侯峰岩,吕春雷.连铸结晶器铜板表面处理关键技术的研究与应用[J].表面技术,2012,(4):63-65.
HOU Feng-yan,LYU Chun-lei.Research and Application of Key Technologies of Continuous Casting Mould Surface Treatment[J].Surface Technology,2012,(4):63-65 |
| 连铸结晶器铜板表面处理关键技术的研究与应用 |
| Research and Application of Key Technologies of Continuous Casting Mould Surface Treatment |
| 投稿时间：2012-04-11 修订日期：2012-08-20 |
| DOI： |
| 中文关键词: 连铸结晶器 表面处理技术 前处理 热解析 |
| 英文关键词:continuous casting mould surface treatment technology pre-treatment thermal analysis |
| 基金项目: |
| 作者 | 单位 |
| 侯峰岩 | 上海宝钢工业技术服务有限公司机械制造分公司,上海201900 |
| 吕春雷 | 上海宝钢工业技术服务有限公司机械制造分公司,上海201900 |
|
| Author | Institution |
| HOU Feng-yan | Machinery Manufacturing Branch, Shanghai Baosteel Industry Technological ServicesCo., Ltd., Shanghai 201900, China |
| LYU Chun-lei | Machinery Manufacturing Branch, Shanghai Baosteel Industry Technological ServicesCo., Ltd., Shanghai 201900, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 结晶器涂镀前处理、表面涂镀层和涂层结构设计,是结晶器表面处理的关键技术。采用一步脱脂、刻蚀前处理工艺与采用传统前处理工艺相比,工件表面不仅粗糙度更高,而且更均匀。考察了几种结晶器表面涂镀层的热稳定性和耐磨损性能,喷涂涂层和Co-Ni镀层具有很好的热稳定性能和耐磨损性能,并具有良好的使用实绩。表面涂层的结构设计,包括涂层的厚度及厚度分布、多种涂层的组合使用等,都会显著影响结晶器的使用寿命。 |
| 英文摘要: |
| Pre-treatment of coating, types of coating and coating structure design are the key technologies for the mold surface treatment. Compared with the conventional pre-treatment process, one step degreasing,etching pre-treatment process can make the product surface not only roughness higher but also more uniform; The thermal stability and wear resistance of coatings are investigated. The spray coating and Co-Ni coating have good thermal stability and wear resistance, and have a good use of performance; Coating structure design, including the size and distribution of coating thickness, and application of composite structure coating, will significantly affect the life of continuous casting mould. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号