钟佩文,方亮,胡佳,杨有利.铝合金表面化学镀 Ni-Co-P / SiC 复合镀层的组织与性能研究[J].表面技术,2013,42(4):47-51. ZHONG Pei-wen,FANG Liang,HU Jia,YANG You-li.Study on the Microstructure and Properties of Electroless Ni-Co-P / SiC Composite Coatings on Al Alloys[J].Surface Technology,2013,42(4):47-51 |
铝合金表面化学镀 Ni-Co-P / SiC 复合镀层的组织与性能研究 |
Study on the Microstructure and Properties of Electroless Ni-Co-P / SiC Composite Coatings on Al Alloys |
投稿时间:2013-02-28 修订日期:2013-03-19 |
DOI: |
中文关键词: 化学复合镀 SiC 纳米微粒 Ni-Co-P / SiC 复合镀层 硬度 耐腐蚀性 |
英文关键词:electroless composite plating SiC nano particles Ni-Co-P / SiC composite coatings hardness corrosion resistance |
基金项目:重庆市科技攻关项目( CSTC-2010AC6072) |
作者 | 单位 |
钟佩文 | 重庆大学 应用物理系, 重庆 400030 |
方亮 | 重庆大学 应用物理系, 重庆 400030 |
胡佳 | 重庆大学 应用物理系, 重庆 400030 |
杨有利 | 重庆大学 应用物理系, 重庆 400030重庆理工大学 材料科学与工程学院, 重庆 400050 |
|
Author | Institution |
ZHONG Pei-wen | Department of Applied Physics, Chongqing University, Chongqing 400030 , China |
FANG Liang | Department of Applied Physics, Chongqing University, Chongqing 400030 , China |
HU Jia | Department of Applied Physics, Chongqing University, Chongqing 400030 , China |
YANG You-li | College of Material Sci. and Eng. , Chongqing University of Technology, Chongqing 400050 , China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
通过化学镀的方法,在铝合金表面成功地制备了 Ni-Co-P / SiC 复合镀层。 对复合镀层的表面形貌、化学成分、晶态结构、硬度进行了表征分析,通过电化学测试对其耐腐蚀性进行了研究。 结果表明:SiC 纳米微粒起到了提高 Ni-Co-P 合金镀层硬度的作用,向镀液中加入 12 g / L SiC 纳米微粒时,复合镀层的硬度达到最大值524 HV;Ni-Co-P / SiC 复合镀层能增强铝合金材料的耐蚀性能,镀液中 SiC 微粒的质量浓度为 9 g / L 时,复合镀层的耐腐蚀性相对最好。 |
英文摘要: |
Ni-Co-P / SiC composite coatings on Al alloys were prepared successfully by electroless plating technique.The surface morphologies, chemical composition, crystal structure, hardness of composite coatings were characterized and analyzed, whose corrosion resistance was investigated by electrochemical measurement . The results demonstrated that SiC nano particles can improve the hardness of Ni-Co-P alloy coating. Adding 12 g / L SiC nano particles into plating bath, the hardness of composite coatings may attain a maximum of 524 HV. In addition, Ni-Co-P / SiC composite coatings can also enhance the corrosion resistance of Al alloy materials. When SiC particle concentration is 9 g / L in plating bath, the corrosion resistance of composite coatings may be best relatively. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|