罗庆,王利华,普学仁,肖海.高耐蚀性镀硬铬工艺研究[J].表面技术,2012,(5):99-101.
LUO Qing,WANG Li-hua,PU Xue-ren,XIAO Hai.Research on High Anti-corrosion Hard Chromium Plating Process[J].Surface Technology,2012,(5):99-101 |
| 高耐蚀性镀硬铬工艺研究 |
| Research on High Anti-corrosion Hard Chromium Plating Process |
| 投稿时间：2012-05-03 修订日期：2012-10-20 |
| DOI： |
| 中文关键词: 合金钢 镀硬铬 耐蚀性 |
| 英文关键词:alloy steel hard chromium plating anti-corrosion |
| 基金项目: |
| 作者 | 单位 |
| 罗庆 | 成都飞机工业(集团)有限责任公司,成都610092 |
| 王利华 | 成都飞机工业(集团)有限责任公司,成都610092 |
| 普学仁 | 成都飞机工业(集团)有限责任公司,成都610092 |
| 肖海 | 成都飞机工业(集团)有限责任公司,成都610092 |
|
| Author | Institution |
| LUO Qing | Chengdu Aircraft Industry(Group)Company, Chengdu 610092, China |
| WANG Li-hua | Chengdu Aircraft Industry(Group)Company, Chengdu 610092, China |
| PU Xue-ren | Chengdu Aircraft Industry(Group)Company, Chengdu 610092, China |
| XIAO Hai | Chengdu Aircraft Industry(Group)Company, Chengdu 610092, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 针对空客生产的A320机型合金钢零件镀硬铬层高耐腐蚀性的要求,研究了一种高耐蚀性镀硬铬工艺,所获得的镀铬层硬度为750~980HV,并且通过了750h的盐雾试验,满足空客技术要求。研究还发现,特殊的电镀硬铬工艺,尤其是镀铬后的HA 油除氢、磨削等是提高硬铬镀层耐腐蚀性能的关键。该工艺目前已在工厂的批量生产中获得应用。 |
| 英文摘要: |
| Based on the requirement of high anti-corrosion of Airbus A320 alloy steel parts hard chrome plating, the hard chromium plating process for low alloy steels was investigated. This achieved chromium layer had high hardness(750~980HV), could pass 750 h salt spray test and meet the airbus technical requirement. It was also found that hydrogen relief with HA oil and grinding procedures were the key points to improve its corrosion resistance. This high anti-corrosion hard chromium plating process has already been applied on serial production of Airbus A320 model. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号