周静,陈汉宾,张隆平.瓷罗拉等离子喷涂防静电耐磨损涂层工艺[J].表面技术,2013,42(6):66-68,100.
ZHOU Jing,CHEN Han-bin,ZHANG Long-ping.Technology Investigation of Antistatic and Anti-abrasive Coatings Prepared by Plasma Spray on Porcelain Roller[J].Surface Technology,2013,42(6):66-68,100 |
| 瓷罗拉等离子喷涂防静电耐磨损涂层工艺 |
| Technology Investigation of Antistatic and Anti-abrasive Coatings Prepared by Plasma Spray on Porcelain Roller |
| 投稿时间：2013-07-04 修订日期：2013-08-17 |
| DOI： |
| 中文关键词: 瓷罗拉 等离子喷涂 防静电 耐磨损 涂层 |
| 英文关键词:porcelain roller plasma spray antistatic anti-abrasive coating |
| 基金项目: |
| 作者 | 单位 |
| 周静 | 重庆理工大学, 重庆 400050 |
| 陈汉宾 | 西南技术工程研究所, 重庆 400039 |
| 张隆平 | 西南技术工程研究所, 重庆 400039 |
|
| Author | Institution |
| ZHOU Jing | Chongqing University of Technology, Chongqing 400050, China |
| CHEN Han-bin | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
| ZHANG Long-ping | Southwest Technology and Engineering Research Institute, Chongqing 400039, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 提高纺织行业瓷罗拉转动轴的防静电和耐磨损性能。 方法 采用等离子喷涂技术,在瓷罗拉表面先喷涂 Ni 包 Al 过渡层,再喷涂 Al2O3-TiO2 陶瓷层,获得防静电耐磨复合涂层,并优化等离子喷涂工艺。 结果 获得了优化的等离子喷涂工艺,在后续的磨削加工中,宜选用碳化硅砂轮。 结论 制备的防静电耐磨涂层性能较好,在瓷罗拉上得到了成功应用。 |
| 英文摘要: |
| Objective To improve the antistatic and anti-abrasive properties of the porcelain rollers in the textile industry. Methods The antistatic and anti-abrasive composite coatings were prepared by plasma spray. Ni package Al was the transition layer, and the Al2O3-TiO2ceramic coatings was the surface layer. The plasma spray processing parameters were optimized by experiments. Results The optimized process of plasma spraying was obtained. The silicon carbide grinding wheel was suitable for the following abrasive machining. Conclusion Plasma spraying is one of the valid ways to prepare the anti electrostatic coatings for rollers. Rollers with antistatic and anti-abrasive coating prepared by plasma spray were successfully applied. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号