马春宇,袁军平,薄海瑞,吴海超.工艺参数及前后处理对 Cu-Se 系铜合金化学着色的影响[J].表面技术,2013,42(1):46-49. MA Chun-yu,YUAN Jun-ping,BO Hai-rui,WU Hai-chao.Influence of Processing Parameter and Pre-post Treatment on Chemical Coloration Effect of Copper Alloy by Cu-Se Component[J].Surface Technology,2013,42(1):46-49 |
工艺参数及前后处理对 Cu-Se 系铜合金化学着色的影响 |
Influence of Processing Parameter and Pre-post Treatment on Chemical Coloration Effect of Copper Alloy by Cu-Se Component |
投稿时间:2012-10-28 修订日期:2012-12-25 |
DOI: |
中文关键词: 化学着色 铜合金 Cu-Se 工艺参数 着色前处理 着色后处理 |
英文关键词:chemical coloration copper alloy Cu-Se processing parameters pretreatment before coloration post-processing after coloration |
基金项目:广州市教育系统首批建设创新学术团队项目( 穗教科 2009-11) |
作者 | 单位 |
马春宇 | 广州番禺职业技术学院 珠宝学院, 广州 511483 |
袁军平 | 广州番禺职业技术学院 珠宝学院, 广州 511483 |
薄海瑞 | 广州番禺职业技术学院 珠宝学院, 广州 511483 |
吴海超 | 广州番禺职业技术学院 珠宝学院, 广州 511483 |
|
Author | Institution |
MA Chun-yu | Jewelry School,Guangzhou Panyu Polytechnic, Guangzhou 511483 , China |
YUAN Jun-ping | Jewelry School,Guangzhou Panyu Polytechnic, Guangzhou 511483 , China |
BO Hai-rui | Jewelry School,Guangzhou Panyu Polytechnic, Guangzhou 511483 , China |
WU Hai-chao | Jewelry School,Guangzhou Panyu Polytechnic, Guangzhou 511483 , China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
以 Cu-Se 系铜合金化学着色液为对象,通过检测着色膜层的颜色,观察着色膜的均匀性和表面形貌,研究了着色液 pH 值、着色温度、着色时间等工艺参数及抛光、除油、擦拭等着色前后处理方法对最终着色质量的影响。 研究结果表明:pH 值和着色温度对着色膜的颜色和均匀性影响显著,最佳 pH 值为 1 . 5 ~ 2 ,最佳着色温度为 20 ~ 30 ℃ ;着色时间对着色膜层的颜色影响显著,对均匀性没有影响,时间越长,膜层越趋于黑色。 |
英文摘要: |
The effects of processing parameters including pH, temperature, time, and processing methods including polishing, wiping on coloration quality were investigated by color testing, optical microscope and SEM test . The results show that coloration quality is influenced notably by pH and temperature, processing parameter with pH at 1 . 5 ~ 2 and temperature at 20 ℃ ~ 30 ℃ is the best one, moreover, the color of thin film become black and uniformity of thin film keep steady along with the coloring time increases. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|