高丽敏,王振玲,董胜敏.球磨参数对机械合金化制备碳化硅粉体的影响[J].表面技术,2010,39(2):50-51,76.
GAO Li-min,WANG Zhen-ling,DONG Sheng-min.Effects of Ball Milling Techniques on SiC Powder by Mechanical Alloying[J].Surface Technology,2010,39(2):50-51,76 |
| 球磨参数对机械合金化制备碳化硅粉体的影响 |
| Effects of Ball Milling Techniques on SiC Powder by Mechanical Alloying |
| 修订日期：2010-04-10 |
| DOI： |
| 中文关键词: 热力学计算 机械合金化 球磨 |
| 英文关键词:theremodynamics count mechanical alloying ball malling |
| 基金项目: |
| 作者 | 单位 |
| 高丽敏 | 黑龙江科技学院,哈尔滨150027 |
| 王振玲 | 黑龙江科技学院,哈尔滨150027 |
| 董胜敏 | 黑龙江科技学院,哈尔滨150027 |
|
| Author | Institution |
| GAO Li-min | Heilongjiang University of Science and Technology, Harbin 150027, China |
| WANG Zhen-ling | Heilongjiang University of Science and Technology, Harbin 150027, China |
| DONG Sheng-min | Heilongjiang University of Science and Technology, Harbin 150027, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 通过热力学计算分析石英与石墨反应的可行性。研究了机械合金化石英与石墨混合粉末的过程中,球磨工艺(球磨时间、球料比)对机械合金化过程的影响。试验结果表明,采用球料比50∶1,球磨机转速为300r/min,球磨时间为72 h时,体系提供了足够的能量生成碳化硅。 |
| 英文摘要: |
| SiO2and C's react is analysised by theremodynamics count, The influences of ball milling techniques (ball minlling time, ball-to-powder mass ratio)on Mechanical Alloying of SiO2and C mixed powders, in the process the alloying,is invested. The results show that the higher ball milling energy may be obtained when the ball-to-powder mass ratio is 50∶1, and rotation speed is 300 r/min. The solid-state reaction between SiO2and C can be activated to compose SiC, with mechanical alloy in 72 hours. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号