91D 镁合金表面机械研磨处理晶粒细化是孪生和位错滑移的综合结果。选择弹丸直径 16 mm,处理时间 180 min 的工艺参数,AZ91D 镁合金表面机械研磨处理的效果最好。 |
| 英文摘要: |
| Objective To investigate the influence of surface mechanical attrition treatment technique on the grain refinement behavior and mechanism of AZ91D magnesium alloys. Methods The AZ91D magnesium alloy in hexagonal-closet-packet structure was treated by surface mechanical attrition treatment (SMAT) with different ball diameters and handling time, and the microstructure of surface deformed layer was characterized and compared. Results The grain of AZ91D magnesium alloys was obviously refined by surface mechanical attrition treatment. In a certain range, as the balls diameter or handling time increased, the grain size became smaller, and could finally reach about 24 nm. Conclusion The grain refinement mechanism of AZ91D magnesium alloy by surface mechanical attrition treatment was the results of twinning and dislocation slip. When the diameter of balls was 16 mm and the handling time was 180 min, surface mechanical attrition treatment has the highest efficiency. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号