易承波,欧阳东,鲁刘磊.钢渣作船体喷砂除锈磨料的可行性研究[J].表面技术,2010,39(4):91-93,105.
YI Cheng-bo,OU Yang-dong,LU Liu-lei.The Study on Feasibility of Steel Slag Abrasive Used in Shot Peening Derusting in Hull[J].Surface Technology,2010,39(4):91-93,105 |
| 钢渣作船体喷砂除锈磨料的可行性研究 |
| The Study on Feasibility of Steel Slag Abrasive Used in Shot Peening Derusting in Hull |
| 投稿时间：2010-03-29 修订日期：2010-08-10 |
| DOI： |
| 中文关键词: 船体 钢渣 喷砂 除锈 磨料 |
| 英文关键词:hull steel slag shot peening derusting abrasive |
| 基金项目:广东省重大科技专项计划项目 |
|
|
| Author | Institution |
| YI Cheng-bo | 1.College of Science and Engineering, Jinan University, Guangzhou 510632, China;2.MOE Key Lab of Disaster Forecast and Control in Engineering, Guangzhou 510632, China |
| OU Yang-dong | 1.College of Science and Engineering, Jinan University, Guangzhou 510632, China;2.MOE Key Lab of Disaster Forecast and Control in Engineering, Guangzhou 510632, China |
| LU Liu-lei | 1.College of Science and Engineering, Jinan University, Guangzhou 510632, China;2.MOE Key Lab of Disaster Forecast and Control in Engineering, Guangzhou 510632, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 随着船舶工业的发展,船体除锈技术越来越受到重视。喷砂除锈是当今世界上修船用得最为普遍的船体除锈工艺,为了达到一定的除锈质量与标准,要求选用合适的除锈磨料。从钢渣的来源、含尘量、游离SiO2含量、粒度、棱角、硬度、除锈效果、价格等方面探讨了在船体喷砂除锈中采用钢渣磨料的可行性,发现钢渣磨料具有良好的综合效益和广阔的应用前景。 |
| 英文摘要: |
| With the development of shipbuilding industry, pay attention to the technology of hull rust. Shot peening derusting is the most widely used in derusting technology in hull in the world today.In order to achieve a certain degree of rust quality and standards,we must select the appropriate abrasive. The feasibility of use of steel slag abrasive in shot peening derusting in hull from the steel source, free silicon content, particle size, angularity, hardness, rust effects, price, etc. was studied. The test results show that steel slag abrasive has good comprehensive benefits and broad prospects. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号