王兆华,杨瑞嵩,孙晓明,刘元洪.钢铁磷化后置换镀铜封闭的研究[J].表面技术,2013,42(1):98-100. WANG Zhao-hua,YANG Rui-song,SUN Xiao-ming,LIU Yuan-hong.The Research on the Phosphating Film Closed by Copper with Replacement Plating[J].Surface Technology,2013,42(1):98-100 |
钢铁磷化后置换镀铜封闭的研究 |
The Research on the Phosphating Film Closed by Copper with Replacement Plating |
投稿时间:2012-09-21 修订日期:2012-11-15 |
DOI: |
中文关键词: 磷化膜 置换镀铜 封闭 |
英文关键词:phosphating film replacement plating copper close |
基金项目:材料腐蚀与防护四川省重点实验室开放基金(2011CL14) ;四川理工学院人才引进项目(2009xjkRL008) |
作者 | 单位 |
王兆华 | 四川理工学院 材料腐蚀与防护四川省重点实验室, 自贡 643000 |
杨瑞嵩 | 四川理工学院 材料腐蚀与防护四川省重点实验室, 自贡 643000 |
孙晓明 | 四川理工学院 材料腐蚀与防护四川省重点实验室, 自贡 643000 |
刘元洪 | 四川科宏石油天然气工程有限公司, 成都 610213 |
|
Author | Institution |
WANG Zhao-hua | Material Corrosion and Protection Key Laboratory of Sichuan Province, Sichuan University of Science and Engineering, Zigong 643000 , China |
YANG Rui-song | Material Corrosion and Protection Key Laboratory of Sichuan Province, Sichuan University of Science and Engineering, Zigong 643000 , China |
SUN Xiao-ming | Material Corrosion and Protection Key Laboratory of Sichuan Province, Sichuan University of Science and Engineering, Zigong 643000 , China |
LIU Yuan-hong | Sichuan Kehone Oil & Gas Enginering Co. , Ltd. , Chengdu 610213 , China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
采用硫酸铜溶液对湿态磷化膜进行置换镀铜封孔,发现该方法是可行的。 铜封闭操作可以增加磷化膜的厚度,提高其耐蚀性能,减轻后续水洗的强度。 置换时间宜短,硫酸铜溶液浓度宜低,推荐的置换镀铜封闭磷化膜工艺是:采用浓度 2% 的硫酸铜溶液,在常温下浸渍 3 ~ 5 min。 |
英文摘要: |
The replacement copper plating on the phosphating film was carried out in copper sulfate solution. The results showed that it爷 s feasible to plate copper on phosphating film. After plating the strength and the corrosion resistance of the as-prepared phosphating film can be increased. The time of the plating should be short and the concentration of the copper sulfate should be low. The suggested experiment parameters are listed as follows: the concentration of copper sulfate is 2 % , the temperature is room temperature and the time is 3 ~ 5 min. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|