张文峰.利用脉冲电铸技术制备含纳米颗粒的梯度功能材料[J].表面技术,2008,37(5):55-57.
ZHANG Wen-feng.Study on Preparation of Functional Gradient Material Contained Nano-particles by Pulse Electrofornung[J].Surface Technology,2008,37(5):55-57 |
| 利用脉冲电铸技术制备含纳米颗粒的梯度功能材料 |
| Study on Preparation of Functional Gradient Material Contained Nano-particles by Pulse Electrofornung |
| 投稿时间：2008-07-12 修订日期：2008-10-10 |
| DOI： |
| 中文关键词: 脉冲复合电铸 纳米颗粒 复合量 表面形貌 梯度功能材料 |
| 英文关键词:Pulse composite-electroforming Nano-particles Content, Surface morphology Functional gradient material( FGM) |
| 基金项目:国防基础研究基金资助项目( J1500E002)；江苏省自然科学基金重点资助项目( BK2004005) |
| 作者 | 单位 |
| 张文峰 | 1．苏州职业大学机电系，江苏苏州215011;2.西安工业大学机电学院，陕西西安710032 |
|
| Author | Institution |
| ZHANG Wen-feng | 1. Department of Mechanical and Electrical Engineering, Suzhou Vocational College, Suzhou 215011, China; 2. College of Mechanical and Electrical Engineering, Xi' an Technological University, Xi' an 710032, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为探讨利用脉冲电沉积技术制备含有纳米颗粒的梯度功能材料，分析了脉冲电沉积过程中的主要工艺参数，研究了占空比对复合电铸层表面形貌的影响，通过控制电沉积时间和镀液中纳米Zr02悬浮量制备了纳米复合电铸层，并对其横截面进行了SEM观察和组成成分测定。结果表明：通过控制脉冲复合电铸过程中的工艺参数可以制备出由纳米颗粒复合量变化而导致其组织成分呈梯度分布的纳米功能梯度材料，由此得到利用脉冲电铸技术制备含有纳米颗粒的FGM的新工艺。 |
| 英文摘要: |
| The processing parameter of pulse composite electroforming was discussed. The effect of duty ratio on surface morphology of nano-composite electroforming deposits was analyzed. Nano-composite electroforming deposits were prepared by controlling time and Zr02 concentration in electrolyte. SEM and EDS were used for the examination of crosssection morphology and the component of nano-composite electroforming deposits. The results show that the preparation of functional gradient material( FGM) with gradient component is carried out by controlling process parameters. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号