张哲,严刚,倪福松,贾明子.Al2O3纳米粒子环氧涂层对钢筋防护性能的电化学噪声分析[J].表面技术,2014,43(2):18-23,54.
ZHANG Zhe,YAN Gang,NI Fu-song,JIA Ming-zi.Electrochemical Noise Analysis for Evaluating the Protection Properties of Al2O3 Nanoparticles Epoxy Coating for Steel Bar[J].Surface Technology,2014,43(2):18-23,54 |
| Al2O3纳米粒子环氧涂层对钢筋防护性能的电化学噪声分析 |
| Electrochemical Noise Analysis for Evaluating the Protection Properties of Al2O3 Nanoparticles Epoxy Coating for Steel Bar |
| 投稿时间：2013-10-25 修订日期：2013-12-26 |
| DOI： |
| 中文关键词: Al2O3 纳米粒子 环氧涂层 钢筋 电化学噪声 交流阻抗谱 |
| 英文关键词:Al2O3 nanoparticles epoxy coating steel bar electrochemical noise electrochemical impedance spectroscopy |
| 基金项目:广西自然科学基金(2013GXNSFBA019248) ;广西建筑工程检测与试验重点实验室开放基金(12-KF-03) |
|
|
| Author | Institution |
| ZHANG Zhe | Guangxi Key Laboratory of Geomechanics and Geotechnical Engineering; Guilin 541004, China;College of Chemistry and Bioengineering, Guilin University of Technology, Guilin 541004, China |
| YAN Gang | College of Chemistry and Bioengineering, Guilin University of Technology, Guilin 541004, China |
| NI Fu-song | College of Chemistry and Bioengineering, Guilin University of Technology, Guilin 541004, China |
| JIA Ming-zi | College of Chemistry and Bioengineering, Guilin University of Technology, Guilin 541004, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究 Al2O3 纳米粒子环氧复合涂层对钢筋的防护性能。 方法 制备 Al2O3 纳米粒子,将其添加至环氧涂料中,并涂覆在工业钢筋表面成膜。 通过 XRD 和 SEM 对 Al2O3 进行表征;利用电化学噪声、交流阻抗谱分析技术,对复合涂层在 3 . 5% ( 质量分数) NaCl 介质中对工业钢筋的防护性能进行测试分析。 结果 制备的氧化铝纳米粒子的粒径平均为 75 nm。 通过对电化学噪声测试的有效数据进行时域和频域分析,通过交流阻抗谱分析及数据拟合,认为 Al2O3 纳米粒子添加量为 0 . 1% ( 以占环氧树脂质量的百分比计) 时,涂层对钢筋的防护性能最好。 结论 向环氧涂层中添加适量的 Al2O3 纳米粒子,可以明显提升其对钢筋的防护性能。 |
| 英文摘要: |
| Objective To study the protective performance of Al2O3 nanoparticles epoxy composite coating of steel. Methods The Al2O3 nanoparticles were prepared, and then added into the epoxy coating, coated on the steel as a film. The Al2O3 nanoparticles were characterized by XRD and SEM. The anti-corrosive properties of the composite coatings in the solution of 3. 5% NaCl were evaluated by electrochemical noise and electrochemical impedance spectroscopy. Results The average size of Al2O3 nanoparticles was 75 nm. Based on the time and frequency domains analysis of electrochemical noise data, the analysis of electrochemical impedance spectroscopy and data fitting, it was found that the composite coating with 0. 1% Al2O3 nanoparticles ( as a percentage in the weight of epoxy resin) had the best protective performance on steel. Conclusion The epoxy coating supplemented with a suitable amount of Al2O3nanoparticles showed significantly improved protective performance on steel. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号