项坤,王维,杨光,卞宏友,钦兰云,王伟,尚纯,崔宝磊.钛合金单道激光熔覆工艺的研究[J].表面技术,2013,42(1):91-93,104. XIANG Kun,WANG Wei,YANG Guang,BIAN Hong-you,QIN Lan-yun,WANG Wei,SHANG Chun,CUI Bao-lei.Study on Titanium Alloy Single Track Laser Cladding Process[J].Surface Technology,2013,42(1):91-93,104 |
钛合金单道激光熔覆工艺的研究 |
Study on Titanium Alloy Single Track Laser Cladding Process |
投稿时间:2012-09-06 修订日期:2012-09-30 |
DOI: |
中文关键词: 钛合金 激光熔覆成形 几何尺寸 工艺参数 |
英文关键词:titanium alloy laser cladding forming geometric size process parameters |
基金项目:辽宁省高校创新团队项目( LT2011004 ) ; 辽宁省自然科学基金项目 ( 201202173 ) ; 中航工业产学研创新工程项目( CXY2011SH16) ;辽宁省教育厅科学技术研究项目( L2011026) |
|
Author | Institution |
XIANG Kun | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
WANG Wei | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
YANG Guang | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
BIAN Hong-you | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
QIN Lan-yun | School of Mechanical and Electrical Engineering,Shenyang Aerospace University, Shenyang 110136 , China |
WANG Wei | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
SHANG Chun | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
CUI Bao-lei | Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process,Shenyang Aerospace University, Shenyang 110136 , China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
为获得钛合金单道单层激光熔覆的最优工艺参数,采用正交实验方法,进行激光熔覆成形试验。先找出激光功率、扫描速度和送粉速率对熔覆层几何尺寸的影响规律,再对比不同工艺条件所得熔覆层的表面及截面质量。 通过对比分析,得到一组用于单道单层激光熔覆的最佳工艺参数组合,为以后激光熔覆成形试验提供了数据参考。 |
英文摘要: |
In order to obtain the best process parameters of the titanium alloy single-track and single-layer laser cladding, the orthogonal experiment method was used, and have designed laser cladding forming test, found out the influencing rule of laser power, scanning speed and powder feed rate on the cladding layer geometric size. And contrast different process conditions of the cladding layer surface and cross section爷 s quality,through the contrast analysis, get a group of fine process parameters for single-track and single-layer cladding and provide data reference for later laser cladding forming test . |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|