柯知勤,吴浩杰,宋振纶.pH和柠檬酸钠含量对变形锌合金镀镍层质量的影响[J].表面技术,2010,39(4):18-20.
KE Zhi-qin,WU Hao-jie,SONG Zhen-lun.Influence of pH and Content of Sodium Citrate on the Nickel-coating Quality of Deformed Zinc Alloy[J].Surface Technology,2010,39(4):18-20
pH和柠檬酸钠含量对变形锌合金镀镍层质量的影响
Influence of pH and Content of Sodium Citrate on the Nickel-coating Quality of Deformed Zinc Alloy
  修订日期:2010-08-10
DOI:
中文关键词:  ZAT10变形锌合金  电镀镍  pH值  柠檬酸钠
英文关键词:ZAT10 deformed zinc alloy  Ni electroplating  pH value  sodium citrate
基金项目:国家科技支撑计划(2009BAE71B05);宁波市重大科技计划(2008B10026)
作者单位
柯知勤 中国科学院宁波材料技术与工程研究所,宁波315201 
吴浩杰 中国科学院宁波材料技术与工程研究所,宁波315201 
宋振纶 中国科学院宁波材料技术与工程研究所,宁波315201 
AuthorInstitution
KE Zhi-qin Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
WU Hao-jie Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
SONG Zhen-lun Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China 
摘要点击次数:
全文下载次数:
中文摘要:
      固定其它工艺参数,改变镀液pH值和柠檬酸钠含量对ZAT10变形锌合金进行电镀镍,通过金相显微镜、场发射扫描电镜(SEM-EDS)和超景深三维显微镜记录镀镍层的形貌,以镀液稳定性、镀层表观合格性和出现裂纹与否为依据,对整个实验区进行划分,获得了关于镀液pH值-镀液柠檬酸钠含量与镀液稳定性和镀层性能的关系示意图,并结合EDS分析镀层成分和涂膏法、热震试验分析镀层性能的结果,最终确定了示意图上镀液稳定、镀层质量好的区域。
英文摘要:
      After regulating the other technological parameter, changing the pH value and sodium citrate content, the ZAT10 deformed zinc alloy was electroplated with Ni. The morphology of nickel coating was recorded with optical microscopy, scanning electron microscopy(SEM-EDS)and ultra-depth three-dimensional microscopy. Based on the stability of electroplating solution and surface property, the test region was classified.And the schematic diagram of pH-so-dium citrate content of electroplating solution vs stability of electroplating solution and coating property was obtained. The optimal region with stability plating solution and good coating on the diagram was defined by the results of plating composition analysis obtained by EDS and coating property analysis obtained by paste method and thermal shock test.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20720862位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号