彭正全,薛文功.冲压用冷轧奥氏体不锈钢带的表面质量控制[J].表面技术,2007,36(6):93-96.
PENG Zheng-quan,XUE Wen-gong.Surface Quality Control of Cold Rolled Austenitic Stainless Stell Strip for Deep Drawing[J].Surface Technology,2007,36(6):93-96 |
| 冲压用冷轧奥氏体不锈钢带的表面质量控制 |
| Surface Quality Control of Cold Rolled Austenitic Stainless Stell Strip for Deep Drawing |
| 投稿时间：2007-08-27 修订日期：2007-12-10 |
| DOI： |
| 中文关键词: 不锈钢 奥氏体 冷轧 深冲 质量控制 |
| 英文关键词:Stainless steel Austenitic Cold rolling Deep draw Quality control |
| 基金项目: |
| 作者 | 单位 |
| 彭正全 | 1．北京科技大学，北京100083；2.酒泉钢铁（集团）公司不锈钢厂，甘肃嘉峪关735100 |
| 薛文功 | 酒泉钢铁（集团）公司不锈钢厂，甘肃嘉峪关735100 |
|
| Author | Institution |
| PENG Zheng-quan | 1. Beijing University of Science and Technology, Beijin 100083, China;2. Stainless Steel Plant of Jiuquan Iron & Steel Corp. , Jiayuguan 735100, China |
| XUE Wen-gong | Stainless Steel Plant of Jiuquan Iron & Steel Corp. , Jiayuguan 735100, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 介绍了冷轧薄板的典型冲压成形方式，结合冷轧不锈钢带基本成形性能与冲压性能的关系，探讨了组织、成分、冷轧工艺、表面质量等因素对冷轧奥氏体不锈钢带冲压性能的影响。提出冲压用冷轧奥氏体不锈钢带要适当增加Ni、Cu含量，减少8铁素体，控制晶粒度，并对冷轧压下率、厚度精度、表面粗糙度、表面缺陷进行控制，以满足冲压要求。 |
| 英文摘要: |
| The typical pressing process was illustrated, the influence of the microstructure, chemical composition, cold rolling technology, surface quality, etc. was discussed upon the deep drawing property of cold rolled austenitic stainless steel strip. In order to satisfy the deep drawing requirement, the approach of adding Ni/Cu, reducing 8Ferrite, controlling the grain size, and controlling the cold rolling reduction rate, accuracy of thickness, surface roughness, surface defects etc was proposed. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号