汤文博,郭云刚,魏建军,黄智泉.NbC-TiC耐磨高抗裂堆焊焊条的优化设计[J].表面技术,2008,37(6):36-38.
TANG Wen-bo,GUO Yun-gang,WEI Jian-jun,HUANG zhi-quan.Optinmm Design of NbC-TiC Surefacing Electrode with Anti-wearing and Anti-cracking[J].Surface Technology,2008,37(6):36-38 |
| NbC-TiC耐磨高抗裂堆焊焊条的优化设计 |
| Optinmm Design of NbC-TiC Surefacing Electrode with Anti-wearing and Anti-cracking |
| 投稿时间：2008-09-01 修订日期：2008-12-10 |
| DOI： |
| 中文关键词: 堆焊 优化设计 抗裂性 耐磨性 |
| 英文关键词:Hard-facing Optimum design Anti-cracking Wear resistance |
| 基金项目: |
| 作者 | 单位 |
| 汤文博 | 郑州大学材料科学与工程学院，河南郑州450001 |
| 郭云刚 | 郑州大学材料科学与工程学院，河南郑州450001 |
| 魏建军 | 郑州机械研究所，河南郑州450001 |
| 黄智泉 | 郑州机械研究所，河南郑州450001 |
|
| Author | Institution |
| TANG Wen-bo | School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China |
| GUO Yun-gang | School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China |
| WEI Jian-jun | Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou 450001, China |
| HUANG zhi-quan | Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou 450001, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为了提高材料表面的耐磨料磨损性能，对自制的NbC-TiC系堆焊焊条进行了正交优化设计。采用光谱仪、洛氏硬度计、光学显微镜、扫描电镜、EDAX能谱以及磨损试验机分析了堆焊层的成分、组织和性能，结果表明，优化焊条的堆焊层成分为：0.6%C、3.0% Cr、1.5% Nb、0.4% Mo3硬度达到HRC59.1，堆焊层组织为混合型马氏体和少量残余奥氏体+弥散分布的NbC-TiC。该焊条具有高抗裂性，焊前不预热，焊后不缓冷，连续堆焊不产生裂纹的特点。 |
| 英文摘要: |
| To improve the abrasive grain wearability of materials, the orthogonal design has been applied to the self-designed NbC-TiC series surfacing electrode. The microstructure and properties were analyzed by means of OE, rockwell hardness meter, OM, SEM, EDAX and sand paper abrasion test. The results show that the content of the deposited metal of optimization electrode is CO. 60/o ,Cr3. 0010 ,Nbl. 50/o ,M00.40/o , and hardness up to HRC58. 9. The microstructure is the mixed martensite and a little retained austenite with NbC-TiC which are dispersively distributed in the matrix. A kind of surfacing electrode with anti-wearing and anti-cracking has been developed, which the surfacing metal is crack-free even under the conditions of non-preheating and non-postheating. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号